LANDROVER

Model
Year
Engine
Category
0.0
In stock
$350.00
($385.00 inc tax)
+
Land Rover Defender / Discovery 1 HD Maxi-Drive Flange Set Land Rover HD MaxiDrive Probally one of the best HD Drive Flangers On The Market Today. Price is Per Pair Suits All Defender Front And Rear on Standard Axles.  To suit: Land Rover Defenders 1994 Onwards With Disk Brakes All Round Land Rover Discovery 1
Save 22%
0.0
In stock
$32.00 $25.00
You save: $7.00 ($27.50 inc tax)
+
Land Rover Defender/Discovery TD5 Air Filter Mahle LR027408
Fits ALL DEFENDERS, DISCOVERY 1 1989 - 1998 and RANGE ROVER CLASSIC. Increase the body clearance to allow the fitment of really big tyres as well as provide an additional 50mm of lift to your suspension. These simple spacers bolt between the coil spring and the axle and can be the perfect way to lift the vehicle to the desired ride height when the load or equipment carried exceeds even the heaviest rated coil springs.
0.0
In stock
$646.36
($711.00 inc tax)
+
Consists of:1 x Assembled ladder1 x Z-bracketBolt kitMaterials used:304 Stainless steelElectroplated and black powder coatedWeight:4kg (8.8lbs)
ModelDISCOVERY Year2006
Save 7%
0.0
In stock
$350.00 $325.00
You save: $25.00 ($357.50 inc tax)
+
For Discovery 2’s with rear air suspension this simple kit will increase ground clearance and tyre to body clearance. If the rear air springs are to be retained to maintain the self-levelling facility these spacer kits are the perfect solution for achieving a 50mm lift. The front kit compliments the rear perfectly.
Save 17%
0.0
In stock
$350.00 $292.00
You save: $58.00 ($321.20 inc tax)
+
LAND ROVER DISCOVERY 3 & 4 AND RANGE ROVER SPORT CASTOR BUSHES The castor bush is made from a metal outer case and rubber insert. This bush will stop suspension rattle and will allow a one time only replacement. Sold as a pair.
ModelDISCOVERY CategoryAXLES & SUSPENSION, DRIVETRAIN, STEERING SYSTEM
Free shipping
0.0
In stock
$3,523.64
($3,876.00 inc tax)
+
Consists of:1 x Front Runner Drawer unit (SSDR002)1 x Land Rover Discovery LR3 LR4 Drawer Deck Completion Set2 x Push to Close latch with 2 keys per lock3 x Accessory Channels6 x Eye Nuts for Accessory Channel1 x T Wrench with 2 custom sockets for wheel winderInstallation Hardware including 4 turnbuckles to secure unit to vehicleFitting InstructionMaterials used:Aluminum - Accessory Channels Sub FrameBlack powder coated steel - Drawer Bins FrameCarpet Laminated plywood - Top Deck Deck SetProduct Dimensions:Closed:972mm (38.3) L x 1230mm (48.4) W x 328mm (12.9) HOpen:1896mm (74.7) L x 1230mm (48.4) W x 328mm (12.9) HInterior Drawer Dimensions:Left Hand Drawer:914mm (36) L x 461mm (18.2) W x 208mm (8.2) HRight Hand Drawer:914mm (36) L x 373mm (14.7) W x 208mm (8.2) HWeight:80.3Kg (177lbs)Load Rating:113Kg (250lbs) per DrawerSpecial Notes:Supplied with a T-wrench and 2 custom sockets for operating the wheel winder through the drawer system.
Free shipping
0.0
In stock
$2,931.82
($3,225.00 inc tax)
+
Consists of:1 x Drawer base unit (SSDR003)1 x Land Rover Discovery Sport Deck Completion Set2 x Push to close latch with 2 keys per lock 3 x Accessory channels6 x Eye Nuts for accessory channelsInstallation HardwareFitting InstructionMaterials used:Aluminum - Accessory Channels Sub FrameBlack powder coated steel - Drawer Bins FrameUV resistant nylon Carpet Laminated Plywood - Top Deck Side DeckProduct Dimensions:857mm (33.7) L x 1215mm (47.8) W x 331mm (13) HInterior Drawer Dimensions:Left Hand Drawer:717mm (28.2) L x 348mm (13.7) W x 210mm (8.3) HRight Hand Drawer:717mm (28.2) L x 448mm (17.6) W x 210mm (8.3) HWeight:72.42kg (159.7lbs)Load Rating:113Kg (250lbs) per DrawerSpecial Notes:3 Drawer Dividers (SSCA048) can fit each Drawer
Save 45%
0.0
In stock
$200.00 $110.00
You save: $90.00 ($121.00 inc tax)
+
LAND ROVER MOULDING - WINDSHIELD - Range Rover 2002 - 2009, Range Rover 2010 - 2012. Genuine OEM DCB500172PNP - Land Rover Moulding - Windshield (DCB500172PNP) part for Range Rover 2002 - 2009, Range Rover 2010 - 2012. Authentic Land Rover Part. Not Second Hand Just Old Stock
Save 45%
0.0
In stock
$200.00 $110.00
You save: $90.00 ($121.00 inc tax)
+
LAND ROVER MOULDING - WINDSHIELD - Range Rover 2002 - 2009, Range Rover 2010 - 2012. Genuine OEM DCB500162PNP - Land Rover Moulding - Windshield (DCB500162PNP) part for Range Rover 2002 - 2009, Range Rover 2010 - 2012. Authentic Land Rover Part. Price for 1 not both. Not Second Hand Just Old Stock
0.0
In stock
$647.27
($712.00 inc tax)
+
Consists of:1 x Land Rover New Defender Side Mount LadderInstallation HardwareFitting Instructions Materials used:Black powder coated steel Product Dimensions:Closed:295mm (11.6'') L x 215mm (8.5'') W x 860mm (33.9'') H Open:295mm (11.6'') L x 215mm (8.5'') W x 1320mm (52'') H Weight:12.9kg (28.4lbs)
Free shipping
0.0
In stock
$2,417.27
($2,659.00 inc tax)
+
KRLD034T - Land Rover New Defender(2020-Current) 110 Slimline II Roof Rack Kit - by Front Runner Consisting of: 1x FALD008 - Land Rover Defender L663 (2020-Curr) Foot Rails1x RRSTD11 - SLII Tray - 1255mm(W)X2166mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 43.97kg (96.94lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17'')Length: 1730mm (68'')Height: 245mm (10'')Shipping Weight:Weight: 42kg (92lbs)
Free shipping
0.0
In stock
$1,176.36
($1,294.00 inc tax)
+
Consists of:1 x Cargo Slide1 x Cargo Slide MountInstallation HardwareFitting Instruction Materials used:Black powder coated steel Product Dimensions:851mm (33.5'') L x 1087mm (42.8'') W x 170mm (6.7'') H Internal Drawer Dimensions:778mm (30.6'') L x 780mm (30.7'') W x 60mm (2.4'') H Weight:39.19kg (86.4lbs) Load Rating:113kg (250lbs)
Free shipping
0.0
In stock
$2,095.46
($2,305.01 inc tax)
+
KRLD039T - Land Rover New Defender 90 (2020-Current) Slimline II Consisting of: 1x FALD010 - Land Rover Defender 90 (2020-Current) Foot Rails1x RRSTD09 - SLII Tray - 1255mm(W)X1762mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 37.28kg (82.19lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17'')Length: 1730mm (68'')Height: 255mm (10'')Shipping Weight:Weight: 38kg (84lbs)
0.0
In stock
$1,613.64
($1,775.00 inc tax)
+
KRLD037T - Land Rover New Defender(2020-Current) 110 w/OEM Tracks Slimline II Roof Rack Kit - by Front Runner Consisting of: 3x FASS017 - Foot Set / 75mm-85mm3x RRAC930 - Land Rover New Defender (L663) OEM Track Mount Kit1x RRSTD08 - SLII Tray - 1255mm(W)X1560mm(L)1x WDST010 - Wind Deflector 20mm Lip Narrow Pair /1255mm(W) Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 27.51kg (60.65lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17'') Length: 1730mm (68'') Height: 150mm (6'') Shipping Weight: Weight: 27.6kg (61lbs)
0.0
In stock
$455.46
($501.01 inc tax)
+
KRLD038 - Land Rover New Defender(2020-Current) 90/110 Load Bar Kit Consisting of: 2x FASS017 - Foot Set / 75mm-85mm1x LBSK014 - Roof Load Bar Pair 1255mm(W)1x RRAC044 - Slat to Load Bar Conversion end Cap Kit2x RRAC930 - Land Rover New Defender (L663) OEM Track Mount KitMaterial Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 6.1kg (13.45lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8'') to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8'') to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8'') to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 150mm (6'')Length: 1385mm (55'')Height: 145mm (6'')Shipping Weight:Weight: 5.89kg (13lbs)
Save 31%
0.0
In stock
$800.00 $550.00
You save: $250.00 ($605.00 inc tax)
+
Add roof carrying capability to your LR3 or LR4. This roof rail kit works in conjunction with the roof crossbar kit  (VPLAR0001) and gives the added capability of carrying anything from bikes, kayaks, skis, cargo boxes, etc. Crossbars pictured but not included. It comes complete with screws. Fits: Discovery 3 Discovery 4 Not second hand just old stock
Save 7%
0.0
In stock
$16,200.00 $15,000.00
You save: $1,200.00
+
Landrover Discovery 3 - 2008 -6 Months Rego Exp 10 June 2024 -261000kms -Just serviced by Davis Performance Landy's (Next service due at 272000kms)
0.0
In stock
$47.27
($52.00 inc tax)
+
Consists of:1 x LED Rock Light 4.5W Materials used:Black plastic Product Dimensions:99mm (3.9'') L x 51mm (2'') W x 54mm (2.1'') H Weight:85g (3oz)
Save 10%
0.0
In stock
$1,600.00 $1,440.00
You save: $160.00 ($1,584.00 inc tax)
+
LH Headlight for Land Rover Freelander 2. Genuine part. Not second hand just old stock.
Save 16%
0.0
In stock
$65.60 $55.00
You save: $10.60 ($60.50 inc tax)
+
Year2005 Engine3.0LT V6 PETROL, 4.0LT V6 PETROL, 4.4LT V8 PETROL, 5.0LT V8 PETROL, 2.7LT TDV6, 3.0LT TDV6
Show another 21 products
Product filters
Model
Year
    Show all (33)
Engine
    Show all (22)
Category