MODIFICATION

2.2Lt Engine Oil Cooler & Spin-on Oil Filter Conversion Kit - For vehicles with Factory Fitted metal Oil Filter.

The Hybrid consists of a standard Garrett turbocharger with 28% larger intake wheel & 10% larger exhaust wheel. This upgrade combined with our upgraded software, Inter-cooler, Exhaust & air intake modification.

2.2Lt & 2.4Lt Engine Oil Cooler & Spin-on Oil Filter Conversion Kit - For vehicles with Factory Fitted Plastic Oil Filter cartridge. Note: Image for illistration purpose only.  

Samco silicone hoses are made to the highest standards, using a tough 4 ply construction. These hoses are a direct replacement of your existing boost hoses making it very easy to change yourself.

A kit of parts to increase the 300 Tdi engines capacity to 2785cc from 2495cc. Based around many of the International HS2.8 internal parts, this kit increases the cubic capacity of the 300Tdi from 2.5 litres to 2.8 litres. This is achieved by increasing the bore and stroke,  HS 2.8 – 93mm bore and 102.5mm stroke. ‘300’ Tdi – 90.47mm bore and 97mm stroke

Package contains: 1X Fully Reconditioned modified Injector pump 1X Exhaust System 1X Turbo 1X Manifold 1X Silicon Hose Kit This modification gives more torque down low at 1300 RPM and more power up high. (see Dyno Spec's) The modification is achieved by variable vane turbo and modified injected pump to suit power down low and up high.

Fits all Defender Models Bilstein Australia have developed an easy bolt-in steering damper for users wanting the extra benefits for a vehicle that is used on the road as well as off it. Helps prevent steering shake over rough surfaces.

BONNET GUARD PROTECTOR LANDROVER DISCOVERY 1 -  2 DOOR & 4 DOOR 1990 - 1994 Genuine part - Brand new - still in original packaging.

When tackling a ledge or attacking steep descent’s, you always run the risk of damaging your Defender's rear end, especially on the 110 wheel base. The Bumperette's act as corner protectors, protecting both the vehicle's body & tail lights while also providing a step For roof top access.  

Made from copper unlike the original which lasts longer. A big advantage is that it will take up some distortion that might be present on the manifold saving replacement costs of an entire manifold.

Defender - Door Closing Handles Black Finish (Pair) This product offers a quality appearance to the interior of your vehicle, the handles are machined with great detail.

Defender - Door Closing Handles Polished Finish (Pair) This product offers a quality appearance to the interior of your vehicle, the handles are machined with great detail.

Defender - Door Locking Pegs (Pair)

Defender - Door Opening Handle Assembly Designed and manufactured with precision these are a direct replacement for the plastic originals. The opening handle is machined from billet aluminium and has intricate detail machined into it with rounded edges and curved contours giving a true quality appearance to the door of your vehicle.

Defender - Door Opening Handle Back Plates (Pair) These opening handle back plates are designed and manufactured specifically as a direct replacement for the plastic originals. The back plate is machined from billet aluminium and has intricate detail machined into it with rounded edges and curved contours giving a true quality appearance to the door of your vehicle.

DEFENDER 110 Lowered Height Comfort Kit After many years and thousands of pounds worth of development, Alive Tuning's comfort springs take away the harshness felt from imperfections of the road surface, providing a smooth ride and also improving the handling of the vehicle greatly, especially with our Uprated Rear Anti Roll bar and Bilstein B6 or Fox 2.0 dampers.

DEFENDER 110 Standard Height Comfort Kit After many years and thousands of pounds worth of development, Alive Tuning's comfort springs take away the harshness felt from imperfections of the road surface, providing a smooth ride and also improving the handling of the vehicle greatly, especially with our Uprated Rear Anti Roll bar and Bilstein B6 or Fox 2.0 dampers.

DEFENDER 2.2 DE-CAT PIPE This De-cat pipe for 2.2 Defenders will make the vehicle breathe better and also stop excessive heat from the cat coming into the vehicle.

DEFENDER 2.4 DE-CAT PIPE This De-cat pipe for 2.4 Defenders will make the vehicle breathe better and also stop excessive heat from the cat coming into the vehicle.

DEFENDER 90 Lowered Height Comfort Kit After many years and thousands of pounds worth of development, Alive Tuning's comfort springs take away the harshness felt from imperfections of the road surface, providing a smooth ride and also improving the handling of the vehicle greatly, especially with our Uprated Rear Anti Roll bar and Bilstein B6 or Fox 2.0 dampers.

DEFENDER 90 Standard Height Comfort Kit After many years and thousands of pounds worth of development, Alive Tuning's comfort springs take away the harshness felt from imperfections of the road surface, providing a smooth ride and also improving the handling of the vehicle greatly, especially with our Uprated Rear Anti Roll bar and Bilstein B6 or Fox 2.0 dampers.

This clock surround set offers an instant upgrade, with aesthetic rounded outer edge and angled center, these catch the light and show the contrast of the highlighted silver on a black background. These give a quality appearance to the interior.

This clock surround set offers an instant upgrade, with aesthetic rounded outer edge and angled center, these catch the light and show the contrast of the highlighted silver on a black background. These give a quality appearance to the interior.

DEFENDER TD5 DE-CAT PIPE This De-cat pipe for TD5 Defenders will make the vehicle breathe better and also stop excessive heat from the cat coming into the vehicle.

Defender Warning Light Panel Surround - Td5 Designed and developed for fitment around the warning light cluster, it is held in place by self adhesive to the dash binnacle. The component is machined from billet aluminium and has chamfered inner edges and rounded outer edges.

Discovery 2 Auxiliary Transmission Cooler Fits all Discovery 2 Models.

The factory Tie Down point on a Discovery 2 is NOT a recovery point. Thats why at Davis Performance we turned the Factory Tie Down Point into a Heavy Duty Recovery Point. We take a factory Tie Down Point, shape & weld solid steel onto The Tie Down Point. A block of solid steel is also fitted to...

Discovery 3 Auxiliary Transmission Cooler Fits all Discovery 3 Models.

Discovery 4 Auxiliary Transmission Cooler Fits all Discovery 4 Models.

EGR Blanking Plate with bolt cutouts so you can fit in while engine is in vehicle by just loosening the EGR bolts to slide in. !!!IMPORTANT!!! You will need the ECU modded also so the EGR no longer operates and so the check engine lights does not come on the dash.

2 x EGR Blanking Plates with bolt cutouts so you can fit in while engine is in vehicle by just loosening the EGR bolts to slide in. !!!IMPORTANT!!! You will need the ECU modded also so the EGR no longer operates and so the check engine lights does not come on the dash.

GENUINE STYLE FOLD-DOWN SIDE STEPS FOR LAND ROVER DEFENDER - CAN BE FITTED TO FRONT OR REAR SIDE DOORS Folding Side Step  for  Land Rover   Defender This part is top quality aftermarket  folding   side step This fold up step is for the  right  or  left  side of the vehicle ( front  or  rear  door) - it will  not suit the rear taildoor Suits  Land Rover   Defender

The Front vented disc kit is designed  to convert your non-vented disc vehicle to a vented disc vehicle.  This improves braking by allowing lower braking temperatures by dissipating heat. Vented rotors are a better option than traditional solid rotors . They dissipate heat better and don't warp or fade as much as solid rotors. They are also good for towing heavy loads.

GTB450 Td5 VNT Turbo Kit - Defender Td5 The result of six years development and testing in the harshest of environments, the GTB450 is the direct fit VNT turbo for the Td5 that works as a VNT turbo should!

GTB450 VNT Turbo Kit - Discovery Td5 The result of six years development and testing in the harshest of environments, the GTB450 is the direct fit VNT turbo for the Discovery Td5 that works as a VNT turbo should!

GTB550 Td5 VNT Turbo Kit - Defender Td5 Like our smaller GTB450, the result of six years development and testing in the harshest of environments, the GTB550 is the direct fit VNT turbo for the Td5 that not only works as a VNT turbo should, but has the capability to unleash massive power and torque!

GTB550 VNT Turbo Kit - Discovery Td5 Like our smaller GTB450, the result of six years development and testing in the harshest of environments, the GTB550 is the direct fit VNT turbo for the Td5 that not only works as a VNT turbo should, but has the capability to unleash massive power and torque!

Defender Heater Vents Sold as a pair. For models after 1989 chassis number FA453192

Heavy Duty Rear Axle Kit - Defender (1999 - 2015) Kit includes two brand new aftermarket axles| new heavy duty drive flanges| flange gaskets| hub seals| lock washers and lock nuts to convert the rear bearings to an adjustable setup.

Consists of:1 x Front Runner Drawer unit (SSDR002)1 x Land Rover All-New Discovery Deck Completion Set2 x Push to Close latch with 2 keys per lock3 x Accessory Channels6 x Eye Nuts for Accessory Channel1 x T Wrench with 1 custom sockets for wheel winderInstallation Hardware including 4 turnbuckles to secure unit to vehicleFitting InstructionMaterials used:Aluminum - Accessory Channels Sub FrameBlack powder coated steel - Drawer Bins FrameCarpet Laminated plywood - Top Deck Deck SetProduct Dimensions:Overall Dimensions:974mm (38.3'') L x 1324mm (52.1'') W x 330mm (13'') HInterior Drawer Dimensions:Left Hand Drawer:914mm (36'') L x 461mm (18.2'') W x 208mm (8.2'') HRight Hand Drawer:914mm (36'') L x 373mm (14.7'') W x 208mm (8.2'') HWeight:82.4kg (181.7lbs)Load Rating:113Kg (250lbs) per DrawerSpecial Notes:Supplied with a T-wrench and custom socket for operating the wheel winder through the drawer system.

Consists of:2x Large light protectors4x Small light protectors12x Self tapping screwsMaterials used:Black plastic-coated high strength steel

Consists of:2x Large light protectors4x Small light protectors12x Self tapping screwsMaterials used:Black plastic-coated high strength steel

Consists of:1xAluminium gullwing door assembly1x Outer frame1x Fastening kit2x Gas struts1x Right side inner bracket1x Left side inner bracket1x Top inner bracket1x Bottom inner bracketMaterials used:Black powder-coated 3mm aluminiumBlack powder-coated 2mm mild steel reinforcement plateBlack powder-coated high strength steelProduct Dimensions:Overall: L 1120mm (44.1) x W 50mm (2) x H 490mm (19.3)Door Panel: L 1044mm (41.1) x H 414mm (16.3)Weight:15.5kg (34.2lbs)

Consists of:1x Glass gullwing door assembly1x Outer frame1x Fastening kit2x Gas struts1x Right side inner bracket1x Left sideinner bracket1x Top inner bracket1x Bottom inner bracketMaterials used:6mm Toughened glass with tinted laminateBlack powder-coated high strength steelProduct Dimensions:Overall: L 1120mm (44.1) x W 50mm (2) x H 490mm (19.3)Door Panel: L 1044mm (41.1) x H 414mm (16.3)Weight:15kg (33.1lbs) Glass specifications: Visible Light:Transmission: 44Reflection Outside: 5 Solar Energy:Total Elimination: 38Reflection Outside: 5Absorption 1: 47Direct Transmission: 47SHGC: 0.62 Shading Coefficient:Ratio: 0.71 U Value:(W/m2).K (Center of Glass): 5.8

N/D

Consists of:1x Under console safe2x Keys supplied Materials used:Black powder-coated mild steelCarpeted base Product Dimensions:433mm (17.1'') L x 275mm (10.8'') W x H 100mm (3.9'') Internal Dimensions:375mm (14.8'') L x 265mm W (10.4'') (Raised section)/205mm (8.1'') W (Lower Section) x 107mm (4.2'') H Weight:3.2kg (7.1lbs)

Consists of: 2x Large light protectors4x Small light protectors12x Self tapping screwsMaterials used:Black plastic-coated high strength steelWeight:1.1kg (2.4lbs)

Consists of: 2x Large light protectors4x Small light protectors12x Self tapping screwsMaterials used:Black plastic-coated high strength steelWeight:1.1kg (2.4lbs)