RACK ACCESSORIES

A durable and versatile way to mount your solar panel kit to your Front Runner Roof Rack. Made from high-strength steel and coated with a durable finish, these four brackets are compatible with all Front Runner Roof Racks and allow you to configure the placement of your Zamp Obsedian solar panels either perpendicular or parallel, depending on your needs.

Consists of:1 x Pair of Wolf Pack Rack BracketsInstallation HardwareFitting Instructions Materials used:Black powder coated steel Product Dimensions:63mm (2.5'') L x 51.5mm (2'') W x 233mm (9.2'') H (Single Bracket) Weight:0.52Kg (1.1lbs)

Consists of:1 x Pair of Wolf Pack Pro BracketsInstallation HardwareFitting Instructions Materials used:Black powder coated steel Product Dimensions:40mm (1.6'') L x 78.5mm (3.1'') W x 222mm (8.7'') H (Single Bracket) Weight:0.55kg (1.2lbs)

Consists of:1 x Wolf Pack Pro Mounting BracketsFitting Instructions Materials used:Black powder coated steel Product Dimensions:101mm (4'') L x 309mm (12.2'') W x 255mm (10'') H (Per Bracket) Weight:1.65kg (3.6lbs)

Consists of:2 x Mounting Brackets2 x LatchesHardware KitFitting Instructions Materials used:Black powder coated high strength steel Product Dimensions:289mm (11.4'') L x 486mm (19.1'') (W) x 492mm (19.4'') H Weight:3.66kg (8.07lbs)

Consists of:1 x Wind Fairing4 x Brackets1 x Rubber Blade1 x Protective Vinyl StripInstallation HardwareFitting instructions Materials used:Black powder coated aluminumEPDM Rubber Product Dimensions:1180mm (46.5'') L x 2.5mm (0.1'') W x 167mm (6.6'') H Weight:1.9kg (4.2lbs)

Consists of:1 x Wind Fairing4 x Brackets1 x Rubber BladeInstallation HardwareFitting instructions Materials used:Black powder coated aluminumEPDM Rubber Product Dimensions:1262mm (49.7'') L x 2mm (0.1'') W x 127mm (5'') H Weight:1.6kg (3.5lbs)

Product Dimensions:70mm (2.8'') Diameter x 25mm (1'') HSpecial NotesSKU BO161

Consists of:4x BracketsNuts and bolts kitMaterials used:Black powder-coated mild steelWeight:1kg (2.2lbs)

Material used: Tank: BPA-free polyethylene Fittings: Plastic   Capacity: 67l (17.7gal)   Product Dimensions: L 950mm (37.4'') x H 260mm (10.2'') x W 300mm (11.8'')   Weight: 6.98kg (15.4lbs)Special NotesSKU CR1038-GY-COMP

Consists of:1 x Volkswagent T5/T6 Slimsport Rack Wind FairingInstallation HardwareFitting Instructions Materials used:Black powder coated steel Product Dimensions:1344mm (52.9'') L x 185mm (7.3'') W x 155mm (6.1'') H Weight:2.3kg (5.1lbs)

Consists of:1 x Rear Door ladderInstallation hardware kitFitting instructionMaterials used:Black powder coated high strength steelProduct Dimensions:354mm (13.9'') L x 242mm (9.5'') W x 1420mm (55.9'') HWeight:5.7kg (12.6lbs)

Consists of:1x Volkswagen T5/T6 Transporter LadderInstallation Hardware Fitting Instructions Materials used:Black powder coated aluminium steelProduct Dimensions:400mm (15.7'') L x 262mm (10.3'') W x 1448mm (57'') HWeight:5.64kg (12.4lbs)

KVVC006T - Volkswagen Crafter (L5H2/ LWB Maxi/OEM Track) (2017-Current) Slimpro Van Rack Kit Consisting of: 7x FAVF005 - Volkswagen Crafter Van Rack Foot Set / 65mm2x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps4x RRAC940 - Merc Bens Sprinter Slimpro Van Track T-Bolt Kit6x RRNS1345 - Narrow Slat / 1345mm (Pair)1x SPVT002 - Van Rack Side Profile / 1358mm2x SPVT003 - Van Rack Side Profile / 1560mm1x WDST013 - Wind Deflector Van Rack 30mm LipMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Assembled Rack Dimensions:4535mm (178.5'') L x 1455mm (57.3'') W x 132mm (5.2'') H Approximate Installed Weight: 45.98kg (101.37lbs) Volkswagen Crafter Van Rack Kit heights are adjustable from 116mm (Z bracket inverted) to 158mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat. The slat T slots and side profiles take standard M8 hex bolts top and bottom. Shipping Dimensions:Width: 445mm (18'')Length: 1720mm (68'')Height: 160mm (6'')Shipping Weight:Weight: 53kg (117lbs)

Consists of:1 x Set of 6 Foam Pads Materials used:Cross Linked Closed Cell Polyethylene foam Product Dimensions:157mm (6.2'') L x 44mm (1.7'') W x 20mm (0.8'') H Weight: (per set)0.12kg (0.3lbs)

Consists of:2 x Board Mounting Brackets2 x Slimline II Rack Latch Brackets1 x Pair of Stratchits1 x Pair of Tie Down RingsInstallation HardwareFitting InstructionsMaterials used:Black powder coated high strength steel304 Stainless SteelFoam PadRubberProduct Dimensions:Outer Dimensions (Single Holder):559mm (22'') L x 85.5mm (3.4'') W x 98.5mm (3.9'') HOpen Dimensions (Single Holder):161mm (6.3'') L x 85.5mm (3.4'') W x 445mm (17.5'') HWeight:3.4kg (7.5lbs)

Consists Of:Spare vertical jerry can holder strap with stainless steel latchFitting instructions Materials used:Actual product High strength steel Stainless steelPowder coat Product Dimensions:395mm (15.6'') L x 40mm (1.6'') W x 72mm (2.8'') H Weight:600g (1.3lbs)

Consists of:1 x Vertical Jerry Can HolderInstallation HardwareFitting InstructionsMaterials used:Black powder coated high strength steelProduct Dimensions:200mm (7.9'') L x 395mm (15.6'') W x 475mm (18.7'') HWeight:4.6kg (10.1lbs)

Material used: Cast brass with chrome-plated protective coatingWeight: 0.32kg (0.7lbs)

Consists of:1 x Universal Vehicle Ladder / MediumInstallation HardwareFitting Instructions Materials used:Black Powder coated steel and aluminium Product Dimensions:Overall Ladder Length:Min 1485mm / 58.4''Max 1786mm / 70.3''Width 340mm / 13.4'' Mounting hole centers:Min 1022mm / 40.2''Max 1738mm / 68.4'' Mounting surface required:Min 1060mm / 41.7''Max 1780mm / 70'' Weight:7.87Kg (17.4lbs)

TRAC003 - Universal Track / 1800mm(L) - by Front Runner Consisting of:1 x TRAC003 - Universal Track / 1800mm(L) - by Front Runner Material used:Black epoxy powder-coated T6 aluminiumApproximate Installed Weight 3kg (8lbs)Shipping Dimensions:Width110mm (4)Length1880mm (74)Height 110mm (4)Shipping Weight:Weight4.0kg (8.9lbs)