RACKS

RRSAD1255 - 1255mm Slat Add-On Kit Consisting of: 1 x RRAC045 - Additional Tray Slat Bolts 1 x RRSS1255 - Standard Slat- 1255mm Wide Rack Approximate Installed Weight 2kg (4lbs)   Shipping Dimensions: Width 110mm (4'')Length 1260mm (50'')Height 70mm (3'')   Shipping Weight: Weight 2.2kg (4.8lbs)

RRSAG1345 - 1345mm Slat Add-On Kit Consisting of: 1 x RRAC045 - Additional Tray Slat Bolts 1 x RRSS1345 - Standard Slat- 1345mm Wide Rack Approximate Installed Weight 2kg (4lbs)   Shipping Dimensions: Width 110mm (4'')Length 1350mm (53'')Height 70mm (3'')   Shipping Weight: Weight 2.3kg (5.0lbs)

RRSAJ1425 - 1425mm Slat Add-On Kit Consisting of: 1 x RRAC045 - Additional Tray Slat Bolts 1 x RRSS1425 - Standard Slat- 1425mm Wide Rack Approximate Installed Weight 2kg (4lbs)   Shipping Dimensions: Width 110mm (4'')Length 1430mm (56'')Height 70mm (3'')   Shipping Weight: Weight 2.4kg (5.2lbs)

RRSAM1475 - 1475mm Slat Add-On Kit Consisting of: 1 x RRAC045 - Additional Tray Slat Bolts 1 x RRSS1475 - Standard Slat- 1475mm Wide Rack Approximate Installed Weight 2kg (5lbs)   Shipping Dimensions: Width 110mm (4'')Length 1480mm (58'')Height 70mm (3'')   Shipping Weight: Weight 2.4kg (5.3lbs)

RRSS1575 - 1575mm Slat - by Front Runner Consisting of: Material Used: Black epoxy powder - coated T6 aluminium Approximate Installed Weight: 1.95kg (4.3lbs) Shipping Dimensions: Width: 90mm (4'') Length: 1570mm (62'') Height: 23mm (1'') Shipping Weight: Weight: 1.95kg (4lbs)

Consists of:1x Jerry can with air-tight cap Materials used:Black painted steel Product Dimensions:350mm (13.8'') L x 165mm (6.5'') W x 460mm (18.1'') H Weight:3.82kg (8.42lbs)Special Notes SKU 20LJCB

Consists of:1 x Drawer unitFitting InstructionsMaterials used:Black powder coated mild steel - Drawer unitProduct Dimensions:906mm (35.7'') L x 696mm (27.4'') W x 262mm (10.3'') HInterior Drawer Dimensions:882mm (34.7'') L x 646mm (25.4'') W x 45mm (1.8'') HWeight:38.44kg (84.7lbs)Special Notes:The drawer has a rotating latch to secure the drawer in place.

Consists of:1 x Drawer unitFitting InstructionsMaterials used:Black powder coated mild steel - Drawer FrameNylon Carpet Laminated Plywood - Top DeckProduct Dimensions:653mm (25.7) L x 940mm (37) W x 261mm (10.3) HInterior Drawer Dimensions:Full Size:629mm (24.8) L x 890mm (35) W x 45mm (1.8) H(NOTE: This unit has a 20mm (0.8) H rib down the middle)2 Equally Sized Sections (Left Right Hand Side):629mm (24.8) L x 440mm (17.3) W x 45mm (1.8) HWeight:36.8kg (81.1lbs)Load Rating:113kg (250lbs)Special Notes:The drawer has a rotating latch to secure drawer in place.

Consists of:1 x Drawer unitFitting instructionsMaterials used:Black powder coated mild steel - Drawer unitNylon Carpet Laminated Plywood - Top DeckProduct Dimensions:944mm (37.2) L x 935mm (36.8) W x 618mm (24.3) HInterior Drawer Dimensions:Left Hand Top Drawer:877mm (34.5) L x 317mm (12.5) W x 46mm (1.8) HLeft Hand Bottom Drawer (with Storage Tray):828mm (32.6) L x 258mm (10.2) W x 149mm (5.9) HFridge Slide:882mm (34.7) L x 519mm (20.4) W x 37mm (1.5) HWeight:96.16kg (212lbs)Load Rating:113kg (250lbs) per drawer and fridge slide150kg (331lbs) Distributed over the Top DeckSpecial Notes:The Drawer system has 3 different sized storage compartments all with rotating latches to secure drawers in place.

Consists of:1 x Storage Unit2 x Top DecksInstallation Hardware Fitting Instructions Materials used:Black powder-coated aluminium and steel Product Dimensions:971mm (38.2'') L x 971mm (38.2'') W x 310mm (12.2'') H Weight:36kg (79.4lbs) Special Note:80kg (176.4lbs) top deck load capacity

Consists of:1 x Lightbar1 x Set of Front Mount Brackets (1 Left Hand side 1 Right Hand side)1 x Set of Underneath Mount Brackets (1 Left Hand side 1 Right Hand side)1 x Front CoverInstallation HardwareFitting Instructions Materials used:Black powder coated steel and aluminium mounting brackets Product Dimensions:Light Bar:1031mm (40.6'') L x 67mm (2.6'') D x 35mm (1.4'') H Light Bar with Bracket:1070mm (42.1'') L x 102mm (4'') W x 58mm (2.3'') H Weight:5.56kg (12.3lbs) Special Notes:Product type: On-road and off-roadSKU: VX1000-CB SMLED supplier: OSRAMLumens: 600012/24VColor temperature: 5700 KLifespan Tc: 5000 hGuarantee: 5 yearsDouble ECE-Certification: 2x R112Reference Number: (37,5 + 37,5)

Consists of:1 x 4'' 27W Square LED Work Light1 x Mounting Bracket Set Materials used:Aluminum housingPMMA polycarbonateStainless steel mounting brackets Product Dimensions:128mm (5'') L x 110mm (4.3'') W x 55mm (2.2'') H Weight:0.9kg (2lbs) Special Note:Operating Temperature: -40°C - +60°CIP Rating: IP67Protections: Reverse PolarityInput Voltage: 9-32V DCPower Consumption: 3W*9PCSLuminous Flux: 1620lmCurrent Draw: 2.1A@12V, 1.1A@24VColor Temperature: 6000KBeam Pattern: Flood BeamBeam Angle: 60deg

Consists of:1 x Drawer unitFitting InstructionsMaterials used:Black powder coated mild steel - FrameNylon Carpet Laminated Plywood -Top DrawerBaseProduct Dimensions:969mm (38.1) L x 940mm (37) W x 350mm (13.8) HInterior Drawer Dimensions:Full Size:944mm (37.2) L x 890mm (35) W x 45mm (1.8) H(NOTE: This unit has a 20mm (0.8) H rib down the middle)2 Equally Sized Bottom Drawer Sections:944mm (37.2) L x 440mm (17.3) W x 45mm (1.8) HTop Drawer:948mm (37.3) L x 893mm (35.2) W x 71mm (2.8) HWeight:68.04kg (150lbs)Load Rating:113kg (250lbs) Interior Drawers113kg (250lbs) Top DrawerSpecial Notes:The drawer unit has rotating latches to secure both the top and bottom drawers in place.

Consists of:1 x Drawer unit with 1 Opening Drawer1 x Push to close latch with 2 keys3 x Accessory Channels6 x Tie Down Rings6 x Cub PacksInstallation HardwareFitting InstructionMaterials used:Black powder coated steel - FrameCarpet Laminated Plywood - Top DeckProduct Dimensions:Overall Dimensions:1000mm (39.4) L x 950mm (37.4) W x 285mm (11.2) HOpen Drawer Dimensions:1915mm (75.4) L x 950mm (37.4) W x 285mm (11.2) HInner Drawer Dimensions:946mm (37.2) L x 890mm (35) W x 222mm (8.7) HWeight:64.3kg (141.8lbs)Load Rating:113kg (250lbs)Special Notes:Items can be secured to the top deck using the 6 supplied tie down rings and fitting them accordingly to the 3 accessory channels on the top deck.Drawer has a hold open feature.

Consists of:1 x Drawer unit with 1 Opening Drawer1 x Push to close latch with 2 keys3 x Accessory Channels6 x Tie Down Rings6 x Low Lid Wolf PacksInstallation HardwareFitting InstructionMaterials used:Aluminum - Accessory Channels Sub FrameBlack powder coated steel - FrameCarpet Laminated plywood - Top DeckProduct Dimensions:Overall Dimensions:1252mm (49.3) L x 1083mm (42.6) W x 310mm (12.2) HDrawer Inner Dimensions:1197mm (47.1) L x 1031mm (40.6) W x 230mm (9.1) HDrawer Unit Open Dimensions:2163mm (85.2) L x 1083mm (42.6) W x 310mm (12.2) HWeight:67Kg (147.7lbs)Load Rating:113Kg (250lbs)Special Notes:Items can be secured to the top deck using the 6 supplied tie rings and fitting them accordingly to the 3 accessory channels on the top deck.Drawer has a hold open feature.

Consists of:1 x Drawer unit with 1 Opening Drawer1 x Push to close latch with 2 keys3 x Accessory Channels6 x Tie Down Rings6 x Low Lid Wolf Pack ProsInstallation HardwareFitting Instruction Materials used:Aluminum - Accessory Channels Sub FrameBlack powder coated steel - FrameCarpet Laminated plywood - Top Deck Product Dimensions:Overall Dimensions:1252mm (49.3'') L x 1083mm (42.6'') W x 310mm (12.2'') H Drawer Inner Dimensions:1197mm (47.1'') L x 1031mm (40.6'') W x 230mm (9.1'') H Drawer Unit Open Dimensions:2163mm (85.2'') L x 1083mm (42.6'') W x 310mm (12.2'') H Weight:67Kg (147.7lbs) Load Rating:113Kg (250lbs) Special Notes:Items can be secured to the top deck using the 6 supplied tie rings and fitting them accordingly to the 3 accessory channels on the top deck.Drawer has a hold open feature.

Consists of: 2x M8x25 Button Heads

KRAA001T - Audi A4 Allroad (2009-2016) Slimline II Roof Rail Rack Kit - by Front Runner Consisting of: 2x GOFR001 - Grab on Flush Rail Feet2x GOFR014 - Flush Rail Outer Grips / No. 62x GOFR035 - Flush Rail Inner Grips / F1x RRSTA07 - SLII Tray - 1165mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 23.02kg (50.75lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Weight: 445mm (18'')Length: 1730mm (68'')Height: 150mm (6'')Shipping Weight:Weight: 24kg (53lbs)

KRAA002T - Audi A6 (2019-Current) Slimline II Roof Rail Rack Kit - by Front Runner Consisting of: 2x GOFR001 - Rail Foot Base (Pair)2x GOFR014 - Flush Rail Outer Grips / No. 62x GOFR035 - Flush Rail Inner Grips / F1x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair)1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)1x WDST010 - Wind Deflector 20mm Lip Narrow Pair /1255mm(W) Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 25.27kg (55.71lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17'') Length: 1730mm (68'') Height: 170mm (7'') Shipping Weight: Weight: 30kg (66lbs)

KRAE001T - Audi E-TRON (2020-Current) Slimline II Roof Rail Rack Kit - by Front Runner Consisting of: 2x GOFR001 - Rail Foot Base (Pair)2x GOFR014 - Flush Rail Outer Grips / No. 62x GOFR036 - Flush Rail Inner Grips / G1x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair)1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)1x WDST010 - Wind Deflector 20mm Lip Narrow Pair /1255mm(W) Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 25.26kg (55.69lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17'') Length: 1730mm (68'') Height: 170mm (7'') Shipping Weight: Weight: 29kg (64lbs)

KRAQ001T - Audi Q3 (2011-Current) Slimline II Roof Rail Rack Kit - by Front Runner Consisting of: 2x GOFR001 - Rail Foot Base (Pair)2x GOFR014 - Flush Rail Outer Grips / No. 62x GOFR031 - Flush Rail Inner Grips / B1x RRSTD06 - SLII Tray - 1255mm(W)X1156mm(L)1x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair /1165mm Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 44.25kg (97.55lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18'') Length: 1615mm (64'') Height: 140mm (6'') Shipping Weight: Weight: 20.57kg (45lbs)

KRAQ002T - Audi Q5 (2009-Current) Slimline II Roof Rail Rack Kit - by Front Runner Consisting of: 2x GOFR001 - Rail Foot Base (Pair)2x GOFR014 - Flush Rail Outer Grips / No. 62x GOFR031 - Flush Rail Inner Grips / B1x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair)1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)1x WDST010 - Wind Deflector 20mm Lip Narrow Pair /1255mm(W) Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 25.35kg (55.89lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18'') Length: 1730mm (68'') Height: 140mm (6'') Shipping Weight: Weight: 26.46kg (58lbs)

KRAQ004T - Audi Q7 (2010-2015) Slimline II Roof Rack Kit - by Front Runner Consisting of: 2 x GOFR001 - Rail Foot Base (Pair) - by Front Runner 2 x GOFR014 - Flush Rail Outer Grips / No. 6 - by Front Runner 2 x GOFR031 - Flush Rail Inner Grips / B - by Front Runner 1 x RRSTD07 - Slimline II Tray - 1255mm(W) X 1358mm(L) - by Front Runner 1 x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair / 1165mm(W) - by Front Runner   Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight 22kg (49lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.   Shipping Dimensions: Width 450mm (18'')Length 1615mm (64'')Height 140mm (6'')   Shipping Weight: Weight 25.7kg (56.5lbs)

KRAQ003T - Audi Q7 (4L) (2005-2010) Slimline II Roof Rail Rack Kit - by Front RunnerConsisting of: 3x GOFR001 - Rail Foot Base (Pair)3x GOFR014 - Flush Rail Outer Grips / No. 63x GOFR031 - Flush Rail Inner Grips / B1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)1x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair /1165mmMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 55kg (121.25lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 450mm (18'')Length: 1615mm (64'')Height: 140mm (6'')Shipping Weight:Weight: 27.69kg (61lbs)

KRAQ005T - Audi Q8 (2020-Current) Slimline II Roof Rail Rack Kit - by Front RunnerConsisting of: 2x GOFR001 - Rail Foot Base (Pair)2x GOFR014 - Flush Rail Outer Grips / No. 62x GOFR031 - Flush Rail Inner Grips / B1x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair)1x RRSTD06 - SLII Tray - 1255mm(W)X1156mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 22.67kg (49.98lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17'')Length: 1730mm (68'')Height: 180mm (7'')Shipping Weight:Weight: 27kg (59lbs)

Consists of:1 x Set of Nut PlatesFitting Instructions Materials used:Black powder coated steel Product Dimensions:90mm (3.5'') H x 28.5mm (01.1'') W x 5mm (0.2'') H (Single Nut Plate) Weight:0.38kg (0.84lbs)

Consists of: Axe bracket, aluminum bush, rubber insert handle bracket, M10 eye nut and bolt kit Product Dimensions: L 340mm (13.38) x W 160mm (6.29) x H 85mm (3.34) Weight: 1.8kg (3.96lbs)

Consists of: Axe bracket, aluminum bush, rubber insert handle bracket, M10 eye nut and bolt kit Product Dimensions: L 340mm (13.38) x W 160mm (6.29) x H 85mm (3.34) Weight: 1.8kg (3.96lbs)

Consists of:1 x 150ml Spray canMaterials used:Black Powder Coat Touch Up Paint with propellantProduct Dimensions:140mm (5.5'') H x 52mm (2.1'') DiameterWeight:200g (7.1oz)

Consists of: M8 Eye Nut x 2 M8 Nylon Washer x 2 M8 Hex Bolt x 2   Materials used: Made from galvanized steel supplied with bolt plastic washer   Product Dimensions: 90mm (3.54'') L x 40mm (1.57'') W x 20mm (0.78'') H   Weight: 0.12kg (0.26lbs)

Material used:Mild steelConsists of:2x Ring bolts2x M8 RivnutsWeight:0.12kg (0.26lbs)

KRBF001T - BMW F31 (320d) (2012-2018) Slimline II Roof Rail Rack Kit - by Front Runner Consisting of: 2x GOFR001 - Rail Foot Base (Pair)2x GOFR015 - Flush Rail Outer Grips / No. 72x GOFR036 - Flush Rail Inner Grips / G1x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair)1x RRSTA07 - SLII Tray - 1165mm(W)X1358mm(L) Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 23.66kg (52.16lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17'') Length: 1730mm (68'') Height: 175mm (7'') Shipping Weight: Weight: 26kg (57lbs)

KRBX004T - BMW X1 (2015-2022) Slimline II Roof Rail Rack Kit - by Front RunnerConsisting of: 2x GOFR001 - Rail Foot Base (Pair)2x GOFR015 - Flush Rail Outer Grips / No. 72x GOFR036 - Flush Rail Inner Grips / G1x RRAC928 - Plastic Spacer for Rail Foot Base / 6mm (Pair)1x RRSTA06 - SLII Tray - 1165mm(W)X1156mm(L)1x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair /1165mmMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 22.66kg (49.96lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17'')Length: 1730mm (68'')Height: 160mm (6'')Shipping Weight:Weight: 22.6kg (50lbs)

KRBX001T - BMW X3 (2003-2010) Slimline II Roof Rail Rack Kit Consisting of: 2x GOFR001 - Rail Foot Base (Pair)2x GORR051 - Raised Rail Outer Grips / No. 22x GORR070 - Raised Rail Inner Grips / A1x RRSTA08 - SLII Tray - 1165mm(W)X1560mm(L)1x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair /1165mm Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 23.59kg (52.01lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 455mm (18'') Length: 1730mm (68'') Height: 285mm (11'') Shipping Weight: Weight: 26.22kg (58lbs)

KRBX003T - BMW X3 (2013-Current) Slimline II Roof Rail Rack Kit - by Front Runner Consisting of: 2 x GOFR001 - Rail Foot Base (Pair) - by Front Runner2 x GOFR015 - Flush Rail Outer Grips / No. 7 - by Front Runner2 x GOFR036 - Flush Rail Inner Grips / G - by Front Runner1 x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair)1 x RRSTD06 - Slimline II Tray - 1255mm(W) X 1156mm(L) - by Front Runner   Material used: Black epoxy powder-coated T6 aluminiumHigh strength steel Approximate Installed Weight 21kg (45lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.   Shipping Dimensions: Width 455mm (18'')Length 1610mm (63'')Height 215mm (8'')   Shipping Weight: Weight 23.9kg (52.5lbs)

KRBX002T - BMW X5 (2000-2013) Slimline II Roof Rail Rack Kit - by Front Runner Consisting of: 2x GOFR001 - Rail Foot Base (Pair)2x GORR050 - Raised Rail Outer Grips / No. 12x GORR070 - Raised Rail Inner Grips / A1x RRSTA08 - SLII Tray - 1165mm(W)X1560mm(L)1x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair /1165mm Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 25.36kg (55.91lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 455mm (18'') Length: 1730mm (68'') Height: 285mm (11'') Shipping Weight: Weight: 26.22kg (58lbs)

KRBX005T - BMW X5 (2019-Current) Slimline II Roof Rail Rack KitConsisting of: 3x GOFR001 - Rail Foot Base (Pair)3x GOFR015 - Flush Rail Outer Grips / No. 73x GOFR036 - Flush Rail Inner Grips / G3x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair)1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)1x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair /1165mmMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 24.05kg (53.02lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18'')Length: 1720mm (68'')Height: 160mm (6'')Shipping Weight:Weight: 28kg (62lbs)

KRBE001T - Buick Encore (2013-Curr) Slimline II Roof Rack Kit Consisting of:2 x GOFR001 - Rail Foot Base (Pair) - by Front Runner 2 x GOFR014 - Flush Rail Grab-On Outer Grips / No. 6 - by Front Runner 2 x GOFR035 - Flush Rail Grab-On Inner Grips / F - by Front Runner 1 x RRSTA07 - Slimline II Tray - 1165mm(W) X 1358mm(L) - by Front Runner Material used:Black epoxy powder-coated T6 aluminium High strength steelApproximate Installed Weight 21kg (46lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2) to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width450mm (18)Length1615mm (64)Height 140mm (6)Shipping Weight:Weight24.3kg (53.5lbs)

Consists of:1 x Cargo Slide/Fridge Slide Installation HardwareFitting Instructions Materials used:Black powder coated steel Product Dimensions:Overall Dimensions732mm (28.8'') L x 468mm (18.4'') W x 88mm (3.5'') H Closed Dimensions:732mm (28.8'') L x 468mm (18.4'') W x 88mm (3.5'') H Opened Dimensions:1332mm (52.4'') L x 468mm (18.4'') W x 88mm (3.5'') H Weight:14.23kg (31.4lbs) Load Rating:90kg (198lbs)

Consists of:1 x Fridge SlideInstallation HardwareFitting Instructions Materials used:Black powder-coated steel Product Dimensions:Overall Dimensions757mm (28.8'') L x 540mm (18.4'') W x 88mm (3.5'') H Closed Dimensions:757mm (28.8'') L x 540mm (18.4'') W x 88mm (3.5'') H Opened Dimensions:1457mm (52.4'') L x 540mm (18.4'') W x 88mm (3.5'') H Weight:18.34kg (40.4lbs) Load Rating:90kg (198lbs)

Consists of:1 x Fridge SlideInstallation HardwareFitting Instructions Materials used:Black powder-coated steel Product Dimensions:Overall Dimensions:1002mm (39.4'') L x 591mm (23.3'') W x 88mm (3.5'') H Closed Dimensions:1002mm (39.4'') L x 591mm (23.3'') W x 88mm (3.5'') H Opened Dimensions:1902mm (74.9'') L x 591mm (23.3'') W x 88mm (3.5'') H Weight:24.96kg (55lbs) Load Rating:113kg (249lbs)

KRCT002T - Chery Tiggo 8 (2022-Current) Slimline II Roof Rail Rack Kit - by Front RunnerConsisting of: 2x GOFR014 - Flush Rail Outer Grips / No. 62x GOFR030 - Flush Rail Inner Grips / A3x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair)1x RRSTA07 - SLII Tray - 1165mm(W)X1358mm(L)1x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair /1165mmMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 22.67kg (49.98lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17'')Length: 1730mm (68'')Height: 160mm (6'')Shipping Weight:Weight: 24kg (53lbs)

KRCC007T - Chevrolet Captiva (2006-Current) Slimline II Roof Rail Rack Kit - by Front Runner Consisting of: 2 x GOFR001 - Rail Foot Base (Pair) - by Front Runner2 x GORR051 - Raised Rail Outer Grab-On / No. 2 - by Front Runner2 x GORR074 - Raised Rail Inner Grab-On / E - by Front Runner1 x RRSTA06 - Slimline II Tray - 1165mm(W) X 1156mm(L) - by Front Runner1 x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair / 1165mm(W) - by Front Runner Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 21.8kg (48.1lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot, Grab-on Foot or Strap-On Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 455mm (18.0'')Length: 1610mm (63.0'')Height: 285mm (11.0'') Shipping Weight:22.8kg (50.0lbs)

KRCC005T - Chevrolet Colorado (2015-2022) Slimline II Roof Rack Kit - by Front Runner Consisting of: 1 x FACC001 - Chev Colorado/GMC Canyon (2015-Current) Foot Rails - by Front Runner 1 x RRSTD07 - Slimline II Tray - 1255mm(W) X 1358mm(L) - by Front Runner   Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight 25kg (56lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.   Shipping Dimensions: Width 450mm (18'')Length 1615mm (64'')Height 140mm (6'')   Shipping Weight: Weight 29.4kg (64.8lbs)

KRCC001T - Chevrolet Colorado Pickup (2004-Current) Slimline II Load Bed Rack Kit - by Front Runner Consisting of: 2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner 1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner 1 x TRBU001 - Pickup Load Bed Tracks / 1000mm(L) - by Front Runner   Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight 26kg (57lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot, Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.   Shipping Dimensions: Width 450mm (18'')Length 1615mm (64'')Height 140mm (6'')   Shipping Weight: Weight 30.1kg (66.1lbs)

Consists of:1 x Chevrolet Colorado/GMC Canyon Slimsport Rack 40'' Light Bar Wind FairingFitting InstructionsInstallation HardwareMaterials used:Black powder coated steelProduct Dimensions:1450mm (57.1'') L x 255mm (10'') W x 55mm (2.2'') HWeight:2.7kg (5.9lbs)

Consists of:1 x Slimsport Rack Wind FairingInstallation HardwareFitting Instructions Materials used:Black powder coated steel Product Dimensions:1175mm (46.3'') L x 176mm (6.9'') W x 187mm (7.4'') H Weight:2.9kg (6.4lbs)

KSCC002T - Chevrolet Colorado/GMC Canyon (2015-2022) Slimsport Roof Rack Kit   Consisting of: 1x KSCC001 - Chevrolet Colorado GMC Canyon(15-Curr) slmsprt Rac 1x RRAC261 - Chev Colorado GMC canyon(15-22)Slmsprt Rck Wnd Far 1x RRAC971 - Protection Strip   Material Used: Black epoxy powder - coated T6 aluminium High strength steel   Assembled Rack Kit Dimensions: 1405mm (55.3'') L x 1181mm (46.5'') W x 120mm (5'') H   Approximate Installed Weight: 21.05kg (46.41lbs)   The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.   To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4''-2.8'') to the highest point of your roof.   Shipping Dimensions: Width: 325mm (12.8'') Length: 1700mm (67'') Height: 220mm (8.7'')   Shipping Weight: Weight: 24kg (52.9lbs)

KSCC003T - Chevrolet Colorado/GMC Canyon (2015-2022) Slimsport Roof Rack Kit / Lightbar ReadyConsisting of:1x KSCC001 - Chevrolet Colorado GMC Canyon(15-Curr) slmsprt Rac1x RRAC262 - Chev Colorado GMC canyon(15-22)Slmsprt 40''lght wnd1x RRAC971 - Protection StripMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 20.39kg (44.95lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4''-2.8'') to the highest point of your roof.Shipping Dimensions:Width: 325mm (13'')Length: 1700mm (67'')Height: 230mm (9'')Shipping Weight:Weight: 24kg (53lbs)

KRCC003 - Chevrolet Colorado/GMC Canyon ReTrax XR 5'' (2015-Current) Double Load Bar Kit - by Front Runner Consisting of: 2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK016 - Roof Load Bar Pair 1425mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 6kg (13.23lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8'') to the height of the Foot, Grab-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8'') to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8'') to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6'')Length: 1500mm (59'')Height: 155mm (6'')Shipping Weight:Weight: 8kg (18lbs)

KRCC009T - Chevrolet Colorado/GMC Canyon 5'' Bed (2015-Current) ReTrax XR Slimline II Load Bed Rack Kit - by Front Runner Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L) Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 29.53kg (65.1lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 440mm (17'')Length: 1730mm (68'')Height: 240mm (9'') Shipping Weight:Weight: 30kg (66lbs)

KRCC001 - Chevrolet Colorado/GMC Canyon ReTrax XR 5'' (2015-Current) Triple Load Bar Kit - by Front Runner Consisting of: 3x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK020 - Roof Load Bar Set 1425mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 8kg (17.64lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8'') to the height of the Foot, Grab-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8'') to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8'') to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6'')Length: 1560mm (61'')Height: 230mm (9'')Shipping Weight:Weight: 12kg (26lbs)

KRCC004 - Chevrolet Colorado/GMC Canyon ReTrax XR 6'' (2015-Current) Double Load Bar Kit - by Front Runner Consisting of: 2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK016 - Roof Load Bar Pair 1425mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 6kg (13.23lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8'') to the height of the Foot, Grab-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8'') to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8'') to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6'')Length: 1500mm (59'')Height: 155mm (6'')Shipping Weight:Weight: 8kg (18lbs)

KRCC010T - Chevrolet Colorado/GMC Canyon ReTrax XR 6'' (2015-Current) Slimline II Load Bed Rack Kit - by Front Runner Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTJ09 - SLII Tray - 1425mm(W)X1762mm(L) Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 34.42kg (75.88lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 440mm (17'')Length: 1730mm (68'')Height: 240mm (9'') Shipping Weight:Weight: 34kg (75lbs)

KRCC002 - Chevrolet Colorado/GMC Canyon ReTrax XR 6'' (2015-Current) Triple Load Bar Kit - by Front Runner Consisting of: 3x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK020 - Roof Load Bar Set 1425mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 8kg (17.64lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8'') to the height of the Foot, Grab-On listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8'') to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8'') to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6'')Length: 1560mm (61'')Height: 230mm (9'')Shipping Weight:Weight: 12kg (26lbs)

KRCS016T - Chevrolet Silverado 3rd 4th Gen (2013-Current) Cab Over Camper Slimline II Rack Kit Consisting of: 1x FACS004 - Chev Silverado 3rd 4th gen Shorty foot rails1x RRSTJ04 - SLII Tray - 1425mm(W)X752mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 17.04kg (37.57lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18'')Length: 1720mm (68'')Height: 270mm (11'')Shipping Weight:Weight: 24kg (53lbs)

KRCS005T - Chevrolet Silverado Crew Cab (2007-Current) Slimline II Load Bed Rack Kit - by Front Runner Consisting of: 3 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x RRSTP09 - SLII Tray - 1575mm(W)X1762mm(L)1 x TRBU004 - Bakkie Load Bed Tracks / 1600mm(L) - by Front Runner Material Used:Black epoxy powder-coated T6 aluminiumHigh strength steel Approximate Installed Weight: 39.4kg (87.0lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 1730mm (68.0'')Length: 445mm (18.0'')Height: 290mm (11.0'') Shipping Weight:35.8kg (79.0lbs)

KRCS007 - Chevrolet Silverado Crew Cab (2007 - Current) Triple Load Bar Kit - by Front Runner Consisting of: 3 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x LBSK019 - Roof Load Bar Set 1575mm(W) - by Front Runner1 x TRBU004 - Bakkie Load Bed Tracks / 1600mm(L) - by Front Runner Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 16.6kg (36.7lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot, Grab-on Foot or Strap-On Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 130mm (5.0'')Length: 1605mm (63.0'')Height: 390mm (15.0'') Shipping Weight:16.6kg (37.0lbs)

KRCS006 - Chevrolet Silverado Crew Cab / Short Load Bed (2007 - Current) Triple Load Bar Kit - by Front Runner Consisting of: 3 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x LBSK019 - Roof Load Bar Set 1575mm(W) - by Front Runner1 x TRBU002 - Bakkie Load Bed Tracks / 1200mm(L) - by Front Runner Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 15.9kg (35.0lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot, Grab-on Foot or Strap-On Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 1685mm (66.0'')Length: 125mm (5.0'')Height: 385mm (15.0'') Shipping Weight:14.4kg (32.0lbs)

KRCS004T - Chevrolet Silverado Crew Cab / Short Load Bed (2007-Current) Slimline II Load Bed Rack Kit - by Front Runner Consisting of: 3 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x RRSTP08 - SLII Tray - 1575mm(W)X1560mm(L)1 x TRBU002 - Bakkie Load Bed Tracks / 1200mm(L) - by Front Runner Material Used:Black epoxy powder-coated T6 aluminiumHigh strength steel Approximate Installed Weight: 35.3kg (77.8lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 445mm (18.0'')Length: 1730mm (68.0'')Height: 290mm (11.0'') Shipping Weight:35.8kg (79.0lbs)

KRCS001T - Chevrolet Silverado Standard Pickup (1987-Current) Slimline II Load Bed Rack Kit - by Front Runner Consisting of: 2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner 1 x RRSTM07 - Slimline II Tray - 1475mm(W) X 1358mm(L) - by Front Runner 1 x TRBU001 - Pickup Load Bed Tracks / 1000mm(L) - by Front Runner   Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight 26kg (57lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot, Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.   Shipping Dimensions: Width 450mm (18'')Length 1615mm (64'')Height 140mm (6'')   Shipping Weight: Weight 30.3kg (66.7lbs)

KRCS012 - Chevrolet Silverado/GMC Sierra 1500/2500/3500 ReTrax XR (1988-Current) Double Load Bar Kit - by Front Runner Consisting of: 2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK018 - Roof Load Bar Pair 1575mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 6.8kg (14.99lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8'') to the height of the Foot, Grab-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8'') to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8'') to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6'')Length: 1690mm (67'')Height: 155mm (6'')Shipping Weight:Weight: 9kg (20lbs)

KRCS010 - Chevrolet Silverado/GMC Sierra 1500/2500/3500 ReTrax XR (1988-Current) Triple Load Bar Kit - by Front Runner Consisting of: 3x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK019 - Roof Load Bar Set 1575mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 9kg (19.84lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8'') to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8'') to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8'') to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6'')Length: 1690mm (67'')Height: 150mm (6'')Shipping Weight:Weight: 10kg (22lbs)

KRCS011T - Chevrolet Silverado/GMC Sierra 1500/2500/3500 Crew Cab (2014-2018) Slimline II Roof Rack Kit Consisting of:1x FACS002 - ChevSilverado/GMCSierra1500CCab(14-18)FootRails1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L) Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 26.42kg (58.25lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 440mm (17'')Length: 1730mm (68'')Height: 260mm (10'') Shipping Weight:Weight: 30kg (66lbs)

KRCS006T - Chevrolet Silverado/GMC Sierra 1500/2500/3500 5'9'' Bed (2007-Current) ReTrax XR Slimline II Load Bed Rack Kit - by Front Runner Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTP09 - SLII Tray - 1575mm(W)X1762mm(L) Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 35.43kg (78.11lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 440mm (17'')Length: 1730mm (68'')Height: 260mm (10'') Shipping Weight:Weight: 37kg (81lbs)

KRCS008 - Chevrolet Silverado/GMC Sierra 1500/2500/3500 ReTrax XR 59 (2007-Current) Triple Load Bar Kit - by Front Runner Consisting of: 3x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK019 - Roof Load Bar Set 1575mm(W) Material Used: Black epoxy powder - coated T6 aluminium Approximate Installed Weight: 9kg (19.84lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8'') to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8'') to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8'') to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 160mm (6'') Length: 1690mm (67'') Height: 150mm (6'') Shipping Weight: Weight: 10kg (22lbs)

KRCS013 - Chevrolet Silverado/GMC Sierra 1500/2500/3500 ReTrax XR 6'6'' (1988-Current) Double Load Bar Kit - by Front Runner Consisting of: 2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK018 - Roof Load Bar Pair 1575mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 6.8kg (14.99lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8'') to the height of the Foot, Grab-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8'') to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8'') to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6'')Length: 1690mm (67'')Height: 155mm (6'')Shipping Weight:Weight: 9kg (20lbs)

KRCS007T - Chevrolet Silverado/GMC Sierra 1500/2500/3500 6'6'' Bed (1988-Current) ReTrax XR Slimline II Load Bed Rack Kit - by Front Runner Consisting of:4x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTP10 - SLII Tray - 1575mm(W)X1964mm(L) Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 39.57kg (87.24lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 440mm (17'')Length: 1730mm (68'')Height: 260mm (10'') Shipping Weight:Weight: 41kg (90lbs)

KRCS009 - Chevrolet Silverado/GMC Sierra 1500/2500/3500 ReTrax XR 66 (1988-Current) Triple Load Bar Kit - by Front Runner Consisting of: 3x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK019 - Roof Load Bar Set 1575mm(W) Material Used: Black epoxy powder - coated T6 aluminium Approximate Installed Weight: 9kg (19.84lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8'') to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8'') to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8'') to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 160mm (6'') Length: 1690mm (67'') Height: 150mm (6'') Shipping Weight: Weight: 10kg (22lbs)

KRCS009T - Chevrolet Silverado/GMC Sierra 2500/3500 8'' Bed (2007-Current) ReTrax XR Slimline II Load Bed Rack Kit - by Front Runner Consisting of:4x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTP12 - SLII Tray - 1575mm(W)X2368mm(L) Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 44.17kg (97.38lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 440mm (17'')Length: 1730mm (68'')Height: 260mm (10'') Shipping Weight:Weight: 46kg (101lbs)

KRCS008T - Chevrolet Silverado/GMC Sierra 2500/3500 6'10'' Bed (2020-Current) ReTrax XR Slimline II Load Bed Rack Kit - by Front Runner Consisting of:4x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTP10 - SLII Tray - 1575mm(W)X1964mm(L) Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 39.57kg (87.24lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 440mm (17'')Length: 1730mm (68'')Height: 260mm (10'') Shipping Weight:Weight: 41kg (90lbs)

KRCS011 - Chevrolet Silverado/GMC Sierra 2500/3500 ReTrax XR 8 (2007-Current) Triple Load Bar Kit - by Front Runner Consisting of: 3x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK019 - Roof Load Bar Set 1575mm(W) Material Used: Black epoxy powder - coated T6 aluminium Approximate Installed Weight: 9kg (19.84lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8'') to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8'') to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8'') to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 160mm (6'') Length: 1690mm (67'') Height: 150mm (6'') Shipping Weight: Weight: 10kg (22lbs)

KRCC006T - Chevy Colorado Roll Top 5.1' (2015-Current) Slimline II Load Bed Rack Kit - by Front Runner Consisting of: 2x LASS028 - Pick-Up Roll Top Leg Mount1x RRAC939 - Pickup Load Bed Bolt Kit / 30mm1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L)1x TRBU002 - Pick-Up Load Bed Tracks / 1200mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 31.41kg (69.25lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 455mm (18'')Length: 1730mm (68'')Height: 270mm (11'')Shipping Weight:Weight: 34.63kg (76lbs)

KRCB001T - Citroën Berlingo (2019-Current) Slimline II Roof Rail Rack Kit - by Front RunnerConsisting of: 3x GOFR001 - Rail Foot Base (Pair)3x GORR054 - Raised Rail Outer Grips / No. 53x GORR070 - Raised Rail Inner Grips / A1x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair)1x RRSTD08 - SLII Tray - 1255mm(W)X1560mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 27.98kg (61.69lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18'')Length: 1720mm (68'')Height: 160mm (6'')Shipping Weight:Weight: 29kg (64lbs)

KRCC004T - Citroen C4 (2010-Curr) Slimline II Roof Rack Kit Consisting of:2 x GOFR001 - Rail Foot Base (Pair) - by Front Runner 2 x GOFR014 - Flush Rail Grab-On Outer Grips / No. 6 - by Front Runner 2 x GOFR034 - Flush Rail Grab-On Inner Grips / E - by Front Runner 1 x RRSTD05 - Slimline II Tray - 1255mm(W) X 954mm(L) - by Front Runner Material used:Black epoxy powder-coated T6 aluminium High strength steelApproximate Installed Weight 18kg (40lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2) to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width450mm (18)Length1615mm (64)Height 140mm (6)Shipping Weight:Weight21.1kg (46.3lbs)

KVCJ001T - Citroen Jumper (L1H1/118” WB/Low Roof) (2014-Current) Slimpro Van Rack Kit - by Front Runner Consisting of:3x FAVF002 - FPCR Foot Set - by Front Runner1x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps4x RRNS1475 - Narrow Slat / 1475mm (Pair)1x SPVT001 - Van Rack Side Profile / 1156mm1x SPVT002 - Van Rack Side Profile / 1358mm1x WDST013 - Wind Deflector Van Rack 30mm Lip Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Assembled Rack Kit Dimensions:2570mm (101.2'') L x 1565mm (61.6'') W x 127mm (5'') H Approximate Installed Weight: 30.99kg (68.32lbs) Citroen Jumper Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat. The slat T slots and side profiles take standard M8 hex bolts top and bottom. Shipping Dimensions:Width: 300mm (12'')Length: 1805mm (71'')Height: 195mm (8'')Shipping Weight:Weight: 35.35kg (78lbs)

KVCJ002T - Citroen Jumper (L2H1/136” WB/Low Roof) (2014-Current) Slimpro Van Rack Kit - by Front Runner Consisting of:3x FAVF002 - FPCR Foot Set - by Front Runner1x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps4x RRNS1475 - Narrow Slat / 1475mm (Pair)1x SPVT002 - Van Rack Side Profile / 1358mm1x SPVT003 - Van Rack Side Profile / 1560mm1x WDST013 - Wind Deflector Van Rack 30mm Lip Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelAssembled Rack Kit Dimensions:2974mm (117.1'') L x 1565mm (61.6'') W x 127mm (5'') HApproximate Installed Weight: 31.49kg (69.42lbs) Citroen Jumper Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat. The slat T slots and side profiles take standard M8 hex bolts top and bottom. Shipping Dimensions:Width: 300mm (12'')Length: 1805mm (71'')Height: 195mm (8'')Shipping Weight:Weight: 36.35kg (80lbs)

KVCJ003T - Citroen Jumper (L2H2/136” WB/High Roof) (2014-Current) Slimpro Van Rack Kit - by Front Runner Consisting of:3x FAVF002 - FPCR Foot Set - by Front Runner1x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps4x RRNS1475 - Narrow Slat / 1475mm (Pair)1x SPVT002 - Van Rack Side Profile / 1358mm1x SPVT003 - Van Rack Side Profile / 1560mm1x WDST013 - Wind Deflector Van Rack 30mm Lip Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Assembled Rack Kit Dimensions:2974mm (117.1'') L x 1565mm (61.6'') W x 127mmH (5'') H Approximate Installed Weight: 31.49kg (69.42lbs) Citroen Jumper Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat. The slat T slots and side profiles take standard M8 hex bolts top and bottom. Shipping Dimensions:Width: 300mm (12'')Length: 1805mm (71'')Height: 195mm (8'')Shipping Weight:Weight: 36.35kg (80lbs)

KVPB004T - Citroen Jumper (L3H2/159” WB/High Roof) (2014-Current) Slimpro Van Rack Kit - by Front Runner Consisting of:4x FAVF002 - FPCR Foot Set - by Front Runner1x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps5x RRNS1475 - Narrow Slat / 1475mm (Pair)2x SPVT004 - Van Rack Side Profile / 1762mm1x WDST013 - Wind Deflector Van Rack 30mm Lip Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Assembled Rack Kit Dimensions:3580mm (141'') L x 1565mm (61.6'') W x 127mm (5'') H Approximate Installed Weight: 40.94kg (90.26lbs) Citroen Jumper Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat. The slat T slots and side profiles take standard M8 hex bolts top and bottom. Shipping Dimensions:Width: 300mm (12'')Length: 1805mm (71'')Height: 195mm (8'')Shipping Weight:Weight: 44.35kg (98lbs)

KVCJ005T - Citroen Jumper (L4H2/159” WB/High Roof) (2014-Current) Slimpro Van Rack Kit - by Front Runner Consisting of:5x FAVF002 - FPCR Foot Set - by Front Runner2x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps5x RRNS1475 - Narrow Slat / 1475mm (Pair)1x SPVT001 - Van Rack Side Profile / 1156mm2x SPVT002 - Van Rack Side Profile / 1358mm1x WDST013 - Wind Deflector Van Rack 30mm Lip Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Assembled Rack Kit Dimensions:3928mm (154.6'') L x 1565mm (61.6'') W x 127mm (5'') H Approximate Installed Weight: 42.17kg (92.97lbs) Citroen Jumper Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat. The slat T slots and side profiles take standard M8 hex bolts top and bottom. Shipping Dimensions:Width: 300mm (12'')Length: 1805mm (71'')Height: 195mm (8'') Shipping Weight:Weight: 43.35kg (95lbs)

Materials used:Black high density polyethelene (HDPE) plasticProduct Dimensions:L 440mm (17.3'') x W 315mm (12.4'') x H 210mm (8.3'')Internal Dimensions:L 385mm (15.2'') x W 270mm (10.6'') x H 185mm (7.3'')Weight:2.04kg (3.52lbs)Special NotesSKU M-FRO/001

Consists of:4 x Plastic lid sliding latchesMaterials used:PlasticProduct Dimensions:Packaged:140mm (5.5) L x 100mm (3.9) W x 10mm (0.4) HSingle Sliding-Latch:40mm (1.6) L x 10mm (0.4) W x 20mm (0.8) H

KRDR003T - Ram Mega Cab 4-door (2002-2008) Slimline II Load Bed Rack Kit - by Front Runner Consisting of: 3x LASS026 - Universal Load Bed Leg / Tall (Pair)1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L)1x TRBU001 - Pick-Up Load Bed Tracks / 1000mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 31.9kg (70.33lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 450mm (18'')Length: 1730mm (68'')Height: 140mm (6'')Shipping Weight:Weight: 31.62kg (70lbs)

KRDR007T - Ram Mega Cab 4-door (2009- current) Slimline II Load Bed Rack Kit - by Front Runner Consisting of: 3x LASS026 - Universal Load Bed Leg / Tall (Pair)1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L)1x TRBU001 - Pick-Up Load Bed Tracks / 1000mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 31.9kg (70.33lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 450mm (18'')Length: 1730mm (68'')Height: 140mm (6'')Shipping Weight:Weight: 33.25kg (73lbs)