ACCESSORY

Consists of:1x Jerry can with air-tight cap Materials used:Black painted steel Product Dimensions:350mm (13.8'') L x 165mm (6.5'') W x 460mm (18.1'') H Weight:3.82kg (8.42lbs)Special Notes SKU 20LJCB

Consists of:1 x Lightbar1 x Set of Front Mount Brackets (1 Left Hand side 1 Right Hand side)1 x Set of Underneath Mount Brackets (1 Left Hand side 1 Right Hand side)1 x Front CoverInstallation HardwareFitting Instructions Materials used:Black powder coated steel and aluminium mounting brackets Product Dimensions:Light Bar:1031mm (40.6'') L x 67mm (2.6'') D x 35mm (1.4'') H Light Bar with Bracket:1070mm (42.1'') L x 102mm (4'') W x 58mm (2.3'') H Weight:5.56kg (12.3lbs) Special Notes:Product type: On-road and off-roadSKU: VX1000-CB SMLED supplier: OSRAMLumens: 600012/24VColor temperature: 5700 KLifespan Tc: 5000 hGuarantee: 5 yearsDouble ECE-Certification: 2x R112Reference Number: (37,5 + 37,5)

Consists of:1 x 4'' 27W Square LED Work Light1 x Mounting Bracket Set Materials used:Aluminum housingPMMA polycarbonateStainless steel mounting brackets Product Dimensions:128mm (5'') L x 110mm (4.3'') W x 55mm (2.2'') H Weight:0.9kg (2lbs) Special Note:Operating Temperature: -40°C - +60°CIP Rating: IP67Protections: Reverse PolarityInput Voltage: 9-32V DCPower Consumption: 3W*9PCSLuminous Flux: 1620lmCurrent Draw: 2.1A@12V, 1.1A@24VColor Temperature: 6000KBeam Pattern: Flood BeamBeam Angle: 60deg

Consists of:1 x Set of Nut PlatesFitting Instructions Materials used:Black powder coated steel Product Dimensions:90mm (3.5'') H x 28.5mm (01.1'') W x 5mm (0.2'') H (Single Nut Plate) Weight:0.38kg (0.84lbs)

Consists of: Axe bracket, aluminum bush, rubber insert handle bracket, M10 eye nut and bolt kit Product Dimensions: L 340mm (13.38) x W 160mm (6.29) x H 85mm (3.34) Weight: 1.8kg (3.96lbs)

Consists of: Axe bracket, aluminum bush, rubber insert handle bracket, M10 eye nut and bolt kit Product Dimensions: L 340mm (13.38) x W 160mm (6.29) x H 85mm (3.34) Weight: 1.8kg (3.96lbs)

Consists of: M8 Eye Nut x 2 M8 Nylon Washer x 2 M8 Hex Bolt x 2   Materials used: Made from galvanized steel supplied with bolt plastic washer   Product Dimensions: 90mm (3.54'') L x 40mm (1.57'') W x 20mm (0.78'') H   Weight: 0.12kg (0.26lbs)

Material used:Mild steelConsists of:2x Ring bolts2x M8 RivnutsWeight:0.12kg (0.26lbs)

Consists of:1 x Cargo Slide/Fridge Slide Installation HardwareFitting Instructions Materials used:Black powder coated steel Product Dimensions:Overall Dimensions732mm (28.8'') L x 468mm (18.4'') W x 88mm (3.5'') H Closed Dimensions:732mm (28.8'') L x 468mm (18.4'') W x 88mm (3.5'') H Opened Dimensions:1332mm (52.4'') L x 468mm (18.4'') W x 88mm (3.5'') H Weight:14.23kg (31.4lbs) Load Rating:90kg (198lbs)

Consists of:1 x Fridge SlideInstallation HardwareFitting Instructions Materials used:Black powder-coated steel Product Dimensions:Overall Dimensions757mm (28.8'') L x 540mm (18.4'') W x 88mm (3.5'') H Closed Dimensions:757mm (28.8'') L x 540mm (18.4'') W x 88mm (3.5'') H Opened Dimensions:1457mm (52.4'') L x 540mm (18.4'') W x 88mm (3.5'') H Weight:18.34kg (40.4lbs) Load Rating:90kg (198lbs)

Consists of:1 x Fridge SlideInstallation HardwareFitting Instructions Materials used:Black powder-coated steel Product Dimensions:Overall Dimensions:1002mm (39.4'') L x 591mm (23.3'') W x 88mm (3.5'') H Closed Dimensions:1002mm (39.4'') L x 591mm (23.3'') W x 88mm (3.5'') H Opened Dimensions:1902mm (74.9'') L x 591mm (23.3'') W x 88mm (3.5'') H Weight:24.96kg (55lbs) Load Rating:113kg (249lbs)

Consists of:1 x Slimsport Rack Wind FairingInstallation HardwareFitting Instructions Materials used:Black powder coated steel Product Dimensions:1175mm (46.3'') L x 176mm (6.9'') W x 187mm (7.4'') H Weight:2.9kg (6.4lbs)

Materials used:Black high density polyethelene (HDPE) plasticProduct Dimensions:L 440mm (17.3'') x W 315mm (12.4'') x H 210mm (8.3'')Internal Dimensions:L 385mm (15.2'') x W 270mm (10.6'') x H 185mm (7.3'')Weight:2.04kg (3.52lbs)Special NotesSKU M-FRO/001

Consists of:4 x Plastic lid sliding latchesMaterials used:PlasticProduct Dimensions:Packaged:140mm (5.5) L x 100mm (3.9) W x 10mm (0.4) HSingle Sliding-Latch:40mm (1.6) L x 10mm (0.4) W x 20mm (0.8) H

Consists of:1 x Strap AssemblyInstallation HardwareFitting InstructionsMaterials used:Black powder coated high strength steelProduct Dimensions:513mm (20.2'') L x 325mm (12.8'') W x 320mm (12.6'') HWeight:1.7kg 93.8(lbs)

Consists of: 3x Brackets 1x Nuts and Bolts kit   Product Dimensions: 49mm (1.92'') L x 128mm (5.03'') W x 87.5mm (3.44'') H   Weight: 1.36kg (2.99lbs)   Materials used: 3mm (0.118'') Black powder coated steel

Wash’n Seal with Carnauba Wax  is not just any car wash. It is a complete car cleaning and waxing process in one. Our E-Valence Technology ensures it’s simply the best wash and wax to bring out the natural lustre in the paint. Additionally, it contains a UV inhibitor which will help to protect the paint from the suns harmful UV rays.

Glass Cleaner with Anti-Fog & Antimicrobial  is the premier glass and window cleaner for dedicated motoring enthusiasts and professional detailers. Specially formulated to clean glass, repel fog and kill and inhibit microbial growth.

Instant Detailer with Carnauba Wax  is a spray on wax which will provide a finish to satisfy even the most dedicated motoring enthusiast.

Intermediate Cutting Polish  will remove medium and lite scratches, restoring the paint to its original lustre. An all in one process that effortlessly wipes off after application.

Leather Cleaner   with Antimicrobial  is the ‘go-to’ leather and cleaner for dedicated motoring enthusiasts. It gently agitates and removes dirt and microbial growth(black spots) from all leather and non-leather upholstery surfaces.

Leather Creme  the ultimate leather & leatherette enrichment and protection process for motoring enthusiasts.

Polish & Wax Applicator Kit  is recommended for the manual application of the E-Valence range of polishes and waxes and other selected products.

Preeminent 50% Carnauba Wax  is the flagship of our product line. It is the best car wax on the market today. It will enhance, protect, and seal the lustre in the paint for up to 12 months*. Known as the “queen of waxes”, Carnauba Wax occurs naturally in Brazil.  It is a by-product from the leaf of the carnauba palm. An exceptionally hard and durable wax. Making it the best natural, long term paint protection against UV rays for cars, boats, bikes, and planes.

Tar Rubber & Bug Remover  only removes what you don’t want. That said it removes everything you don’t

pH Neutral Alloy & Wire Wheel Cleaner  is the unparalleled alloy and wire wheel cleaner available on the market today. It is 100% water based, 100% biodegradable and 100% silicone, solvent and VOC(Volatile Organic Compounds) free. A sensible balance of mild surfactants rather than a mix of aggressive high-level alkali and acid chemicals.

Consists of:RRAC066 - Expedition Tubing D (525.5mm and 365.5mm) RRAC071 - Expedition Rail Corner SetRRAC072 - Expedition Rail LH RH Drop SetRRAC073 - Expedition Rail Joiner   Materials used:Powder coated Aluminium die cast jointsPowder coated 304 Stainless Steel tubing Product Dimensions:485mm (19.1'') L x 1255mm (49.4'') W x 112mm (4.4'') H   Weight:2.42kg (5.3lbs)

Consists of:RRAC067 - Expedition Tubing G (570.5mm)RRAC071 - Expedition Rail Corner SetRRAC072 - Expedition Rail LH RH Drop SetRRAC073 - Expedition Rail Joiner Materials used:Powder coated Aluminium die cast jointsPowder coated 304Stainless Steeltubing Product Dimensions:690mm (27.2) L x 1345mm (53) W x 112mm (4.4) H Weight:2.74kg (6lbs)

Consists of:RRAC068 - Expedition Tubing J (610.5mm and 570.5mm)RRAC071 - Expedition Rail Corner SetRRAC072 - Expedition Rail LH RH Drop SetRRAC073 - Expedition Rail Joiner Materials used:Powder coated Aluminium die cast jointsPowder coated 304 Stainless Steel tubing Product Dimensions:690mm (27.2) L x 1425mm (56.1) W x 112mm (4.4) H Weight:2.84kg (6.3lbs)

Consisting of:1x RRAC072 - Expedition Rail LH + RH Drop Set1x RRAC073 - Expedition Rail Joiner1x RRAC085 - Expedition Rail Tubing 07 (480mm) Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Product Dimensions:1231mm (48.5'') L x 21mm (0.8'') W x 63mm (2.5'') H Weight:1.1 kg (2.4 lbs)

Consists of:2x RRAC066 - Expedition Tubing D (525.5mm and 365.5mm) 2x RRAC071 - Expedition Rail Corner Set2x RRAC072 - Expedition Rail LH RH Drop Set3x RRAC073 - Expedition Rail Joiner 1x KRXX001 - Expedition Rail Middle Kit Materials used:Powder coated Aluminium die cast jointsPowder coated 304 Stainless Steeltubing Product Dimensions:Min: 752mm (29.6) - Max: 2772mm (109.1) L x 1255mm (49.4) W x 112mm (4.4) H Weight:7.62kg (16.8lbs)

Consists of:2x RRAC068 - Expedition Tubing J (610.5mm and 570.5mm)2x RRAC071 - Expedition Rail Corner Set2x RRAC072 - Expedition Rail LH RH Drop Set3x RRAC073 - Expedition Rail Joiner 1x KRXX001 - Expedition Rail Middle Kit Materials used:Powder coated Aluminium die cast jointsPowder coated 304Stainless Steeltubing Product Dimensions:Min: 752mm (29.6) - Max: 2772mm (109.1) L x 1425mm (56.1) W x 112mm (4.4) H Weight:8.46kg (18.6lbs)

Consists of:6x Tubular rails2x Cast LH drop downs2x Cast RH drop downs4x Mid-joints with C-clipsInstallation hardware Materials used:Black powder-coated stainless steelBlack powder-coated die cast aluminium Product Dimensions:1844mm (72.6) L x 20mm (0.8) W x 62mm (2.4) H This is one side only (LH RH same dimensions) Weight:3.1kg (6.8lbs)

Consists of:6x Tubular rails2x Cast LH drop downs2x Cast RH drop downs4x Mid-joints with C-clipsInstallation hardware Materials used:Black powder-coated stainless steelBlack powder-coated die cast aluminium Product Dimensions:2046mm (80.6) L x 20mm (0.8) W x 62mm (2.4) H This is one side only (LH RH same dimensions) Weight:3.6kg (7.9lbs)

Consists of:8x Tubular rails2x Cast LH drop downs2x Cast RH drop downs6x Mid-joints with C-clipsInstallation hardware Materials used:Black powder-coated stainless steelBlack powder-coated die cast aluminium Product Dimensions:2248mm (88.5) L x 20mm (0.8) W x 62mm (2.4) H This is one side only (LH RH same dimensions) Weight:3.87kg (8.5lbs)

Consists of:1x Tow neck1x Tow ball1x Pin1x R-clipNuts and bolts kit Materials used:Black powder-coated mild steel Weight:5.2kg (11.5lbs)

Material used: Tank: BPA-free polyethylene Fittings: Plastic   Capacity: 40l (10.6gal)   Product Dimensions: W 1200mm (47.2'') x H 180mm (7.1'') x L 250mm (9.8'')   Cut-out: W 210mm (8.3'') - W 300mm (11.8'') x H 110mm (4.3'')   Weight: 4.98kg (11lbs)Special NotesSKU CR1297-GY-COMP

KRFM005T - Ford DC (2012-2022) Slimline II Roof Rack Kit - by Front RunnerConsisting of: 1x FASS012 - Foot Set / 40mm - 50mm1x FASS014 - Foot Set - Angled / 65mm1x RRSTD06 - SLII Tray - 1255mm(W)X1156mm(L)1x TRFR001 - Ford Ranger (2012-Current) Tracks / 1200mm(L)1x WDST010 - Wind Deflector 20mm Lip Narrow Pair /1255mm(W)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 25.11kg (55.36lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 450mm (18'')Length: 1730mm (68'')Height: 140mm (6'')Shipping Weight:Weight: 28.43kg (63lbs)

Consists of:1 x Ford F-150 Super Crew Slimsport Rack Wind FairingInstallation HardwareFitting Instructions Materials used:Black powder coated steel Product Dimensions:1405mm (55.3'') L x 219mm (8.6'') W x 223mm (8.8'') H Weight:4.02kg (8.9lbs)

Consists of:1 x Slimsport Rack 40'' Light Bar Wind Fairing1 x Protection StripInstallation HardwareFitting Instructions Materials used:Black powder coated steel Product Dimensions:1405mm (55.3'') L x 210mm (8.3'') W x 119mm (4.7'') H Weight:4.55kg (10lbs)

Consists of:1 x Ford F-150 Super Crew Slimsport Rack Wind Fairing1 x Protection StripInstallation HardwareFitting Instructions Materials used:Black powder coated steel Product Dimensions:1405mm (55.3'') L x 219mm (8.6'') W x 223mm (8.8'') H Weight:4.02kg (8.9lbs)

Reduce the drag and wind noise over the roof rack of your Ford Ranger T6.2 Double Cab with a wind fairing. The Slimsport Rack Wind Fairing channels air fluidly over your Slimsport Roof Rack (and the accessories loaded on it) to help reduce fuel consumption.

Coming Soon!

Consists of: 1x Metal spout attachment 1x Flexible nozzle Materials used: Black painted metal Fuel resistant plastic Product dimensions: W 75mm(3) x L 60mm (2.4) x H 292mm (11.5) Weight: 0.3kg (0.7lbs)

Consists of:1 x T-Hinge Materials used:Black powder coated die cast zinc Product Dimensions:104mm (4.1'') L x 68mm (2.7'') W x 10mm (0.4'') H

Consists of: 1x Handle bracket 1x Base bracket Bolt kit   Materials used: Black powder-coated steel   Weight: 2.1kg (4.63lbs)

Consists of:1 x Handle bracket1 x Base bracketInstallation HardwareFitment Instructions Material used:Black powder coated high strength steel Product Dimensions:Handle Bracket:155mm (6.1'') L x 85mm (3.4'') W x 110mm (4.3'') H Base Bracket:69mm (2.1'') L x 207mm (8.2'') W x 115mm (4.5'') H Weight:2.34kg (5.2lbs)

Consists of:1 x Rubber SleeveMaterials used:Cold cure elastomer polymer plasticProduct Dimensions:190mm (7.5) L x 155mm (6.1) W x 45mm (1.8) HWeight:0.13kg (0.3lbs)

Consists of:1 x Set of Nut PlatesFitting Instructions Materials used:Black powder coated steel Product Dimensions:85mm (3.3'') L x 23.5mm (0.9'') W x 5mm (0.2'') H (Single Nut Plate) Weight:0.35kg (0.77lbs)

KRJG004T - Jeep Grand Cherokee WK2 (2011-Current) Slimline II Roof Rack Kit - by Front Runner Consisting of:1 x FAJG001 - Jeep Grand Cherokee Foot Rails - by Front Runner 1 x RRSTD08 - Slimline II Tray - 1255mm(W) X 1560mm(L) - by Front Runner Material used:Black epoxy powder-coated T6 aluminium High strength steelApproximate Installed Weight 27kg (60lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2) to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width450mm (18)Length1615mm (64)Height 140mm (6)Shipping Weight:Weight31.5kg (69.3lbs)

Material used: Brackets: high strength steel and black powder coated Slats: Black powder coated aluminium Product Dimensions: W 1475mm (58.1) x D 550mm (21.7) x H 50mm (1.96) Weight: 25.54kg (56.31lbs)

Consists of:1 x Flat Roller Drawer1 x Front Mounting StrapInstallation HardwareMaterials used:Black powder-coated mild steelProduct Dimensions:852mm (33.5) L x 898mm (35.4) W x 128mm (5) HInternal Tray Dimensions:778mm (30.6) L x 780mm (30.7) W x 60mm (2.4) DWeight:29kg (63.9lbs)Load Rating:113 kg (250lbs)

Consists of:1 x Latch Keeper Materials used:Black power coated stainless steel Product Dimensions:50mm (2'') L x 15mm (0.6'') W x 43mm (1.7'') H Weight:22g (0.8oz)

Consists of:2 x Front Cradle Rests2 x Rear Cradle Rests2 x StrapsInstallation HardwareFitting Instructions Product Dimensions:200mm (7.9'') L x 100mm (3.9'') W x 200mm (7.9'') H Weight:3.1kg (6.8lbs) Load Rating: 40kg (88.2lbs)

KRLD003L - Land Rover Defender 110 (1983-2016) Slimline II Roof Rack Kit - by Front Runner Consisting of: 4 x LASS107 - No 7 Leg 225mm (Pair) - by Front Runner 1 x RRSTJ14 - Slimline II Tray - 1425mm(W) X 2772mm(L) - by Front Runner   Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight 42kg (92lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.   Shipping Dimensions: Width 450mm (18'')Length 1615mm (64'')Height 140mm (6'')   Shipping Weight: Weight 48.8kg (107.3lbs)

Consists of:1 x Land Rover Defender 90 110 (1983-2016) LadderInstallation HardwareFitting Instructions Materials used:Black Powder coated steel aluminium Product Dimensions:155mm (6.1'') L x 230mm (9.1'') W x 721mm (28.4'') H Weight:4.51kg (9.9lbs)

Consists of:1 x Spare StrapMaterials used:Black powder coated high strength steelProduct Dimensions:385mm (15.2'') L x 38mm (1.5'') W x 112mm (4.4'') HWeight:318g (11.2oz)

Consists of:1 x Assembled ladder1 x Z-bracketBolt kitMaterials used:304 Stainless steelElectroplated and black powder coatedWeight:4kg (8.8lbs)

KRLD012L - Land Rover Discovery 2 Slimline II Roof Rack Kit Consisting of: 4x LASS109 - No 9 Leg 265mm (Pair)1x RRSTM11 - SLII Tray - 1475mm(W)X2166mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 37.68kg (83.07lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 450mm (18'')Length: 1730mm (68'')Height: 140mm (6'')Shipping Weight:Weight: 38.55kg (85lbs)

KRLD028T - Land Rover Discovery LR3/LR4 Slimline II Roof Rack Kit - by Front Runner Consisting of: 1x FALD003 - Land Rover Discovery LR3 + LR4 Foot Rails1x RRSTD11 - SLII Tray - 1255mm(W)X2166mm(L) Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 39.97kg (88.12lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18'') Length: 1730mm (68'') Height: 140mm (6'') Shipping Weight: Weight: 41.63kg (92lbs)

Consists of:1 x Non Adjustable Latch with Safety Catch Materials used:Stainless steel Product Dimensions:98mm (3.9'') L x 25mm (1'') W x 21mm (0.8'') H Weight:68g (2.4oz)

Consists of:1 x Lockable StrapInstallation HardwareFitting InstructionsMaterials used:Black powder coated high strength steelProduct Dimensions:477mm (18.8'') L x 96mm (3.8'') W x 113mm (4.5'') HWeight:700g (24.7oz)

Consists of:1 x  LadderInstallation HardwareFitting Instructions Materials used: Black powder coated aluminiumBlack powder coated steel Product Dimensions:943mm (37.1'') L x 166mm (6.5'') W x 256mm (10.1'') H Weight:4.4kg (9.7lbs)

KRNP004L - Nissan Patrol Slimline II Roof Rack Kit - by Front Runner Consisting of: 3 x No 1 Leg 120mm (Pair) - by Front Runner1 x No 2 Leg 130mm (Pair) - by Front Runner1 x RRSTG11 - Slimline II Tray - 1345mm(W) X 2166mm(L) - by Front Runner   Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight 34kg (74lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.   Shipping Dimensions: Width 450mm (18'')Length 1615mm (64'')Height 140mm (6'')   Shipping Weight: Weight 39.2kg (86.2lbs)

Consists of:2x Brackets2x Stratchit StrapBolt Kit Materials used:Black powder-coated SteelPolyethylene pads Product dimensions:L 276mm (10.9'') x W 76mm (3'') x H 67mm (2.6'') Weight:Individual bracket: 0.6kg (1.3lbs)Entire kit: 2.9kg (6.4lbs)

Consists of:1 x Pro Water Tank Flat Mount BracketInstallation Hardware Fitting Instructions Materials used:Black powder coated steel Product Dimensions:70mm (2.8'') L x 30mm (1.2'') W x 25mm (1'') H Weight:0.25kg (0.55lbs)

Consists of:1 x Rack LadderFitting Instructions Materials used:Black powder coated aluminium Product Dimensions:In-Use Dimensions:359mm (14.1'') W x 50mm (2'') D x 2200mm (86.6'') H Storage Dimensions:359mm (14.1'') W x 100mm (3.9'') D x 1205mm (47.4'') H Weight:5.33kg (11.8lbs)

Consists of:1 x Pair of Ladder Side Mount BracketsInstallation HardwareFitting Instructions Materials used:Black powder coated high strength steel Product Dimensions:182mm (7.2'') L x 87mm (3.4'') W x 397mm (15.6'') H Weight:3kg(6.6lbs)

Consists of:2 x Adjustable BracketsInstallation HardwareFitting InstructionsMaterials used:Black powder coated corrosion resistant steelProduct Dimensions:80mm (3.2'') L x 61mm (2.4'') W x 66mm (2.6'') H (Single Bracket)Weight:210g (7.4oz) (Pair)

Consists of:1 x Mounting PlateInstallation HardwareFitting InstructionsMaterials used:Black powder coated high strength steelProduct Dimensions:480mm (18.9'') L x 248mm (9.8'') W x 18mm (0.7'') HWeight:1.9kg (4.2lbs)

Consists of:1 x Strap Assembly1 x Base1 x CatchInstallation HardwareFitting InstructionsMaterials used:Black powder coated high strength steelProduct Dimensions:513mm (20.2'') L x 165mm (6.5'') W x 370mm (14.6'') HWeight:2.4kg (5.3lbs)

Material used: Tank: BPA-free polyethylene Fittings: Plastic   Capacity: 50l (13.2gal)   Product Dimensions: W 1000mm (39.4'') x H 350mm (13.8'') x L tapered 200mm (7.9'') to 150mm (5.9'')   Weight: 5.08kg (11.2lbs)Special NotesSKU HT029FR-GY-COMP

Material used: Stainless steel Consists of: 2x Ring nuts 2x Bolts 2x Plastic washers Weight: 0.12kg (0.26lbs)

Consists of:2 x Ladder BracketsInstallation HardwareFitting Instructions Materials used:Black powder coated high strength steel Product Dimensions:316mm (12.5'') L x 75mm (3'') W x 57mm (2.3'') H (per Single Bracket) Weight:1.3kg (2.9lbs)

Consists of:4 x Tent Mount Kit / Tall Brackets Materials used:2mm (0.078”) Black powder coated steelProduct Dimensions:245mm (9.6'') L x 70mm (2.4'') D x 57mm (2.2'') HWeight:1.5kg (3.3lbs)

THIS IS A TEST PRODUCT

Consists of:1 x Table Materials used:Black composite table top with aluminium finishBlack powder coated steel frameBlack powder coated aluminium legs Product Dimensions:Closed Dimensions:1130mm (44.5'') L x 750mm (29.5'') W x 32mm (1.3'') H Open Dimensions:1130mm (44.5'') L x 750mm (29.5'') W x 750mm (29.5'') H Weight:11.2kg (24.7lbs)

Consists of:2 x Table Slide Bracket1 x Table LatchInstallation HardwareFitment Instructions Materials used:Black powder-coated high strength steel Product Dimensions:Single Side Bracket Dimensions:980mm (38.6'') L x 63mm (2.5'') W x 44mm (1.8'') H Latch Dimensions:50mm (2'') L x 50mm (2'') W x 115mm (4.5'') HWeight:4kg (8.8lbs)

Consists of:1 x Under Rack Table1 x Pro Table Under Rack Bracket1 x Under Rack Table Latch Under Rack Table:Materials used:Black composite table top with aluminium finishBlack powder coated steel frameBlack powder coated aluminium legs Product Dimensions:Closed Dimensions:1130mm (44.5'') L x 750mm (29.5'') W x 32mm (1.3'') H Open Dimensions:1130mm (44.5'') L x 750mm (29.5'') W x 750mm (29.5'') H Weight:11.2kg (24.7lbs) Under-Rack Table Latch:Materials used:Black Powder-coated high strength steel PVC Grommet Product Dimensions:115mm (4.5'') H x 50mm (2'') W x 50mm (2'') L Weight:200g (7oz) Under-Rack Table Bracket:Materials used:Black Powder-coated high strength steel PVC Grommet Product Dimensions:980mm (38.6'') L x 63mm (2.5'') W x 44mm (1.8'') H (Single Bracket) Weight:3.8kg Full Kit Dimensions:1160mm (14.2'') L x 837mm (33'') W x 114mm (4.5'') H Full Kit Weight:15.2kg (33.5lbs) TABLE CARE: Keep your table clean and sparkling with these easy care instructions. Add a small amount of dish soap to a damp soft cloth.Dry excess moisture with a dry towel. Done!

Consists of:2 x Pair of Nut PlatesFitting Instructions Materials used:Black powder coated steel Product Dimensions:95mm (3.7'') L x 33.5mm (1.3'') W x 4mm (0.15'') H (Single Nut Plate) Weight:0.52kg (1.15lbs)

Consists of:1 x Universal Side Mount for Pro Water Tank / 20LInstallation HardwareFitting Instructions Materials used:Black powder coated steel Product Dimensions:211mm (8.3'') L x 341mm (13.4'') W x 237mm (9.3'') H Weight:2.06kg (4.5lbs)

Material used: Cast brass with chrome-plated protective coatingWeight: 0.32kg (0.7lbs)

Consists of:1 x Vertical Jerry Can HolderInstallation HardwareFitting InstructionsMaterials used:Black powder coated high strength steelProduct Dimensions:200mm (7.9'') L x 395mm (15.6'') W x 475mm (18.7'') HWeight:4.6kg (10.1lbs)

Consists of:1 x Volkswagent T5/T6 Slimsport Rack Wind FairingInstallation HardwareFitting Instructions Materials used:Black powder coated steel Product Dimensions:1344mm (52.9'') L x 185mm (7.3'') W x 155mm (6.1'') H Weight:2.3kg (5.1lbs)

Materials used:Black high density polyethelene (HDPE) plasticProduct Dimensions:510mm (20.1) L x 400mm (15.8) W x 230mm (9.1) HInternal Dimensions:450mm (17.7) L x 340mm (13.4) W x 205mm (8.1) HWeight:3.00kg (6.6lbs)

Materials used:Black high density polyethelene (HDPE) plastic Hi-Lid Product Dimensions (Lid Only):400 (15.7'') L x 510mm (20.1'') W x 90mm (3.5'') H Hi-Lid Weight (Lid Only):1.1kg (2.4lbs) Wolf Pack Hi-Lid Dimensions:400mm (15.7'') L x 510mm (20.1'') W x 295mm (11.6'') H Internal Dimensions:335mm (13.2'') L x 445mm (17.5'') W x 275mm (10.8'') H Weight:3.3kg (7.3lbs)

Consists of:1 x Wolf Pack Pro Mounting BracketsFitting Instructions Materials used:Black powder coated steel Product Dimensions:101mm (4'') L x 309mm (12.2'') W x 255mm (10'') H (Per Bracket) Weight:1.65kg (3.6lbs)

A durable and versatile way to mount your solar panel kit to your Front Runner Roof Rack. Made from high-strength steel and coated with a durable finish, these four brackets are compatible with all Front Runner Roof Racks and allow you to configure the placement of your Zamp Obsedian solar panels either perpendicular or parallel, depending on your needs.