ALL ROOF RACKS

Unlock your van's storage potential with this highly versatile, low-profile roof rack kit for the LDV/Maxus G10.A. For long-distance van life missions, weekend trips, or hauling work equipment such as ladders and pipes, the Slimpro Van Rack can comfortably support large loads. It features an adjustable slat system to accommodate roof-mounted equipment, such as air conditioning units, skylights, and air vents.

A Jeep made for rugged adventures requires an extreme roof rack, and none are tougher than Front Runner's Slimline II, the original overland rack. Buy this rack and access the more than 55 available accessories. This rack and accessories will give you complete peace of mind on the toughest trails out there.

KRVC013T - Volkswagen Caddy (2015 - 2020) LWB Slimline II Roof Rack Consisting of:1x FAVC002 - Volkswagen Caddy (2015-2020) LWB Foot Rail1x RRSTA10 - SLII Tray - 1165mm(W)X1964mm(L) Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 32.71kg (72.11lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 445mm (18'')Length: 1720mm (68'')Height: 265mm (10'') Shipping Weight:Weight: 37kg (81lbs)

Consists of:4 x M10 x 100 Hex Bolt4 x M10 x 60 Hex Bolt4 x M10 x 30 x 3 SS Flat Washer4 x M10 Eye Nut4 x M10 Nylock Nut Materials used:Black powder-coated high strength steel Weight:0.78kg (1.7lbs)

Consists of:1 x Pro Bed Universal Accessory Mount1 x Pro Bed Recovery Device Mounting HardwareInstallation HardwareFitment Guide Materials used:Black powder coated steel Product Dimensions:490mm (19.3'') L x 200mm (7.9'') W x 30mm (1.9'') H (Per Single Bracket) Weight:3.28kg (7.2lbs)

Consists of:4 x Molle PanelInstallation HardwareFitting InstructionsMaterials used:Black powder coated steelProduct Dimensions:1200mm (47.2'') L x 30mm (1.18'') W x 496mm (19.53'') HWeight:7.7kg (17lbs)

Consists of:4 x Molle PanelInstallation HardwareFitting InstructionsMaterials used:Black powder coated steelProduct Dimensions:1400mm (55.12'') L x 30mm (1.18'') W x 496mm (19.53'') HWeight:9.2kg (20.3lbs)

KRID014T - Isuzu D-MAX RG 3rd Gen Extended Cab (2020-Current) Slimline II Roof Rack Kit / Low Profile - by Front RunnerConsisting of: 1x FAIK004 - Isuzu D-MAX RG 3rd Gen Ex Cab (2020-Current) Foot Rails1x RRSTA05 - SLII Tray - 1165mm(W)X954mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 19.36kg (42.68lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17'')Length: 1730mm (68'')Height: 260mm (10'')Shipping Weight:Weight: 19.36kg (43lbs)

KRSF006T - Suzuki Fronx (2023 - Current) Slimline II Roof Rack Consisting of:1x FASF001 - Suzuki Fronx (2023 - Current) Foot Rails1x RRSTA07 - SLII Tray - 1165mm(W)X1358mm(L) Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 23.14kg (51.01lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 595mm (23'')Length: 1720mm (68'')Height: 160mm (6'') Shipping Weight:Weight: 29kg (64lbs)

KSFR008T - Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Slimsport Roof Rack Kit / Lightbar Ready Consisting of: 1x KSFR006 - Ford Ranger T6.2(22+)/VW Amarok(23+)DC Ssport Tray1x RRAC312 - Ford Ranger T6 Dbl Cab(22-Curr)SlmSprt 40'' Lbar WFMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelAssembled Rack Dimensions:1448mm (57'') L x 1233mm (48.5'') W x 147mm (5.8'')Approximate Installed Weight: 21.23kg (46.8lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4''-2.8'') to the highest point of your roof.Shipping Dimensions:Width: 330mm (13'')Length: 1700mm (67'')Height: 225mm (9'')Shipping Weight:Weight: 26kg (57lbs)

KSFR009T - Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Slimsport Roof Rack Kit Consisting of: 1x KSFR006 - Ford Ranger T6.2(22+)/VW Amarok(23+)DC Ssport Tray1x RRAC313 - Ford Ranger T6 Dbl Cab(22-Curr)SlmSprt WFMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelAssembled Rack Dimensions:1448mm (57'') L x 1233mm (48.5'') W x 147mm (5.8'')Approximate Installed Weight: 21.95kg (48.39lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4''-2.8'') to the highest point of your roof.Shipping Dimensions:Width: 330mm (13'')Length: 1700mm (67'')Height: 225mm (9'')Shipping Weight:Weight: 26kg (57lbs)

KVTH002T - Toyota Hiace LWB High Roof (2019-Current) Slimpro Van Rack Kit Consisting of:2x FAVF005 - Volkswagen Crafter Van Rack Foot Set / 65mm1x FAVF006 - Volkswagen Crafter Van Rack Foot Set / 90mm1x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps1x RRAC978 - Toyota HiAce LWB(2019-) SlimPro Rack Spacer4x RRNS1255 - Narrow Slat / 1255mm (Pair)1x SPVT001 - Van Rack Side Profile / 1156mm1x SPVT004 - Van Rack Side Profile / 1762mm1x WDST013 - Wind Deflector Van Rack 30mm Lip Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Assembled Rack Kit Dimension: 2975mm (177.1'') L x 1345mm (53'') W x 135mm (5.3'') H Approximate Installed Weight: 28.57kg (62.99lbs) Toyota Hiace Van Rack Kit heights are adjustable from 85mm (Z bracket inverted) to 131mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat. The slat T slots and side profiles take standard M8 hex bolts top and bottom. Shipping Dimensions:Width: 445mm (18'')Length: 1770mm (70'')Height: 160mm (6'') Shipping Weight:Weight: 35kg (77lbs)

KVVC004T - Volkswagen Crafter (L4H2/ MWB/OEM Track) (2017-Current) Slimpro Van Rack Kit Consisting of:6x FAVF005 - Volkswagen Crafter Van Rack Foot Set / 65mm2x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps3x RRAC940 - Merc Bens Sprinter Slimpro Van Track T-Bolt Kit5x RRNS1345 - Narrow Slat / 1345mm (Pair)1x SPVT001 - Van Rack Side Profile / 1156mm2x SPVT002 - Van Rack Side Profile / 1358mm1x WDST013 - Wind Deflector Van Rack 30mm Lip Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Assembled Rack Kit Dimensions:3930mm (154.7'') L x 1460mm (57.5'') W x 135mm (5.3'') H Approximate Installed Weight: 38.84kg (85.63lbs) Volkswagen Crafter Van Rack Kit heights are adjustable from 116mm (Z bracket inverted) to 158mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat. The slat T slots and side profiles take standard M8 hex bolts top and bottom.Shipping Dimensions:Width: 445mm (18'')Length: 1720mm (68'')Height: 160mm (6'') Shipping Weight:Weight: 47kg (103lbs)

KVVC005T - Volkswagen Crafter (L3H2/ MWB/OEM Track) (2017-Current) Slimpro Van Rack Kit Consisting of:6x FAVF005 - Volkswagen Crafter Van Rack Foot Set / 65mm1x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps3x RRAC940 - Merc Bens Sprinter Slimpro Van Track T-Bolt Kit4x RRNS1345 - Narrow Slat / 1345mm (Pair)2x SPVT003 - Van Rack Side Profile / 1560mm1x WDST013 - Wind Deflector Van Rack 30mm Lip Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Assembled Rack Kit Dimensions:3180mm (125.2'') L x 1460mm (57.5'') W x 85mm (3.4'') H Approximate Installed Weight: 32kg (70.55lbs) Volkswagen Crafter Van Rack Kit heights are adjustable from 116mm (Z bracket inverted) to 158mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat. The slat T slots and side profiles take standard M8 hex bolts top and bottom. Shipping Dimensions:Width: 445mm (18'')Length: 1720mm (68'')Height: 190mm (7'') Shipping Weight:Weight: 38kg (84lbs)

KRCS016T - Chevrolet Silverado 3rd 4th Gen (2013-Current) Cab Over Camper Slimline II Rack Kit Consisting of: 1x FACS004 - Chev Silverado 3rd 4th gen Shorty foot rails1x RRSTJ04 - SLII Tray - 1425mm(W)X752mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 17.04kg (37.57lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18'')Length: 1720mm (68'')Height: 270mm (11'')Shipping Weight:Weight: 24kg (53lbs)

KRVC015T - Volkswagen Caddy (22 - Curr) SWB Slimline II Roo Consisting of: 1x FAVC001 - Volkswagen Caddy (2022-Current) Footrails1x RRSTD08 - SLII Tray - 1255mm(W)X1560mm(L) Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 27.82kg (61.33lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 445mm (18'') Length: 1720mm (68'') Height: 250mm (10'') Shipping Weight: Weight: 33kg (73lbs)

Consisting of:1x KRXA003 - Expedition Rail Kit - Front or Back -1165mm(W)1x KRXS007 - Expedition Rail Kit - Sides - 752mm to 1358mmMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelProduct Dimensions:1358mm (53.5'') L x 1165mm (45.9'') W x 63mm (2.5'') HWeight:4.13 kg (9.1 lbs)

Consisting of:1x KRXA003 - Expedition Rail Kit - Front or Back -1165mm(W)1x KRXS008 - Expedition Rail Kit - Sides - for 1560mm (L) Rack Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Product Dimensions:1560mm (61.4'') L x 1165mm (45.9'') W x 63mm (2.5'') H Weight:4.63 kg (10.2 lbs)

Consisting of:1x KRXA003 - Expedition Rail Kit - Front or Back -1165mm(W)1x KRXS009 - Expedition Rail Kit - Sides - for 1762mm (L) Rack Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Product Dimensions:1762mm (69.4'') L x 1165mm (45.9'') W x 63mm (2.5'') H Weight:4.92 kg (10.9 lbs)

Consisting of:1x KRXA003 - Expedition Rail Kit - Front or Back -1165mm(W)1x KRXS010 - Expedition Rail Kit - Sides - for 1964mm (L) Rack Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Product Dimensions:1964mm (77.3'') L x 1165mm (45.9'') W x 63mm (2.5'') H Weight:5.17 kg (11.4 lbs)

Consisting of:1x KRXA003 - Expedition Rail Kit - Front or Back -1165mm(W)1x KRXS011 - Expedition Rail Kit - Sides - for 2166mm (L) Rack Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Product Dimensions:2166mm (85.3'') L x 1165mm (45.9'') W x 63mm (2.5'') H Weight:5.69 kg (12.5 lbs)