DEFENDER

Consists of:1 x Aluminum Guard Plate1 x Pair of BracketsInstallation HardwareFitting InstructionsMaterials used:6mm Aluminum plate Black powder coated 8mm mild steelProduct Dimensions:373.5mm (14.7) L x 750mm (29.5) W x 252mm (9.9) H (Including brackets)Weight:18.5kg (40.8lbs)Special Notes:Fits the Land Rover Defender 90 110 series

Consists of: 1x Fastening Kit 2x Pinch Welds2x Side Panels - 1 Left, 1 Right2x Mounting Brackets1x Top Panel2x Wooden Back Panels1x Bottom Panel Materials used: Black powder-coated mild steel Product Dimensions: L 255mm (10)x W 1000mm (39.4)x H 654mm (25.8) Weight: 13.1kg (28.9lbs)

Consists of:1x Wooden shelf1x Mild steel frame1x Fastening Kit   Material used:Shelf: Stained PlywoodFrame: Black powder-coated mild steel   Product dimensions:209mm (8.2'') L x 997mm (39.3'') W x 36mm (1.4'') H   Weight:3.8kg (8.4lbs)

N/D

Land Rover Defender / Discovery 1 HD Maxi-Drive Flange Set Land Rover HD MaxiDrive Probally one of the best HD Drive Flangers On The Market Today. Price is Per Pair Suits All Defender Front And Rear on Standard Axles.  To suit: Land Rover Defenders 1994 Onwards With Disk Brakes All Round Land Rover Discovery 1

Land Rover Defender/Discovery TD5 Air Filter Mahle LR027408

Fits ALL DEFENDERS, DISCOVERY 1 1989 - 1998 and RANGE ROVER CLASSIC. Increase the body clearance to allow the fitment of really big tyres as well as provide an additional 50mm of lift to your suspension. These simple spacers bolt between the coil spring and the axle and can be the perfect way to lift the vehicle to the desired ride height when the load or equipment carried exceeds even the heaviest rated coil springs.

Consists of:1 x Land Rover New Defender Side Mount LadderInstallation HardwareFitting Instructions Materials used:Black powder coated steel Product Dimensions:Closed:295mm (11.6'') L x 215mm (8.5'') W x 860mm (33.9'') H Open:295mm (11.6'') L x 215mm (8.5'') W x 1320mm (52'') H Weight:12.9kg (28.4lbs)

KRLD034T - Land Rover New Defender(2020-Current) 110 Slimline II Roof Rack Kit - by Front Runner Consisting of: 1x FALD008 - Land Rover Defender L663 (2020-Curr) Foot Rails1x RRSTD11 - SLII Tray - 1255mm(W)X2166mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 43.97kg (96.94lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17'')Length: 1730mm (68'')Height: 245mm (10'')Shipping Weight:Weight: 42kg (92lbs)

Consists of:1 x Cargo Slide1 x Cargo Slide MountInstallation HardwareFitting Instruction Materials used:Black powder coated steel Product Dimensions:851mm (33.5'') L x 1087mm (42.8'') W x 170mm (6.7'') H Internal Drawer Dimensions:778mm (30.6'') L x 780mm (30.7'') W x 60mm (2.4'') H Weight:39.19kg (86.4lbs) Load Rating:113kg (250lbs)

KRLD039T - Land Rover New Defender 90 (2020-Current) Slimline II Consisting of: 1x FALD010 - Land Rover Defender 90 (2020-Current) Foot Rails1x RRSTD09 - SLII Tray - 1255mm(W)X1762mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 37.28kg (82.19lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17'')Length: 1730mm (68'')Height: 255mm (10'')Shipping Weight:Weight: 38kg (84lbs)

KRLD037T - Land Rover New Defender(2020-Current) 110 w/OEM Tracks Slimline II Roof Rack Kit - by Front Runner Consisting of: 3x FASS017 - Foot Set / 75mm-85mm3x RRAC930 - Land Rover New Defender (L663) OEM Track Mount Kit1x RRSTD08 - SLII Tray - 1255mm(W)X1560mm(L)1x WDST010 - Wind Deflector 20mm Lip Narrow Pair /1255mm(W) Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 27.51kg (60.65lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17'') Length: 1730mm (68'') Height: 150mm (6'') Shipping Weight: Weight: 27.6kg (61lbs)

KRLD038 - Land Rover New Defender(2020-Current) 90/110 Load Bar Kit Consisting of: 2x FASS017 - Foot Set / 75mm-85mm1x LBSK014 - Roof Load Bar Pair 1255mm(W)1x RRAC044 - Slat to Load Bar Conversion end Cap Kit2x RRAC930 - Land Rover New Defender (L663) OEM Track Mount KitMaterial Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 6.1kg (13.45lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8'') to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8'') to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8'') to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 150mm (6'')Length: 1385mm (55'')Height: 145mm (6'')Shipping Weight:Weight: 5.89kg (13lbs)

The Llams electronic air suspension height controller allows selection of off-road and high-speed   heights at any speed.   Sand, tracks and high-crown outback roads can now be driven at either full off-road height or a lesser 30 mm raised height without the normal 50 kph speed restriction then return to on-road height when conditions are suitable. Raised by 30 mm provides improved ride on rough tracks due to more bump-stop clearance. High speed lowered height provides improved on-road handling without the usual high speed requirement and when used with Access mode it provides improved access for young children and the mobility-impaired.

Land Rover Clip-snap-sack (MWC3136) part for Discovery 1 1989 - 1998 (from Fa393361 To Wa799999) Classic, Freelander 1996 - 2006 Classic, Defender 1987 - 2006, Defender 2007 >

A Solid one-piece output assembly shaft designed for extensive longevity. There is no backlash , no oil leaks and will never wear out. The shaft is designed for all 6 speed Land Rover Defender gearboxes.

Oil Filter, Defender 2

Oil Filter, DEFENDER 2.2LT / 2.4LT

Fits ALL DEFENDERS, DISCOVERY 1 1989 - 1998 and RANGE ROVER CLASSIC. This kit allows the original rear top shock mount to be bolted 50mm lower on the chassis. The mounting bracket is lowered to give greater axle articulation.