MODIFICATION

DEFENDER TD5 DE-CAT PIPE This De-cat pipe for TD5 Defenders will make the vehicle breathe better and also stop excessive heat from the cat coming into the vehicle.

Defender Warning Light Panel Surround - Td5 Designed and developed for fitment around the warning light cluster, it is held in place by self adhesive to the dash binnacle. The component is machined from billet aluminium and has chamfered inner edges and rounded outer edges.

Discovery 2 Auxiliary Transmission Cooler Fits all Discovery 2 Models.

The factory Tie Down point on a Discovery 2 is NOT a recovery point. Thats why at Davis Performance we turned the Factory Tie Down Point into a Heavy Duty Recovery Point. We take a factory Tie Down Point, shape & weld solid steel onto The Tie Down Point. A block of solid steel is also fitted to...

Discovery 3 Auxiliary Transmission Cooler Fits all Discovery 3 Models.

EGR Blanking Plate with bolt cutouts so you can fit in while engine is in vehicle by just loosening the EGR bolts to slide in. !!!IMPORTANT!!! You will need the ECU modded also so the EGR no longer operates and so the check engine lights does not come on the dash.

GENUINE STYLE FOLD-DOWN SIDE STEPS FOR LAND ROVER DEFENDER - CAN BE FITTED TO FRONT OR REAR SIDE DOORS Folding Side Step  for  Land Rover   Defender This part is top quality aftermarket  folding   side step This fold up step is for the  right  or  left  side of the vehicle ( front  or  rear  door) - it will  not suit the rear taildoor Suits  Land Rover   Defender

The Front vented disc kit is designed  to convert your non-vented disc vehicle to a vented disc vehicle.  This improves braking by allowing lower braking temperatures by dissipating heat. Vented rotors are a better option than traditional solid rotors . They dissipate heat better and don't warp or fade as much as solid rotors. They are also good for towing heavy loads.

GTB450 Td5 VNT Turbo Kit - Defender Td5 The result of six years development and testing in the harshest of environments, the GTB450 is the direct fit VNT turbo for the Td5 that works as a VNT turbo should!

GTB450 VNT Turbo Kit - Discovery Td5 The result of six years development and testing in the harshest of environments, the GTB450 is the direct fit VNT turbo for the Discovery Td5 that works as a VNT turbo should!

GTB550 Td5 VNT Turbo Kit - Defender Td5 Like our smaller GTB450, the result of six years development and testing in the harshest of environments, the GTB550 is the direct fit VNT turbo for the Td5 that not only works as a VNT turbo should, but has the capability to unleash massive power and torque!

GTB550 VNT Turbo Kit - Discovery Td5 Like our smaller GTB450, the result of six years development and testing in the harshest of environments, the GTB550 is the direct fit VNT turbo for the Td5 that not only works as a VNT turbo should, but has the capability to unleash massive power and torque!

Defender Heater Vents Sold as a pair. For models after 1989 chassis number FA453192

Heavy Duty Rear Axle Kit - Defender (1999 - 2015) Kit includes two brand new aftermarket axles| new heavy duty drive flanges| flange gaskets| hub seals| lock washers and lock nuts to convert the rear bearings to an adjustable setup.

Consists of:1 x Front Runner Drawer unit (SSDR002)1 x Land Rover All-New Discovery Deck Completion Set2 x Push to Close latch with 2 keys per lock3 x Accessory Channels6 x Eye Nuts for Accessory Channel1 x T Wrench with 1 custom sockets for wheel winderInstallation Hardware including 4 turnbuckles to secure unit to vehicleFitting InstructionMaterials used:Aluminum - Accessory Channels Sub FrameBlack powder coated steel - Drawer Bins FrameCarpet Laminated plywood - Top Deck Deck SetProduct Dimensions:Overall Dimensions:974mm (38.3'') L x 1324mm (52.1'') W x 330mm (13'') HInterior Drawer Dimensions:Left Hand Drawer:914mm (36'') L x 461mm (18.2'') W x 208mm (8.2'') HRight Hand Drawer:914mm (36'') L x 373mm (14.7'') W x 208mm (8.2'') HWeight:82.4kg (181.7lbs)Load Rating:113Kg (250lbs) per DrawerSpecial Notes:Supplied with a T-wrench and custom socket for operating the wheel winder through the drawer system.

Consists of:2x Large light protectors4x Small light protectors12x Self tapping screwsMaterials used:Black plastic-coated high strength steel

Consists of:2x Large light protectors4x Small light protectors12x Self tapping screwsMaterials used:Black plastic-coated high strength steel

Consists of:1x Glass gullwing door assembly1x Outer frame1x Fastening kit2x Gas struts1x Right side inner bracket1x Left sideinner bracket1x Top inner bracket1x Bottom inner bracketMaterials used:6mm Toughened glass with tinted laminateBlack powder-coated high strength steelProduct Dimensions:Overall: L 1120mm (44.1) x W 50mm (2) x H 490mm (19.3)Door Panel: L 1044mm (41.1) x H 414mm (16.3)Weight:15kg (33.1lbs) Glass specifications: Visible Light:Transmission: 44Reflection Outside: 5 Solar Energy:Total Elimination: 38Reflection Outside: 5Absorption 1: 47Direct Transmission: 47SHGC: 0.62 Shading Coefficient:Ratio: 0.71 U Value:(W/m2).K (Center of Glass): 5.8

N/D

Consists of:1x Under console safe2x Keys supplied Materials used:Black powder-coated mild steelCarpeted base Product Dimensions:433mm (17.1'') L x 275mm (10.8'') W x H 100mm (3.9'') Internal Dimensions:375mm (14.8'') L x 265mm W (10.4'') (Raised section)/205mm (8.1'') W (Lower Section) x 107mm (4.2'') H Weight:3.2kg (7.1lbs)

Coming Soon!