MODIFICATION

Materials used: BPA-free polyethyleneDimensions (mm): Slanted from 560W to 380W x 270H x 310L

Materials used: BPA-free polyethyleneDimensions (mm): Slanted from 560W to 370W x 320H x 315L

BPLD017 - Land Rover Defender 90/110 (1983-2016) Fender Protector / Black - by Front Runner Consisting of: Material Used: Black epoxy powder - coated T6 aluminium Approximate Installed Weight: 2.2kg (4.85lbs) Shipping Dimensions: Width: 380mm (15'') Length: 1130mm (44'') Height: 35mm (1'') Shipping Weight: Weight: 2.2kg (5lbs)

Consists of:1 x Base Drawer unit with 1 Drawer1 x Deck Completion Set1 x Push to close latch with 2 keys2 x Drawer specific Drawer DividersInstallation HardwareFitting Instruction Materials used:Aluminum - Sub FrameBlack powder coated steel - Drawer Bins, Drawer Dividers FrameCarpet Laminated plywood - Top Deck Product Dimensions:1095mm (43.1'') L x 1136mm (44.7'') W x 219mm (8.6'') H Internal Drawer Dimensions:1000mm (39.4'') L x 650mm (25.6'') W x 164mm (6.5'') H Weight:72kg (158.7lbs) Load Rating:150Kg (330lbs) Special Notes:Items can be secured to the top deck with screws or drilled and bolted through.

Consists of:1 x Base Drawer unit with 1 Drawer1 x Push to close latch with 2 keys2 x Drawer specific Drawer DividersInstallation hardwareFitting InstructionMaterials used:Aluminum - Sub FrameBlack powder coated steel - Drawer Bins, Drawer Dividers FrameCarpet Laminated plywood - Top DeckProduct Dimensions:1110mm (43.7'') L x 910mm (35.8'') W x 215mm (8.5'') HInternal Drawer Dimensions:1000mm (39.4'') L x 650mm (25.6'') W x 164mm (6.5'') HWeight:60.4Kg (133.2lbs)Load Rating: 150Kg (330lbs)Special Notes:Items can be secured to the top deck with screws or drilled and bolted through.

Consists of:1x Fastening Kit2x Pinch Welds2x Side Panels - 1 Left, 1 Right2x Mounting Brackets1x Top Panel2x Wooden Back Board1x Bottom PanelMaterials used:Black powder coated steelBack Board: Stained PlywoodProduct dimensions:860mm (33.9'') W x 310mm (12.2'') L x 654mm (25.8'') H (Box)860mm (33.9'') W x 310mm (12.2'') L x 746mm (29.4'') H (Overall incl. Brackets)Weight:13.1kg (28.9lbs)

Consists of:1x Mild steel wood Shelf1x Installation Kit Material used:Shelf: Stained PlywoodShelf Support: Black powder-coated mild steel Product dimensions:264mm (10.4'') L x 856mm (33.7'') W x 36mm (1.4'') H Weight:3.8kg (8.4lbs)

The edge of the Defender seat box is prone to damage, protect that edge and smarten up your interior with these protectors. Made from 2mm stainless steel and CNC cut for accuracy. Less than 5 minutes to fit and all you need is a drill for the fixings. Kit includes a pair of corner protectors and steel self drill fixings.

The edge of the Defender seat box is prone to damage, protect that edge and smarten up your interior with these protectors. Made from 2mm stainless steel and CNC cut for accuracy. Less than 5 minutes to fit and all you need is a drill for the fixings. Kit includes a pair of corner protectors and steel self drill fixings. These will also fit a Series 2 & 3 but will require matching drilling to accommodate seat rail fixing.

Consists of:1 x Spare StrapMaterials used:Black powder coated high strength steelProduct Dimensions:385mm (15.2'') L x 38mm (1.5'') W x 112mm (4.4'') HWeight:318g (11.2oz)

Consists of: 1x Fastening Kit 2x Pinch Welds2x Side Panels - 1 Left, 1 Right2x Mounting Brackets1x Top Panel2x Wooden Back Panels1x Bottom Panel Materials used: Black powder-coated mild steel Product Dimensions: L 255mm (10)x W 1000mm (39.4)x H 654mm (25.8) Weight: 13.1kg (28.9lbs)

Consists of:1x Wooden shelf1x Mild steel frame1x Fastening Kit   Material used:Shelf: Stained PlywoodFrame: Black powder-coated mild steel   Product dimensions:209mm (8.2'') L x 997mm (39.3'') W x 36mm (1.4'') H   Weight:3.8kg (8.4lbs)

Land Rover Defender / Discovery 1 HD Maxi-Drive Flange Set Land Rover HD MaxiDrive Probally one of the best HD Drive Flangers On The Market Today. Price is Per Pair Suits All Defender Front And Rear on Standard Axles.  To suit: Land Rover Defenders 1994 Onwards With Disk Brakes All Round Land Rover Discovery 1

Fits ALL DEFENDERS, DISCOVERY 1 1989 - 1998 and RANGE ROVER CLASSIC. Increase the body clearance to allow the fitment of really big tyres as well as provide an additional 50mm of lift to your suspension. These simple spacers bolt between the coil spring and the axle and can be the perfect way to lift the vehicle to the desired ride height when the load or equipment carried exceeds even the heaviest rated coil springs.

Consists of:1 x Assembled ladder1 x Z-bracketBolt kitMaterials used:304 Stainless steelElectroplated and black powder coatedWeight:4kg (8.8lbs)

For Discovery 2’s with rear air suspension this simple kit will increase ground clearance and tyre to body clearance. If the rear air springs are to be retained to maintain the self-levelling facility these spacer kits are the perfect solution for achieving a 50mm lift. The front kit compliments the rear perfectly.

Consists of:1 x Front Runner Drawer unit (SSDR002)1 x Land Rover Discovery LR3 LR4 Drawer Deck Completion Set2 x Push to Close latch with 2 keys per lock3 x Accessory Channels6 x Eye Nuts for Accessory Channel1 x T Wrench with 2 custom sockets for wheel winderInstallation Hardware including 4 turnbuckles to secure unit to vehicleFitting InstructionMaterials used:Aluminum - Accessory Channels Sub FrameBlack powder coated steel - Drawer Bins FrameCarpet Laminated plywood - Top Deck Deck SetProduct Dimensions:Closed:972mm (38.3) L x 1230mm (48.4) W x 328mm (12.9) HOpen:1896mm (74.7) L x 1230mm (48.4) W x 328mm (12.9) HInterior Drawer Dimensions:Left Hand Drawer:914mm (36) L x 461mm (18.2) W x 208mm (8.2) HRight Hand Drawer:914mm (36) L x 373mm (14.7) W x 208mm (8.2) HWeight:80.3Kg (177lbs)Load Rating:113Kg (250lbs) per DrawerSpecial Notes:Supplied with a T-wrench and 2 custom sockets for operating the wheel winder through the drawer system.

Consists of:1 x Sump Guard4 x Rubber Spacer2 x Aluminium Spacers2 x Mounting BracketsMaterials used:Plate: 6mm AluminiumBracket: Black powder coated 8mm high strength steelProduct Dimensions:735mm (29'') L x 750mm (29.5'') WWeight:8kg (17.6lbs)

Consists of:1 x Drawer base unit (SSDR003)1 x Land Rover Discovery Sport Deck Completion Set2 x Push to close latch with 2 keys per lock 3 x Accessory channels6 x Eye Nuts for accessory channelsInstallation HardwareFitting InstructionMaterials used:Aluminum - Accessory Channels Sub FrameBlack powder coated steel - Drawer Bins FrameUV resistant nylon Carpet Laminated Plywood - Top Deck Side DeckProduct Dimensions:857mm (33.7) L x 1215mm (47.8) W x 331mm (13) HInterior Drawer Dimensions:Left Hand Drawer:717mm (28.2) L x 348mm (13.7) W x 210mm (8.3) HRight Hand Drawer:717mm (28.2) L x 448mm (17.6) W x 210mm (8.3) HWeight:72.42kg (159.7lbs)Load Rating:113Kg (250lbs) per DrawerSpecial Notes:3 Drawer Dividers (SSCA048) can fit each Drawer

Consists of:1 x Cargo Slide1 x Cargo Slide MountInstallation HardwareFitting Instruction Materials used:Black powder coated steel Product Dimensions:851mm (33.5'') L x 1087mm (42.8'') W x 170mm (6.7'') H Internal Drawer Dimensions:778mm (30.6'') L x 780mm (30.7'') W x 60mm (2.4'') H Weight:39.19kg (86.4lbs) Load Rating:113kg (250lbs)

Consists of:1 x Base Drawer unit (SSDR011)1 x Land Rover Deck Completion Set (1 Left hand side 1 Right hand side)1 x Set of Front Covers (1 Left hand side 1 Right hand side)1 x Push to close latch with 2 keys2 x Accessory channels4 x Eye Nuts for accessory channelInstallation HardwareFitting Instruction Materials used:Aluminum - Accessory Channels Sub FrameBlack powder coated steel - Drawer Bins, Frame Front CoversCarpet Laminated plywood - Top Deck, Side Rear Deck Product Dimensions:625mm (24.6'') L x 1197mm (47.1'') W x 269mm (10.6'') H Weight37.3kg (82.2lbs)  

The system modifies the height sensor signals, offsetting each of the 4 valves to cause the suspension module to believe that the vehicle is lower or higher than it really is & therefore adjust the air volume in the air springs until the modified sensor signals are as expected for the target height. The system does not communicate with nor modify the suspension module, thereby retaining unaltered all original plausibility and control checks.

RANGE ROVER ELECTRONIC HEIGHT CONTROL KIT The Llams electronic air suspension height controller allows selection of off-road and high-speed   heights at any speed.

RANGE ROVER SPORT ELECTRONIC HEIGHT CONTROL KIT The Llams electronic air suspension height controller allows selection of off-road and high-speed   heights at any speed.

The system modifies the height sensor signals, offsetting each of the 4 valves to cause the suspension module to believe that the vehicle is lower or higher than it really is & therefore adjust the air volume in the air springs until the modified sensor signals are as expected for the target height. The system does not communicate with nor modify the suspension module, thereby retaining unaltered all original plausibility and control checks.

The Llams electronic air suspension height controller allows selection of off-road and high-speed   heights at any speed.   Sand, tracks and high-crown outback roads can now be driven at either full off-road height or a lesser 30 mm raised height without the normal 50 kph speed restriction then return to on-road height when conditions are suitable. Raised by 30 mm provides improved ride on rough tracks due to more bump-stop clearance. High speed lowered height provides improved on-road handling without the usual high speed requirement and when used with Access mode it provides improved access for young children and the mobility-impaired.

The Llams electronic air suspension height controller allows selection of off-road and high-speed   heights at any speed.   Sand, tracks and high-crown outback roads can now be driven at either full off-road height or a lesser 30 mm raised height without the normal 50 kph speed restriction then return to on-road height when conditions are suitable. Raised by 30 mm provides improved ride on rough tracks due to more bump-stop clearance. High speed lowered height provides improved on-road handling without the usual high speed requirement and when used with Access mode it provides improved access for young children and the mobility-impaired.

DISCOVERY 5 ELECTRONIC HEIGHT CONTROL KIT The Llams electronic air suspension height controller allows selection of off-road and high-speed   heights at any speed.

The Llams electronic air suspension height controller allows selection of off-road and high-speed   heights at any speed.   Sand, tracks and high-crown outback roads can now be driven at either full off-road height or a lesser 30 mm raised height without the normal 50 kph speed restriction then return to on-road height when conditions are suitable. Raised by 30 mm provides improved ride on rough tracks due to more bump-stop clearance. High speed lowered height provides improved on-road handling without the usual high speed requirement and when used with Access mode it provides improved access for young children and the mobility-impaired.

The Llams electronic air suspension height controller allows selection of off-road and high-speed   heights at any speed.   Sand, tracks and high-crown outback roads can now be driven at either full off-road height or a lesser 30 mm raised height without the normal 50 kph speed restriction then return to on-road height when conditions are suitable. Raised by 30 mm provides improved ride on rough tracks due to more bump-stop clearance. High speed lowered height provides improved on-road handling without the usual high speed requirement and when used with Access mode it provides improved access for young children and the mobility-impaired.

The Llams electronic air suspension height controller allows selection of off-road and high-speed   heights at any speed.   Sand, tracks and high-crown outback roads can now be driven at either full off-road height or a lesser 30 mm raised height without the normal 50 kph speed restriction then return to on-road height when conditions are suitable. Raised by 30 mm provides improved ride on rough tracks due to more bump-stop clearance. High speed lowered height provides improved on-road handling without the usual high speed requirement and when used with Access mode it provides improved access for young children and the mobility-impaired.

The Llams electronic air suspension height controller allows selection of off-road and high-speed   heights at any speed.   Sand, tracks and high-crown outback roads can now be driven at either full off-road height or a lesser 30 mm raised height without the normal 50 kph speed restriction then return to on-road height when conditions are suitable. Raised by 30 mm provides improved ride on rough tracks due to more bump-stop clearance. High speed lowered height provides improved on-road handling without the usual high speed requirement and when used with Access mode it provides improved access for young children and the mobility-impaired.

The Llams electronic air suspension height controller allows selection of off-road and high-speed   heights at any speed.   Sand, tracks and high-crown outback roads can now be driven at either full off-road height or a lesser 30 mm raised height without the normal 50 kph speed restriction then return to on-road height when conditions are suitable. Raised by 30 mm provides improved ride on rough tracks due to more bump-stop clearance. High speed lowered height provides improved on-road handling without the usual high speed requirement and when used with Access mode it provides improved access for young children and the mobility-impaired.

Fits ALL DEFENDERS, DISCOVERY 1 1989 - 1998 and RANGE ROVER CLASSIC. This kit allows the original rear top shock mount to be bolted 50mm lower on the chassis. The mounting bracket is lowered to give greater axle articulation.

POWER CLUTCH MASTER CYLINDER This master can be fitted to all Defenders and Series 3 Land Rovers. This can also be fitted with the Power Spring for best results. This master cylinder creates a 30% lighter pedal than a standard fitted one.

The POWER PEDAL SPRING is 45% stronger and lighter than the Land Rover over-centre spring as fitted to the TDi vehicles. 45% lighter than OEM pedal assist spring. 80% lighter than no spring at all when retro fitted to TD5 / 300TDi Defender.

POWER SPEC TD5 SOLID MASS FLYWHEEL KIT The power spec is ideal if you use your Land Rover as a work horse. If you want reliability and drivability from your mapped upgraded motor and turbo. When your clutch needs replacing you won't need to replace the flywheel.

R380 Gear and Transfer Knob Set - Defender

Plug and Play No need for Adaptation Designed for MY 2001…2009 (BMW ideology). Plug & Play. Manages bus wakeup, key presence monitoring and key turn enable according to EWS status. 12-pin connector: plugs directly into original connector, pin1 is marked on opposite side of board. Wire to 1st pin is usually BLUE in original car wiring loom. Emulator is reusable (not locked to car).

RECOVERY DEFENDER NAS STYLE REAR STEP WITH BLACK CHEQUER PLATE ALL DEFENDER 90, 110, 130 – 1998 – 2016 Supplied with all the different bracing bars, for each variation included in every box. **NOTE – NOT ADR APPROVED FOR TOWING**

Rubber rocker cover gasket. Will fit 10P Engine.

Rubber rocker cover gasket. Will fit 15P Engine.

Sealing washers for TD5 gasket. Used on both 10P and 15P engines. 13 Needed for complete set.

These are designed to extend the front seat rails by 2” back which adds more leg room & comfort for the taller Defender Driver.

Ideal for the taller driver to give a more practical and comfortable driving position! > Give your Defender seats 3″ of extra slide with a pair of these seat rails. > One pair of rails is suitable for one seat.

The Eaton TVS supercharger fitted to 5.0 Range Rover Rover models is an excellent compressor, which can be easily upgraded by changing the pulley.  This increases the driven speed of the supercharger, which in turn increasing boost pressure by about 2.5psi, and allowing the engine to produce more power without the strain of revving higher.

The standard Defender Td5 is a great car, but can feel lethargic and be somewhat frustrating when it doesn't deliver the power you'd expect. With an DPL remap we make your Defender feel brighter and more responsive, delivering the power exactly where you need it, and with our socially acceptable tuning, without any nasty smoke!

Enhance the performance of your Td5 engine by replacing the restricting inlet manifold with this kit. The kit comes complete with a new intercooler hose fitting, gasket, bolts and plate.