MODIFICATION

EGR Blanking Plate with bolt cutouts so you can fit in while engine is in vehicle by just loosening the EGR bolts to slide in. !!!IMPORTANT!!! You will need the ECU modded also so the EGR no longer operates and so the check engine lights does not come on the dash.

DEFENDER 110 Lowered Height Comfort Kit After many years and thousands of pounds worth of development, Alive Tuning's comfort springs take away the harshness felt from imperfections of the road surface, providing a smooth ride and also improving the handling of the vehicle greatly, especially with our Uprated Rear Anti Roll bar and Bilstein B6 or Fox 2.0 dampers.

Consists of:1 x Assembled ladder1 x Z-bracketBolt kitMaterials used:304 Stainless steelElectroplated and black powder coatedWeight:4kg (8.8lbs)

The Llams electronic air suspension height controller allows selection of off-road and high-speed   heights at any speed.   Sand, tracks and high-crown outback roads can now be driven at either full off-road height or a lesser 30 mm raised height without the normal 50 kph speed restriction then return to on-road height when conditions are suitable. Raised by 30 mm provides improved ride on rough tracks due to more bump-stop clearance. High speed lowered height provides improved on-road handling without the usual high speed requirement and when used with Access mode it provides improved access for young children and the mobility-impaired.

2 x EGR Blanking Plates with bolt cutouts so you can fit in while engine is in vehicle by just loosening the EGR bolts to slide in. !!!IMPORTANT!!! You will need the ECU modded also so the EGR no longer operates and so the check engine lights does not come on the dash.

Fits all Defender Models Bilstein Australia have developed an easy bolt-in steering damper for users wanting the extra benefits for a vehicle that is used on the road as well as off it. Helps prevent steering shake over rough surfaces.

Materials used: BPA-free polyethyleneDimensions (mm): Slanted from 560W to 380W x 270H x 310L

N/D

Consists of:1 x Cargo Slide1 x Cargo Slide MountInstallation HardwareFitting Instruction Materials used:Black powder coated steel Product Dimensions:851mm (33.5'') L x 1087mm (42.8'') W x 170mm (6.7'') H Internal Drawer Dimensions:778mm (30.6'') L x 780mm (30.7'') W x 60mm (2.4'') H Weight:39.19kg (86.4lbs) Load Rating:113kg (250lbs)

Land Rover Defender / Discovery 1 HD Maxi-Drive Flange Set Land Rover HD MaxiDrive Probally one of the best HD Drive Flangers On The Market Today. Price is Per Pair Suits All Defender Front And Rear on Standard Axles.  To suit: Land Rover Defenders 1994 Onwards With Disk Brakes All Round Land Rover Discovery 1

GENUINE STYLE FOLD-DOWN SIDE STEPS FOR LAND ROVER DEFENDER - CAN BE FITTED TO FRONT OR REAR SIDE DOORS Folding Side Step  for  Land Rover   Defender This part is top quality aftermarket  folding   side step This fold up step is for the  right  or  left  side of the vehicle ( front  or  rear  door) - it will  not suit the rear taildoor Suits  Land Rover   Defender

The system modifies the height sensor signals, offsetting each of the 4 valves to cause the suspension module to believe that the vehicle is lower or higher than it really is & therefore adjust the air volume in the air springs until the modified sensor signals are as expected for the target height. The system does not communicate with nor modify the suspension module, thereby retaining unaltered all original plausibility and control checks.

Consists of: 2x Large light protectors4x Small light protectors12x Self tapping screwsMaterials used:Black plastic-coated high strength steelWeight:1.1kg (2.4lbs)

DEFENDER 110 Standard Height Comfort Kit After many years and thousands of pounds worth of development, Alive Tuning's comfort springs take away the harshness felt from imperfections of the road surface, providing a smooth ride and also improving the handling of the vehicle greatly, especially with our Uprated Rear Anti Roll bar and Bilstein B6 or Fox 2.0 dampers.

Coming Soon!

Rubber rocker cover gasket. Will fit 15P Engine.

DEFENDER 90 Lowered Height Comfort Kit After many years and thousands of pounds worth of development, Alive Tuning's comfort springs take away the harshness felt from imperfections of the road surface, providing a smooth ride and also improving the handling of the vehicle greatly, especially with our Uprated Rear Anti Roll bar and Bilstein B6 or Fox 2.0 dampers.

Consists of:1 x Spare StrapMaterials used:Black powder coated high strength steelProduct Dimensions:385mm (15.2'') L x 38mm (1.5'') W x 112mm (4.4'') HWeight:318g (11.2oz)

Defender - Door Closing Handles Polished Finish (Pair) This product offers a quality appearance to the interior of your vehicle, the handles are machined with great detail.

BPLD017 - Land Rover Defender 90/110 (1983-2016) Fender Protector / Black - by Front Runner Consisting of: Material Used: Black epoxy powder - coated T6 aluminium Approximate Installed Weight: 2.2kg (4.85lbs) Shipping Dimensions: Width: 380mm (15'') Length: 1130mm (44'') Height: 35mm (1'') Shipping Weight: Weight: 2.2kg (5lbs)

The Llams electronic air suspension height controller allows selection of off-road and high-speed   heights at any speed.   Sand, tracks and high-crown outback roads can now be driven at either full off-road height or a lesser 30 mm raised height without the normal 50 kph speed restriction then return to on-road height when conditions are suitable. Raised by 30 mm provides improved ride on rough tracks due to more bump-stop clearance. High speed lowered height provides improved on-road handling without the usual high speed requirement and when used with Access mode it provides improved access for young children and the mobility-impaired.