MODIFICATION

DEFENDER TD5 DE-CAT PIPE This De-cat pipe for TD5 Defenders will make the vehicle breathe better and also stop excessive heat from the cat coming into the vehicle.

DEFENDER 2.4 DE-CAT PIPE This De-cat pipe for 2.4 Defenders will make the vehicle breathe better and also stop excessive heat from the cat coming into the vehicle.

Land Rover Defender / Discovery 1 HD Maxi-Drive Flange Set Land Rover HD MaxiDrive Probally one of the best HD Drive Flangers On The Market Today. Price is Per Pair Suits All Defender Front And Rear on Standard Axles.  To suit: Land Rover Defenders 1994 Onwards With Disk Brakes All Round Land Rover Discovery 1

Defender Heater Vents Sold as a pair. For models after 1989 chassis number FA453192

Terrafirma black powder coated Defender 90 rear bumper corners. This has been available for sale from Terrafirma 4x4 for over 10 years and has had ZERO warranty cases in the last 12 months. Fits ALL DEFENDERS. Protect the rear of your 90 with these excellent corner bumpers

When tackling a ledge or attacking steep descent’s, you always run the risk of damaging your Defender's rear end, especially on the 110 wheel base. The Bumperette's act as corner protectors, protecting both the vehicle's body & tail lights while also providing a step For roof top access.  

NOTE: Please advise in the comments section when ordering if vehicle is Defender or Discovery 2 to recieve the correct fitting kit. NOTE: YOUR ORIGINAL CENTRIFUGE DRAIN PIPE REQUIRED BACK FOR EXCHANGE. The Provent system is designed to stop crank case oil vapour recycling back...

The factory Tie Down point on a Discovery 2 is NOT a recovery point. Thats why at Davis Performance we turned the Factory Tie Down Point into a Heavy Duty Recovery Point. We take a factory Tie Down Point, shape & weld solid steel onto The Tie Down Point. A block of solid steel is also fitted to...

Consists of:1 x Sump Guard4 x Rubber Spacer2 x Aluminium Spacers2 x Mounting BracketsMaterials used:Plate: 6mm AluminiumBracket: Black powder coated 8mm high strength steelProduct Dimensions:735mm (29'') L x 750mm (29.5'') WWeight:8kg (17.6lbs)

Consists of:1x Fastening Kit2x Pinch Welds2x Side Panels - 1 Left, 1 Right2x Mounting Brackets1x Top Panel2x Wooden Back Board1x Bottom PanelMaterials used:Black powder coated steelBack Board: Stained PlywoodProduct dimensions:860mm (33.9'') W x 310mm (12.2'') L x 654mm (25.8'') H (Box)860mm (33.9'') W x 310mm (12.2'') L x 746mm (29.4'') H (Overall incl. Brackets)Weight:13.1kg (28.9lbs)

Consists of: 1x Fastening Kit 2x Pinch Welds2x Side Panels - 1 Left, 1 Right2x Mounting Brackets1x Top Panel2x Wooden Back Panels1x Bottom Panel Materials used: Black powder-coated mild steel Product Dimensions: L 255mm (10)x W 1000mm (39.4)x H 654mm (25.8) Weight: 13.1kg (28.9lbs)

DEFENDER 2.2 DE-CAT PIPE This De-cat pipe for 2.2 Defenders will make the vehicle breathe better and also stop excessive heat from the cat coming into the vehicle.

Defender - Door Opening Handle Assembly Designed and manufactured with precision these are a direct replacement for the plastic originals. The opening handle is machined from billet aluminium and has intricate detail machined into it with rounded edges and curved contours giving a true quality appearance to the door of your vehicle.

The Eaton TVS supercharger fitted to 5.0 Range Rover Rover models is an excellent compressor, which can be easily upgraded by changing the pulley.  This increases the driven speed of the supercharger, which in turn increasing boost pressure by about 2.5psi, and allowing the engine to produce more power without the strain of revving higher.

Consists of:1 x Assembled ladder1 x Z-bracketBolt kitMaterials used:304 Stainless steelElectroplated and black powder coatedWeight:4kg (8.8lbs)

Materials used: BPA-free polyethyleneDimensions (mm): Slanted from 560W to 380W x 270H x 310L

Materials used: BPA-free polyethyleneDimensions (mm): Slanted from 560W to 370W x 320H x 315L

The Llams electronic air suspension height controller allows selection of off-road and high-speed   heights at any speed.   Sand, tracks and high-crown outback roads can now be driven at either full off-road height or a lesser 30 mm raised height without the normal 50 kph speed restriction then return to on-road height when conditions are suitable. Raised by 30 mm provides improved ride on rough tracks due to more bump-stop clearance. High speed lowered height provides improved on-road handling without the usual high speed requirement and when used with Access mode it provides improved access for young children and the mobility-impaired.

The Llams electronic air suspension height controller allows selection of off-road and high-speed   heights at any speed.   Sand, tracks and high-crown outback roads can now be driven at either full off-road height or a lesser 30 mm raised height without the normal 50 kph speed restriction then return to on-road height when conditions are suitable. Raised by 30 mm provides improved ride on rough tracks due to more bump-stop clearance. High speed lowered height provides improved on-road handling without the usual high speed requirement and when used with Access mode it provides improved access for young children and the mobility-impaired.

The Llams electronic air suspension height controller allows selection of off-road and high-speed   heights at any speed.   Sand, tracks and high-crown outback roads can now be driven at either full off-road height or a lesser 30 mm raised height without the normal 50 kph speed restriction then return to on-road height when conditions are suitable. Raised by 30 mm provides improved ride on rough tracks due to more bump-stop clearance. High speed lowered height provides improved on-road handling without the usual high speed requirement and when used with Access mode it provides improved access for young children and the mobility-impaired.

The Llams electronic air suspension height controller allows selection of off-road and high-speed   heights at any speed.   Sand, tracks and high-crown outback roads can now be driven at either full off-road height or a lesser 30 mm raised height without the normal 50 kph speed restriction then return to on-road height when conditions are suitable. Raised by 30 mm provides improved ride on rough tracks due to more bump-stop clearance. High speed lowered height provides improved on-road handling without the usual high speed requirement and when used with Access mode it provides improved access for young children and the mobility-impaired.