MODIFICATION

DEFENDER 2.4 DE-CAT PIPE This De-cat pipe for 2.4 Defenders will make the vehicle breathe better and also stop excessive heat from the cat coming into the vehicle.

DEFENDER TD5 DE-CAT PIPE This De-cat pipe for TD5 Defenders will make the vehicle breathe better and also stop excessive heat from the cat coming into the vehicle.

Rubber rocker cover gasket. Will fit 10P Engine.

Rubber rocker cover gasket. Will fit 15P Engine.

Sealing washers for TD5 gasket. Used on both 10P and 15P engines. 13 Needed for complete set.

The edge of the Defender seat box is prone to damage, protect that edge and smarten up your interior with these protectors. Made from 2mm stainless steel and CNC cut for accuracy. Less than 5 minutes to fit and all you need is a drill for the fixings. Kit includes a pair of corner protectors and steel self drill fixings. These will also fit a Series 2 & 3 but will require matching drilling to accommodate seat rail fixing.

The edge of the Defender seat box is prone to damage, protect that edge and smarten up your interior with these protectors. Made from 2mm stainless steel and CNC cut for accuracy. Less than 5 minutes to fit and all you need is a drill for the fixings. Kit includes a pair of corner protectors and steel self drill fixings.

GTB550 Td5 VNT Turbo Kit - Defender Td5 Like our smaller GTB450, the result of six years development and testing in the harshest of environments, the GTB550 is the direct fit VNT turbo for the Td5 that not only works as a VNT turbo should, but has the capability to unleash massive power and torque!

GTB450 Td5 VNT Turbo Kit - Defender Td5 The result of six years development and testing in the harshest of environments, the GTB450 is the direct fit VNT turbo for the Td5 that works as a VNT turbo should!

GTB550 VNT Turbo Kit - Discovery Td5 Like our smaller GTB450, the result of six years development and testing in the harshest of environments, the GTB550 is the direct fit VNT turbo for the Td5 that not only works as a VNT turbo should, but has the capability to unleash massive power and torque!

GTB450 VNT Turbo Kit - Discovery Td5 The result of six years development and testing in the harshest of environments, the GTB450 is the direct fit VNT turbo for the Discovery Td5 that works as a VNT turbo should!

DEFENDER 2.2 DE-CAT PIPE This De-cat pipe for 2.2 Defenders will make the vehicle breathe better and also stop excessive heat from the cat coming into the vehicle.

POWER SPEC TD5 SOLID MASS FLYWHEEL KIT The power spec is ideal if you use your Land Rover as a work horse. If you want reliability and drivability from your mapped upgraded motor and turbo. When your clutch needs replacing you won't need to replace the flywheel.

POWER CLUTCH MASTER CYLINDER This master can be fitted to all Defenders and Series 3 Land Rovers. This can also be fitted with the Power Spring for best results. This master cylinder creates a 30% lighter pedal than a standard fitted one.

The POWER PEDAL SPRING is 45% stronger and lighter than the Land Rover over-centre spring as fitted to the TDi vehicles. 45% lighter than OEM pedal assist spring. 80% lighter than no spring at all when retro fitted to TD5 / 300TDi Defender.

The Llams electronic air suspension height controller allows selection of off-road and high-speed   heights at any speed.   Sand, tracks and high-crown outback roads can now be driven at either full off-road height or a lesser 30 mm raised height without the normal 50 kph speed restriction then return to on-road height when conditions are suitable. Raised by 30 mm provides improved ride on rough tracks due to more bump-stop clearance. High speed lowered height provides improved on-road handling without the usual high speed requirement and when used with Access mode it provides improved access for young children and the mobility-impaired.

Consists of:1x Wooden shelf1x Mild steel frame1x Fastening Kit   Material used:Shelf: Stained PlywoodFrame: Black powder-coated mild steel   Product dimensions:209mm (8.2'') L x 997mm (39.3'') W x 36mm (1.4'') H   Weight:3.8kg (8.4lbs)

Consists of: 1x Fastening Kit 2x Pinch Welds2x Side Panels - 1 Left, 1 Right2x Mounting Brackets1x Top Panel2x Wooden Back Panels1x Bottom Panel Materials used: Black powder-coated mild steel Product Dimensions: L 255mm (10)x W 1000mm (39.4)x H 654mm (25.8) Weight: 13.1kg (28.9lbs)

Consists of:1x Mild steel wood Shelf1x Installation Kit Material used:Shelf: Stained PlywoodShelf Support: Black powder-coated mild steel Product dimensions:264mm (10.4'') L x 856mm (33.7'') W x 36mm (1.4'') H Weight:3.8kg (8.4lbs)

Consists of:1x Fastening Kit2x Pinch Welds2x Side Panels - 1 Left, 1 Right2x Mounting Brackets1x Top Panel2x Wooden Back Board1x Bottom PanelMaterials used:Black powder coated steelBack Board: Stained PlywoodProduct dimensions:860mm (33.9'') W x 310mm (12.2'') L x 654mm (25.8'') H (Box)860mm (33.9'') W x 310mm (12.2'') L x 746mm (29.4'') H (Overall incl. Brackets)Weight:13.1kg (28.9lbs)

Consists of:1 x Spare StrapMaterials used:Black powder coated high strength steelProduct Dimensions:385mm (15.2'') L x 38mm (1.5'') W x 112mm (4.4'') HWeight:318g (11.2oz)