MODIFICATION

Consists of:1 x Base Drawer unit (SSDR011)1 x Land Rover Deck Completion Set (1 Left hand side 1 Right hand side)1 x Set of Front Covers (1 Left hand side 1 Right hand side)1 x Push to close latch with 2 keys2 x Accessory channels4 x Eye Nuts for accessory channelInstallation HardwareFitting Instruction Materials used:Aluminum - Accessory Channels Sub FrameBlack powder coated steel - Drawer Bins, Frame Front CoversCarpet Laminated plywood - Top Deck, Side Rear Deck Product Dimensions:625mm (24.6'') L x 1197mm (47.1'') W x 269mm (10.6'') H Weight37.3kg (82.2lbs)  

POWER CLUTCH MASTER CYLINDER This master can be fitted to all Defenders and Series 3 Land Rovers. This can also be fitted with the Power Spring for best results. This master cylinder creates a 30% lighter pedal than a standard fitted one.

Rubber rocker cover gasket. Will fit 10P Engine.

DEFENDER 90 Standard Height Comfort Kit After many years and thousands of pounds worth of development, Alive Tuning's comfort springs take away the harshness felt from imperfections of the road surface, providing a smooth ride and also improving the handling of the vehicle greatly, especially with our Uprated Rear Anti Roll bar and Bilstein B6 or Fox 2.0 dampers.

RECOVERY DEFENDER NAS STYLE REAR STEP WITH BLACK CHEQUER PLATE ALL DEFENDER 90, 110, 130 – 1998 – 2016 Supplied with all the different bracing bars, for each variation included in every box. **NOTE – NOT ADR APPROVED FOR TOWING**

Defender - Door Locking Pegs (Pair)

Plug and Play No need for Adaptation Designed for MY 2001…2009 (BMW ideology). Plug & Play. Manages bus wakeup, key presence monitoring and key turn enable according to EWS status. 12-pin connector: plugs directly into original connector, pin1 is marked on opposite side of board. Wire to 1st pin is usually BLUE in original car wiring loom. Emulator is reusable (not locked to car).

Consists of:1 x Base Drawer unit with 1 Drawer1 x Push to close latch with 2 keys2 x Drawer specific Drawer DividersInstallation hardwareFitting InstructionMaterials used:Aluminum - Sub FrameBlack powder coated steel - Drawer Bins, Drawer Dividers FrameCarpet Laminated plywood - Top DeckProduct Dimensions:1110mm (43.7'') L x 910mm (35.8'') W x 215mm (8.5'') HInternal Drawer Dimensions:1000mm (39.4'') L x 650mm (25.6'') W x 164mm (6.5'') HWeight:60.4Kg (133.2lbs)Load Rating: 150Kg (330lbs)Special Notes:Items can be secured to the top deck with screws or drilled and bolted through.

The Llams electronic air suspension height controller allows selection of off-road and high-speed   heights at any speed.   Sand, tracks and high-crown outback roads can now be driven at either full off-road height or a lesser 30 mm raised height without the normal 50 kph speed restriction then return to on-road height when conditions are suitable. Raised by 30 mm provides improved ride on rough tracks due to more bump-stop clearance. High speed lowered height provides improved on-road handling without the usual high speed requirement and when used with Access mode it provides improved access for young children and the mobility-impaired.

Consists of:1 x Front Runner Drawer unit (SSDR002)1 x Land Rover Discovery LR3 LR4 Drawer Deck Completion Set2 x Push to Close latch with 2 keys per lock3 x Accessory Channels6 x Eye Nuts for Accessory Channel1 x T Wrench with 2 custom sockets for wheel winderInstallation Hardware including 4 turnbuckles to secure unit to vehicleFitting InstructionMaterials used:Aluminum - Accessory Channels Sub FrameBlack powder coated steel - Drawer Bins FrameCarpet Laminated plywood - Top Deck Deck SetProduct Dimensions:Closed:972mm (38.3) L x 1230mm (48.4) W x 328mm (12.9) HOpen:1896mm (74.7) L x 1230mm (48.4) W x 328mm (12.9) HInterior Drawer Dimensions:Left Hand Drawer:914mm (36) L x 461mm (18.2) W x 208mm (8.2) HRight Hand Drawer:914mm (36) L x 373mm (14.7) W x 208mm (8.2) HWeight:80.3Kg (177lbs)Load Rating:113Kg (250lbs) per DrawerSpecial Notes:Supplied with a T-wrench and 2 custom sockets for operating the wheel winder through the drawer system.

Materials used: BPA-free polyethyleneDimensions (mm): Slanted from 560W to 370W x 320H x 315L

Consists of:1 x Front Runner Drawer unit (SSDR002)1 x Land Rover All-New Discovery Deck Completion Set2 x Push to Close latch with 2 keys per lock3 x Accessory Channels6 x Eye Nuts for Accessory Channel1 x T Wrench with 1 custom sockets for wheel winderInstallation Hardware including 4 turnbuckles to secure unit to vehicleFitting InstructionMaterials used:Aluminum - Accessory Channels Sub FrameBlack powder coated steel - Drawer Bins FrameCarpet Laminated plywood - Top Deck Deck SetProduct Dimensions:Overall Dimensions:974mm (38.3'') L x 1324mm (52.1'') W x 330mm (13'') HInterior Drawer Dimensions:Left Hand Drawer:914mm (36'') L x 461mm (18.2'') W x 208mm (8.2'') HRight Hand Drawer:914mm (36'') L x 373mm (14.7'') W x 208mm (8.2'') HWeight:82.4kg (181.7lbs)Load Rating:113Kg (250lbs) per DrawerSpecial Notes:Supplied with a T-wrench and custom socket for operating the wheel winder through the drawer system.

Consists of:1x Wooden shelf1x Mild steel frame1x Fastening Kit   Material used:Shelf: Stained PlywoodFrame: Black powder-coated mild steel   Product dimensions:209mm (8.2'') L x 997mm (39.3'') W x 36mm (1.4'') H   Weight:3.8kg (8.4lbs)

Consists of:1 x Drawer base unit (SSDR003)1 x Land Rover Discovery Sport Deck Completion Set2 x Push to close latch with 2 keys per lock 3 x Accessory channels6 x Eye Nuts for accessory channelsInstallation HardwareFitting InstructionMaterials used:Aluminum - Accessory Channels Sub FrameBlack powder coated steel - Drawer Bins FrameUV resistant nylon Carpet Laminated Plywood - Top Deck Side DeckProduct Dimensions:857mm (33.7) L x 1215mm (47.8) W x 331mm (13) HInterior Drawer Dimensions:Left Hand Drawer:717mm (28.2) L x 348mm (13.7) W x 210mm (8.3) HRight Hand Drawer:717mm (28.2) L x 448mm (17.6) W x 210mm (8.3) HWeight:72.42kg (159.7lbs)Load Rating:113Kg (250lbs) per DrawerSpecial Notes:3 Drawer Dividers (SSCA048) can fit each Drawer

Defender - Door Opening Handle Assembly Designed and manufactured with precision these are a direct replacement for the plastic originals. The opening handle is machined from billet aluminium and has intricate detail machined into it with rounded edges and curved contours giving a true quality appearance to the door of your vehicle.

Terrafirma black powder coated Defender 90 rear bumper corners. This has been available for sale from Terrafirma 4x4 for over 10 years and has had ZERO warranty cases in the last 12 months. Fits ALL DEFENDERS. Protect the rear of your 90 with these excellent corner bumpers

Consists of:1x Under console safe2x Keys supplied Materials used:Black powder-coated mild steelCarpeted base Product Dimensions:433mm (17.1'') L x 275mm (10.8'') W x H 100mm (3.9'') Internal Dimensions:375mm (14.8'') L x 265mm W (10.4'') (Raised section)/205mm (8.1'') W (Lower Section) x 107mm (4.2'') H Weight:3.2kg (7.1lbs)

Consists of:1x Fastening Kit2x Pinch Welds2x Side Panels - 1 Left, 1 Right2x Mounting Brackets1x Top Panel2x Wooden Back Board1x Bottom PanelMaterials used:Black powder coated steelBack Board: Stained PlywoodProduct dimensions:860mm (33.9'') W x 310mm (12.2'') L x 654mm (25.8'') H (Box)860mm (33.9'') W x 310mm (12.2'') L x 746mm (29.4'') H (Overall incl. Brackets)Weight:13.1kg (28.9lbs)

Heavy Duty Rear Axle Kit - Defender (1999 - 2015) Kit includes two brand new aftermarket axles| new heavy duty drive flanges| flange gaskets| hub seals| lock washers and lock nuts to convert the rear bearings to an adjustable setup.

Fits ALL DEFENDERS, DISCOVERY 1 1989 - 1998 and RANGE ROVER CLASSIC. This kit allows the original rear top shock mount to be bolted 50mm lower on the chassis. The mounting bracket is lowered to give greater axle articulation.

Consists of:1x Mild steel wood Shelf1x Installation Kit Material used:Shelf: Stained PlywoodShelf Support: Black powder-coated mild steel Product dimensions:264mm (10.4'') L x 856mm (33.7'') W x 36mm (1.4'') H Weight:3.8kg (8.4lbs)