MODIFICATION

2.2Lt Engine Oil Cooler & Spin-on Oil Filter Conversion Kit - For vehicles with Factory Fitted metal Oil Filter.

The Hybrid consists of a standard Garrett turbocharger with 28% larger intake wheel & 10% larger exhaust wheel. This upgrade combined with our upgraded software, Inter-cooler, Exhaust & air intake modification.

2.2Lt & 2.4Lt Engine Oil Cooler & Spin-on Oil Filter Conversion Kit - For vehicles with Factory Fitted Plastic Oil Filter cartridge. Note: Image for illistration purpose only.  

Samco silicone hoses are made to the highest standards, using a tough 4 ply construction. These hoses are a direct replacement of your existing boost hoses making it very easy to change yourself.

A kit of parts to increase the 300 Tdi engines capacity to 2785cc from 2495cc. Based around many of the International HS2.8 internal parts, this kit increases the cubic capacity of the 300Tdi from 2.5 litres to 2.8 litres. This is achieved by increasing the bore and stroke,  HS 2.8 – 93mm bore and 102.5mm stroke. ‘300’ Tdi – 90.47mm bore and 97mm stroke

Package contains: 1X Fully Reconditioned modified Injector pump 1X Exhaust System 1X Turbo 1X Manifold 1X Silicon Hose Kit This modification gives more torque down low at 1300 RPM and more power up high. (see Dyno Spec's) The modification is achieved by variable vane turbo and modified injected pump to suit power down low and up high.

Fits all Defender Models Bilstein Australia have developed an easy bolt-in steering damper for users wanting the extra benefits for a vehicle that is used on the road as well as off it. Helps prevent steering shake over rough surfaces.

BONNET GUARD PROTECTOR LANDROVER DISCOVERY 1 -  2 DOOR & 4 DOOR 1990 - 1994 Genuine part - Brand new - still in original packaging.

When tackling a ledge or attacking steep descent’s, you always run the risk of damaging your Defender's rear end, especially on the 110 wheel base. The Bumperette's act as corner protectors, protecting both the vehicle's body & tail lights while also providing a step For roof top access.  

Made from copper unlike the original which lasts longer. A big advantage is that it will take up some distortion that might be present on the manifold saving replacement costs of an entire manifold.

Defender - Door Closing Handles Black Finish (Pair) This product offers a quality appearance to the interior of your vehicle, the handles are machined with great detail.

Defender - Door Closing Handles Polished Finish (Pair) This product offers a quality appearance to the interior of your vehicle, the handles are machined with great detail.

Defender - Door Locking Pegs (Pair)

Defender - Door Opening Handle Assembly Designed and manufactured with precision these are a direct replacement for the plastic originals. The opening handle is machined from billet aluminium and has intricate detail machined into it with rounded edges and curved contours giving a true quality appearance to the door of your vehicle.

Defender - Door Opening Handle Back Plates (Pair) These opening handle back plates are designed and manufactured specifically as a direct replacement for the plastic originals. The back plate is machined from billet aluminium and has intricate detail machined into it with rounded edges and curved contours giving a true quality appearance to the door of your vehicle.

DEFENDER 110 Lowered Height Comfort Kit After many years and thousands of pounds worth of development, Alive Tuning's comfort springs take away the harshness felt from imperfections of the road surface, providing a smooth ride and also improving the handling of the vehicle greatly, especially with our Uprated Rear Anti Roll bar and Bilstein B6 or Fox 2.0 dampers.

DEFENDER 110 Standard Height Comfort Kit After many years and thousands of pounds worth of development, Alive Tuning's comfort springs take away the harshness felt from imperfections of the road surface, providing a smooth ride and also improving the handling of the vehicle greatly, especially with our Uprated Rear Anti Roll bar and Bilstein B6 or Fox 2.0 dampers.

DEFENDER 2.2 DE-CAT PIPE This De-cat pipe for 2.2 Defenders will make the vehicle breathe better and also stop excessive heat from the cat coming into the vehicle.

DEFENDER 2.4 DE-CAT PIPE This De-cat pipe for 2.4 Defenders will make the vehicle breathe better and also stop excessive heat from the cat coming into the vehicle.

DEFENDER 90 Lowered Height Comfort Kit After many years and thousands of pounds worth of development, Alive Tuning's comfort springs take away the harshness felt from imperfections of the road surface, providing a smooth ride and also improving the handling of the vehicle greatly, especially with our Uprated Rear Anti Roll bar and Bilstein B6 or Fox 2.0 dampers.

DEFENDER 90 Standard Height Comfort Kit After many years and thousands of pounds worth of development, Alive Tuning's comfort springs take away the harshness felt from imperfections of the road surface, providing a smooth ride and also improving the handling of the vehicle greatly, especially with our Uprated Rear Anti Roll bar and Bilstein B6 or Fox 2.0 dampers.

This clock surround set offers an instant upgrade, with aesthetic rounded outer edge and angled center, these catch the light and show the contrast of the highlighted silver on a black background. These give a quality appearance to the interior.

This clock surround set offers an instant upgrade, with aesthetic rounded outer edge and angled center, these catch the light and show the contrast of the highlighted silver on a black background. These give a quality appearance to the interior.

DEFENDER TD5 DE-CAT PIPE This De-cat pipe for TD5 Defenders will make the vehicle breathe better and also stop excessive heat from the cat coming into the vehicle.

Defender Warning Light Panel Surround - Td5 Designed and developed for fitment around the warning light cluster, it is held in place by self adhesive to the dash binnacle. The component is machined from billet aluminium and has chamfered inner edges and rounded outer edges.

Discovery 2 Auxiliary Transmission Cooler Fits all Discovery 2 Models.

The factory Tie Down point on a Discovery 2 is NOT a recovery point. Thats why at Davis Performance we turned the Factory Tie Down Point into a Heavy Duty Recovery Point. We take a factory Tie Down Point, shape & weld solid steel onto The Tie Down Point. A block of solid steel is also fitted to...

Discovery 3 Auxiliary Transmission Cooler Fits all Discovery 3 Models.

Discovery 4 Auxiliary Transmission Cooler Fits all Discovery 4 Models.

EGR Blanking Plate with bolt cutouts so you can fit in while engine is in vehicle by just loosening the EGR bolts to slide in. !!!IMPORTANT!!! You will need the ECU modded also so the EGR no longer operates and so the check engine lights does not come on the dash.

2 x EGR Blanking Plates with bolt cutouts so you can fit in while engine is in vehicle by just loosening the EGR bolts to slide in. !!!IMPORTANT!!! You will need the ECU modded also so the EGR no longer operates and so the check engine lights does not come on the dash.

GENUINE STYLE FOLD-DOWN SIDE STEPS FOR LAND ROVER DEFENDER - CAN BE FITTED TO FRONT OR REAR SIDE DOORS Folding Side Step  for  Land Rover   Defender This part is top quality aftermarket  folding   side step This fold up step is for the  right  or  left  side of the vehicle ( front  or  rear  door) - it will  not suit the rear taildoor Suits  Land Rover   Defender

The Front vented disc kit is designed  to convert your non-vented disc vehicle to a vented disc vehicle.  This improves braking by allowing lower braking temperatures by dissipating heat. Vented rotors are a better option than traditional solid rotors . They dissipate heat better and don't warp or fade as much as solid rotors. They are also good for towing heavy loads.

GTB450 Td5 VNT Turbo Kit - Defender Td5 The result of six years development and testing in the harshest of environments, the GTB450 is the direct fit VNT turbo for the Td5 that works as a VNT turbo should!

GTB450 VNT Turbo Kit - Discovery Td5 The result of six years development and testing in the harshest of environments, the GTB450 is the direct fit VNT turbo for the Discovery Td5 that works as a VNT turbo should!

GTB550 Td5 VNT Turbo Kit - Defender Td5 Like our smaller GTB450, the result of six years development and testing in the harshest of environments, the GTB550 is the direct fit VNT turbo for the Td5 that not only works as a VNT turbo should, but has the capability to unleash massive power and torque!

GTB550 VNT Turbo Kit - Discovery Td5 Like our smaller GTB450, the result of six years development and testing in the harshest of environments, the GTB550 is the direct fit VNT turbo for the Td5 that not only works as a VNT turbo should, but has the capability to unleash massive power and torque!

Defender Heater Vents Sold as a pair. For models after 1989 chassis number FA453192

Heavy Duty Rear Axle Kit - Defender (1999 - 2015) Kit includes two brand new aftermarket axles| new heavy duty drive flanges| flange gaskets| hub seals| lock washers and lock nuts to convert the rear bearings to an adjustable setup.

Consists of:1 x Front Runner Drawer unit (SSDR002)1 x Land Rover All-New Discovery Deck Completion Set2 x Push to Close latch with 2 keys per lock3 x Accessory Channels6 x Eye Nuts for Accessory Channel1 x T Wrench with 1 custom sockets for wheel winderInstallation Hardware including 4 turnbuckles to secure unit to vehicleFitting InstructionMaterials used:Aluminum - Accessory Channels Sub FrameBlack powder coated steel - Drawer Bins FrameCarpet Laminated plywood - Top Deck Deck SetProduct Dimensions:Overall Dimensions:974mm (38.3'') L x 1324mm (52.1'') W x 330mm (13'') HInterior Drawer Dimensions:Left Hand Drawer:914mm (36'') L x 461mm (18.2'') W x 208mm (8.2'') HRight Hand Drawer:914mm (36'') L x 373mm (14.7'') W x 208mm (8.2'') HWeight:82.4kg (181.7lbs)Load Rating:113Kg (250lbs) per DrawerSpecial Notes:Supplied with a T-wrench and custom socket for operating the wheel winder through the drawer system.

Consists of:2x Large light protectors4x Small light protectors12x Self tapping screwsMaterials used:Black plastic-coated high strength steel

Consists of:1xAluminium gullwing door assembly1x Outer frame1x Fastening kit2x Gas struts1x Right side inner bracket1x Left side inner bracket1x Top inner bracket1x Bottom inner bracketMaterials used:Black powder-coated 3mm aluminiumBlack powder-coated 2mm mild steel reinforcement plateBlack powder-coated high strength steelProduct Dimensions:Overall: L 1120mm (44.1) x W 50mm (2) x H 490mm (19.3)Door Panel: L 1044mm (41.1) x H 414mm (16.3)Weight:15.5kg (34.2lbs)

Consists of:1x Glass gullwing door assembly1x Outer frame1x Fastening kit2x Gas struts1x Right side inner bracket1x Left sideinner bracket1x Top inner bracket1x Bottom inner bracketMaterials used:6mm Toughened glass with tinted laminateBlack powder-coated high strength steelProduct Dimensions:Overall: L 1120mm (44.1) x W 50mm (2) x H 490mm (19.3)Door Panel: L 1044mm (41.1) x H 414mm (16.3)Weight:15kg (33.1lbs) Glass specifications: Visible Light:Transmission: 44Reflection Outside: 5 Solar Energy:Total Elimination: 38Reflection Outside: 5Absorption 1: 47Direct Transmission: 47SHGC: 0.62 Shading Coefficient:Ratio: 0.71 U Value:(W/m2).K (Center of Glass): 5.8

N/D

Consists of:1x Under console safe2x Keys supplied Materials used:Black powder-coated mild steelCarpeted base Product Dimensions:433mm (17.1'') L x 275mm (10.8'') W x H 100mm (3.9'') Internal Dimensions:375mm (14.8'') L x 265mm W (10.4'') (Raised section)/205mm (8.1'') W (Lower Section) x 107mm (4.2'') H Weight:3.2kg (7.1lbs)

Consists of: 2x Large light protectors4x Small light protectors12x Self tapping screwsMaterials used:Black plastic-coated high strength steelWeight:1.1kg (2.4lbs)

Consists of: 2x Large light protectors4x Small light protectors12x Self tapping screwsMaterials used:Black plastic-coated high strength steelWeight:1.1kg (2.4lbs)

Coming Soon!

Materials used: BPA-free polyethyleneDimensions (mm): Slanted from 560W to 380W x 270H x 310L

Materials used: BPA-free polyethyleneDimensions (mm): Slanted from 560W to 370W x 320H x 315L

BPLD017 - Land Rover Defender 90/110 (1983-2016) Fender Protector / Black - by Front Runner Consisting of: Material Used: Black epoxy powder - coated T6 aluminium Approximate Installed Weight: 2.2kg (4.85lbs) Shipping Dimensions: Width: 380mm (15'') Length: 1130mm (44'') Height: 35mm (1'') Shipping Weight: Weight: 2.2kg (5lbs)

Consists of:1 x Base Drawer unit with 1 Drawer1 x Deck Completion Set1 x Push to close latch with 2 keys2 x Drawer specific Drawer DividersInstallation HardwareFitting Instruction Materials used:Aluminum - Sub FrameBlack powder coated steel - Drawer Bins, Drawer Dividers FrameCarpet Laminated plywood - Top Deck Product Dimensions:1095mm (43.1'') L x 1136mm (44.7'') W x 219mm (8.6'') H Internal Drawer Dimensions:1000mm (39.4'') L x 650mm (25.6'') W x 164mm (6.5'') H Weight:72kg (158.7lbs) Load Rating:150Kg (330lbs) Special Notes:Items can be secured to the top deck with screws or drilled and bolted through.

Consists of:1 x Base Drawer unit with 1 Drawer1 x Push to close latch with 2 keys2 x Drawer specific Drawer DividersInstallation hardwareFitting InstructionMaterials used:Aluminum - Sub FrameBlack powder coated steel - Drawer Bins, Drawer Dividers FrameCarpet Laminated plywood - Top DeckProduct Dimensions:1110mm (43.7'') L x 910mm (35.8'') W x 215mm (8.5'') HInternal Drawer Dimensions:1000mm (39.4'') L x 650mm (25.6'') W x 164mm (6.5'') HWeight:60.4Kg (133.2lbs)Load Rating: 150Kg (330lbs)Special Notes:Items can be secured to the top deck with screws or drilled and bolted through.

Consists of:1x Fastening Kit2x Pinch Welds2x Side Panels - 1 Left, 1 Right2x Mounting Brackets1x Top Panel2x Wooden Back Board1x Bottom PanelMaterials used:Black powder coated steelBack Board: Stained PlywoodProduct dimensions:860mm (33.9'') W x 310mm (12.2'') L x 654mm (25.8'') H (Box)860mm (33.9'') W x 310mm (12.2'') L x 746mm (29.4'') H (Overall incl. Brackets)Weight:13.1kg (28.9lbs)

Consists of:1x Mild steel wood Shelf1x Installation Kit Material used:Shelf: Stained PlywoodShelf Support: Black powder-coated mild steel Product dimensions:264mm (10.4'') L x 856mm (33.7'') W x 36mm (1.4'') H Weight:3.8kg (8.4lbs)

The edge of the Defender seat box is prone to damage, protect that edge and smarten up your interior with these protectors. Made from 2mm stainless steel and CNC cut for accuracy. Less than 5 minutes to fit and all you need is a drill for the fixings. Kit includes a pair of corner protectors and steel self drill fixings.

The edge of the Defender seat box is prone to damage, protect that edge and smarten up your interior with these protectors. Made from 2mm stainless steel and CNC cut for accuracy. Less than 5 minutes to fit and all you need is a drill for the fixings. Kit includes a pair of corner protectors and steel self drill fixings. These will also fit a Series 2 & 3 but will require matching drilling to accommodate seat rail fixing.

Consists of:1 x Spare StrapMaterials used:Black powder coated high strength steelProduct Dimensions:385mm (15.2'') L x 38mm (1.5'') W x 112mm (4.4'') HWeight:318g (11.2oz)

Consists of: 1x Fastening Kit 2x Pinch Welds2x Side Panels - 1 Left, 1 Right2x Mounting Brackets1x Top Panel2x Wooden Back Panels1x Bottom Panel Materials used: Black powder-coated mild steel Product Dimensions: L 255mm (10)x W 1000mm (39.4)x H 654mm (25.8) Weight: 13.1kg (28.9lbs)

Consists of:1x Wooden shelf1x Mild steel frame1x Fastening Kit   Material used:Shelf: Stained PlywoodFrame: Black powder-coated mild steel   Product dimensions:209mm (8.2'') L x 997mm (39.3'') W x 36mm (1.4'') H   Weight:3.8kg (8.4lbs)

Land Rover Defender / Discovery 1 HD Maxi-Drive Flange Set Land Rover HD MaxiDrive Probally one of the best HD Drive Flangers On The Market Today. Price is Per Pair Suits All Defender Front And Rear on Standard Axles.  To suit: Land Rover Defenders 1994 Onwards With Disk Brakes All Round Land Rover Discovery 1

Fits ALL DEFENDERS, DISCOVERY 1 1989 - 1998 and RANGE ROVER CLASSIC. Increase the body clearance to allow the fitment of really big tyres as well as provide an additional 50mm of lift to your suspension. These simple spacers bolt between the coil spring and the axle and can be the perfect way to lift the vehicle to the desired ride height when the load or equipment carried exceeds even the heaviest rated coil springs.

Consists of:1 x Assembled ladder1 x Z-bracketBolt kitMaterials used:304 Stainless steelElectroplated and black powder coatedWeight:4kg (8.8lbs)

For Discovery 2’s with rear air suspension this simple kit will increase ground clearance and tyre to body clearance. If the rear air springs are to be retained to maintain the self-levelling facility these spacer kits are the perfect solution for achieving a 50mm lift. The front kit compliments the rear perfectly.

Consists of:1 x Front Runner Drawer unit (SSDR002)1 x Land Rover Discovery LR3 LR4 Drawer Deck Completion Set2 x Push to Close latch with 2 keys per lock3 x Accessory Channels6 x Eye Nuts for Accessory Channel1 x T Wrench with 2 custom sockets for wheel winderInstallation Hardware including 4 turnbuckles to secure unit to vehicleFitting InstructionMaterials used:Aluminum - Accessory Channels Sub FrameBlack powder coated steel - Drawer Bins FrameCarpet Laminated plywood - Top Deck Deck SetProduct Dimensions:Closed:972mm (38.3) L x 1230mm (48.4) W x 328mm (12.9) HOpen:1896mm (74.7) L x 1230mm (48.4) W x 328mm (12.9) HInterior Drawer Dimensions:Left Hand Drawer:914mm (36) L x 461mm (18.2) W x 208mm (8.2) HRight Hand Drawer:914mm (36) L x 373mm (14.7) W x 208mm (8.2) HWeight:80.3Kg (177lbs)Load Rating:113Kg (250lbs) per DrawerSpecial Notes:Supplied with a T-wrench and 2 custom sockets for operating the wheel winder through the drawer system.

Consists of:1 x Sump Guard4 x Rubber Spacer2 x Aluminium Spacers2 x Mounting BracketsMaterials used:Plate: 6mm AluminiumBracket: Black powder coated 8mm high strength steelProduct Dimensions:735mm (29'') L x 750mm (29.5'') WWeight:8kg (17.6lbs)

Consists of:1 x Drawer base unit (SSDR003)1 x Land Rover Discovery Sport Deck Completion Set2 x Push to close latch with 2 keys per lock 3 x Accessory channels6 x Eye Nuts for accessory channelsInstallation HardwareFitting InstructionMaterials used:Aluminum - Accessory Channels Sub FrameBlack powder coated steel - Drawer Bins FrameUV resistant nylon Carpet Laminated Plywood - Top Deck Side DeckProduct Dimensions:857mm (33.7) L x 1215mm (47.8) W x 331mm (13) HInterior Drawer Dimensions:Left Hand Drawer:717mm (28.2) L x 348mm (13.7) W x 210mm (8.3) HRight Hand Drawer:717mm (28.2) L x 448mm (17.6) W x 210mm (8.3) HWeight:72.42kg (159.7lbs)Load Rating:113Kg (250lbs) per DrawerSpecial Notes:3 Drawer Dividers (SSCA048) can fit each Drawer

Consists of:1 x Cargo Slide1 x Cargo Slide MountInstallation HardwareFitting Instruction Materials used:Black powder coated steel Product Dimensions:851mm (33.5'') L x 1087mm (42.8'') W x 170mm (6.7'') H Internal Drawer Dimensions:778mm (30.6'') L x 780mm (30.7'') W x 60mm (2.4'') H Weight:39.19kg (86.4lbs) Load Rating:113kg (250lbs)

Consists of:1 x Base Drawer unit (SSDR011)1 x Land Rover Deck Completion Set (1 Left hand side 1 Right hand side)1 x Set of Front Covers (1 Left hand side 1 Right hand side)1 x Push to close latch with 2 keys2 x Accessory channels4 x Eye Nuts for accessory channelInstallation HardwareFitting Instruction Materials used:Aluminum - Accessory Channels Sub FrameBlack powder coated steel - Drawer Bins, Frame Front CoversCarpet Laminated plywood - Top Deck, Side Rear Deck Product Dimensions:625mm (24.6'') L x 1197mm (47.1'') W x 269mm (10.6'') H Weight37.3kg (82.2lbs)  

The system modifies the height sensor signals, offsetting each of the 4 valves to cause the suspension module to believe that the vehicle is lower or higher than it really is & therefore adjust the air volume in the air springs until the modified sensor signals are as expected for the target height. The system does not communicate with nor modify the suspension module, thereby retaining unaltered all original plausibility and control checks.

RANGE ROVER ELECTRONIC HEIGHT CONTROL KIT The Llams electronic air suspension height controller allows selection of off-road and high-speed   heights at any speed.

RANGE ROVER SPORT ELECTRONIC HEIGHT CONTROL KIT The Llams electronic air suspension height controller allows selection of off-road and high-speed   heights at any speed.

The system modifies the height sensor signals, offsetting each of the 4 valves to cause the suspension module to believe that the vehicle is lower or higher than it really is & therefore adjust the air volume in the air springs until the modified sensor signals are as expected for the target height. The system does not communicate with nor modify the suspension module, thereby retaining unaltered all original plausibility and control checks.

The Llams electronic air suspension height controller allows selection of off-road and high-speed   heights at any speed.   Sand, tracks and high-crown outback roads can now be driven at either full off-road height or a lesser 30 mm raised height without the normal 50 kph speed restriction then return to on-road height when conditions are suitable. Raised by 30 mm provides improved ride on rough tracks due to more bump-stop clearance. High speed lowered height provides improved on-road handling without the usual high speed requirement and when used with Access mode it provides improved access for young children and the mobility-impaired.

The Llams electronic air suspension height controller allows selection of off-road and high-speed   heights at any speed.   Sand, tracks and high-crown outback roads can now be driven at either full off-road height or a lesser 30 mm raised height without the normal 50 kph speed restriction then return to on-road height when conditions are suitable. Raised by 30 mm provides improved ride on rough tracks due to more bump-stop clearance. High speed lowered height provides improved on-road handling without the usual high speed requirement and when used with Access mode it provides improved access for young children and the mobility-impaired.

DISCOVERY 5 ELECTRONIC HEIGHT CONTROL KIT The Llams electronic air suspension height controller allows selection of off-road and high-speed   heights at any speed.

The Llams electronic air suspension height controller allows selection of off-road and high-speed   heights at any speed.   Sand, tracks and high-crown outback roads can now be driven at either full off-road height or a lesser 30 mm raised height without the normal 50 kph speed restriction then return to on-road height when conditions are suitable. Raised by 30 mm provides improved ride on rough tracks due to more bump-stop clearance. High speed lowered height provides improved on-road handling without the usual high speed requirement and when used with Access mode it provides improved access for young children and the mobility-impaired.

The Llams electronic air suspension height controller allows selection of off-road and high-speed   heights at any speed.   Sand, tracks and high-crown outback roads can now be driven at either full off-road height or a lesser 30 mm raised height without the normal 50 kph speed restriction then return to on-road height when conditions are suitable. Raised by 30 mm provides improved ride on rough tracks due to more bump-stop clearance. High speed lowered height provides improved on-road handling without the usual high speed requirement and when used with Access mode it provides improved access for young children and the mobility-impaired.

The Llams electronic air suspension height controller allows selection of off-road and high-speed   heights at any speed.   Sand, tracks and high-crown outback roads can now be driven at either full off-road height or a lesser 30 mm raised height without the normal 50 kph speed restriction then return to on-road height when conditions are suitable. Raised by 30 mm provides improved ride on rough tracks due to more bump-stop clearance. High speed lowered height provides improved on-road handling without the usual high speed requirement and when used with Access mode it provides improved access for young children and the mobility-impaired.