PROTECTION & TRIM

Polish & Wax Applicator Kit  is recommended for the manual application of the E-Valence range of polishes and waxes and other selected products.

Preeminent 50% Carnauba Wax  is the flagship of our product line. It is the best car wax on the market today. It will enhance, protect, and seal the lustre in the paint for up to 12 months*. Known as the “queen of waxes”, Carnauba Wax occurs naturally in Brazil.  It is a by-product from the leaf of the carnauba palm. An exceptionally hard and durable wax. Making it the best natural, long term paint protection against UV rays for cars, boats, bikes, and planes.

Tar Rubber & Bug Remover  only removes what you don’t want. That said it removes everything you don’t

pH Neutral Alloy & Wire Wheel Cleaner  is the unparalleled alloy and wire wheel cleaner available on the market today. It is 100% water based, 100% biodegradable and 100% silicone, solvent and VOC(Volatile Organic Compounds) free. A sensible balance of mild surfactants rather than a mix of aggressive high-level alkali and acid chemicals.

CLIP-CARPET – Plastic fir tree fixings for Land Rover vehicles. Plastic fir tree fixings are automotive fasteners, manufactured in nylon which are a original manufacturer replacement trim clip.

GENUINE STYLE FOLD-DOWN SIDE STEPS FOR LAND ROVER DEFENDER - CAN BE FITTED TO FRONT OR REAR SIDE DOORS Folding Side Step  for  Land Rover   Defender This part is top quality aftermarket  folding   side step This fold up step is for the  right  or  left  side of the vehicle ( front  or  rear  door) - it will  not suit the rear taildoor Suits  Land Rover   Defender

Consists of:1 x Sump Guard1 x Belly GuardInstallation HardwareFitting InstructionsMaterials used:3mm Black powder coated high strength steelProduct Dimensions:973mm (38.3) L x 840mm (33.1) W x 149mm (5.9) HWeight:13.06kg (28.8lbs)Special Notes:Both the sump and belly guard fit to existing mounting points on the vehicle, therefore no drilling or modification to the vehicle is required.The sump guard has 4.5mm ribs that strengthen the guard and prevent larger obstacles from scratching the guard.

Defender Heater Vents Sold as a pair. For models after 1989 chassis number FA453192

Consists of:2 x Spotlight brackets Material used:Black powder-coated 3mm steelProduct Dimensions:93mm (3.7'') L x 84mm (3.3'') W x 65mm (2.6'') HWeight:0.23kg (0.5lbs)

Material used: Brackets: high strength steel and black powder coated Slats: Black powder coated aluminium Product Dimensions: W 1475mm (58.1) x D 550mm (21.7) x H 50mm (1.96) Weight: 25.54kg (56.31lbs)

Key / Remote Pad Cover Discovery 3 and 4 Replaces worn pad on key

Key / Remote Pad Cover Range Rover Replaces worn pad on key

Land Rover Clip-snap-sack (EYC101460) part for Discovery 1 1989 - 1998 (from Fa393361 To Wa799999) Classic, Discovery 2 1998 - 2004 Classic, Freelander 1996 - 2006 Classic, Range Rover 1994 - 2001 Classic, Range Rover Classic 1992 - 1994 (from Ja610294) Classic.

Consists of:2x Large light protectors4x Small light protectors12x Self tapping screwsMaterials used:Black plastic-coated high strength steel

Consists of:1xAluminium gullwing door assembly1x Outer frame1x Fastening kit2x Gas struts1x Right side inner bracket1x Left side inner bracket1x Top inner bracket1x Bottom inner bracketMaterials used:Black powder-coated 3mm aluminiumBlack powder-coated 2mm mild steel reinforcement plateBlack powder-coated high strength steelProduct Dimensions:Overall: L 1120mm (44.1) x W 50mm (2) x H 490mm (19.3)Door Panel: L 1044mm (41.1) x H 414mm (16.3)Weight:15.5kg (34.2lbs)

N/D

Coming Soon!

BPLD017 - Land Rover Defender 90/110 (1983-2016) Fender Protector / Black - by Front Runner Consisting of: Material Used: Black epoxy powder - coated T6 aluminium Approximate Installed Weight: 2.2kg (4.85lbs) Shipping Dimensions: Width: 380mm (15'') Length: 1130mm (44'') Height: 35mm (1'') Shipping Weight: Weight: 2.2kg (5lbs)

The edge of the Defender seat box is prone to damage, protect that edge and smarten up your interior with these protectors. Made from 2mm stainless steel and CNC cut for accuracy. Less than 5 minutes to fit and all you need is a drill for the fixings. Kit includes a pair of corner protectors and steel self drill fixings.

The edge of the Defender seat box is prone to damage, protect that edge and smarten up your interior with these protectors. Made from 2mm stainless steel and CNC cut for accuracy. Less than 5 minutes to fit and all you need is a drill for the fixings. Kit includes a pair of corner protectors and steel self drill fixings. These will also fit a Series 2 & 3 but will require matching drilling to accommodate seat rail fixing.

Consists of:1 x Aluminum Guard Plate1 x Pair of BracketsInstallation HardwareFitting InstructionsMaterials used:6mm Aluminum plate Black powder coated 8mm mild steelProduct Dimensions:373.5mm (14.7) L x 750mm (29.5) W x 252mm (9.9) H (Including brackets)Weight:18.5kg (40.8lbs)Special Notes:Fits the Land Rover Defender 90 110 series