RACKS

RRSAD1255 - 1255mm Slat Add-On Kit Consisting of: 1 x RRAC045 - Additional Tray Slat Bolts 1 x RRSS1255 - Standard Slat- 1255mm Wide Rack Approximate Installed Weight 2kg (4lbs)   Shipping Dimensions: Width 110mm (4'')Length 1260mm (50'')Height 70mm (3'')   Shipping Weight: Weight 2.2kg (4.8lbs)

RRSAG1345 - 1345mm Slat Add-On Kit Consisting of: 1 x RRAC045 - Additional Tray Slat Bolts 1 x RRSS1345 - Standard Slat- 1345mm Wide Rack Approximate Installed Weight 2kg (4lbs)   Shipping Dimensions: Width 110mm (4'')Length 1350mm (53'')Height 70mm (3'')   Shipping Weight: Weight 2.3kg (5.0lbs)

RRSAJ1425 - 1425mm Slat Add-On Kit Consisting of: 1 x RRAC045 - Additional Tray Slat Bolts 1 x RRSS1425 - Standard Slat- 1425mm Wide Rack Approximate Installed Weight 2kg (4lbs)   Shipping Dimensions: Width 110mm (4'')Length 1430mm (56'')Height 70mm (3'')   Shipping Weight: Weight 2.4kg (5.2lbs)

RRSAM1475 - 1475mm Slat Add-On Kit Consisting of: 1 x RRAC045 - Additional Tray Slat Bolts 1 x RRSS1475 - Standard Slat- 1475mm Wide Rack Approximate Installed Weight 2kg (5lbs)   Shipping Dimensions: Width 110mm (4'')Length 1480mm (58'')Height 70mm (3'')   Shipping Weight: Weight 2.4kg (5.3lbs)

RRSS1575 - 1575mm Slat - by Front Runner Consisting of: Material Used: Black epoxy powder - coated T6 aluminium Approximate Installed Weight: 1.95kg (4.3lbs) Shipping Dimensions: Width: 90mm (4'') Length: 1570mm (62'') Height: 23mm (1'') Shipping Weight: Weight: 1.95kg (4lbs)

Consists of:1x Jerry can with air-tight cap Materials used:Black painted steel Product Dimensions:350mm (13.8'') L x 165mm (6.5'') W x 460mm (18.1'') H Weight:3.82kg (8.42lbs)Special Notes SKU 20LJCB

Consists of:1 x Drawer unitFitting InstructionsMaterials used:Black powder coated mild steel - Drawer unitProduct Dimensions:906mm (35.7'') L x 696mm (27.4'') W x 262mm (10.3'') HInterior Drawer Dimensions:882mm (34.7'') L x 646mm (25.4'') W x 45mm (1.8'') HWeight:38.44kg (84.7lbs)Special Notes:The drawer has a rotating latch to secure the drawer in place.

Consists of:1 x Drawer unitFitting InstructionsMaterials used:Black powder coated mild steel - Drawer FrameNylon Carpet Laminated Plywood - Top DeckProduct Dimensions:653mm (25.7) L x 940mm (37) W x 261mm (10.3) HInterior Drawer Dimensions:Full Size:629mm (24.8) L x 890mm (35) W x 45mm (1.8) H(NOTE: This unit has a 20mm (0.8) H rib down the middle)2 Equally Sized Sections (Left Right Hand Side):629mm (24.8) L x 440mm (17.3) W x 45mm (1.8) HWeight:36.8kg (81.1lbs)Load Rating:113kg (250lbs)Special Notes:The drawer has a rotating latch to secure drawer in place.

Consists of:1 x Storage Unit2 x Top DecksInstallation Hardware Fitting Instructions Materials used:Black powder-coated aluminium and steel Product Dimensions:971mm (38.2'') L x 971mm (38.2'') W x 310mm (12.2'') H Weight:36kg (79.4lbs) Special Note:80kg (176.4lbs) top deck load capacity

Consists of:1 x Lightbar1 x Set of Front Mount Brackets (1 Left Hand side 1 Right Hand side)1 x Set of Underneath Mount Brackets (1 Left Hand side 1 Right Hand side)1 x Front CoverInstallation HardwareFitting Instructions Materials used:Black powder coated steel and aluminium mounting brackets Product Dimensions:Light Bar:1031mm (40.6'') L x 67mm (2.6'') D x 35mm (1.4'') H Light Bar with Bracket:1070mm (42.1'') L x 102mm (4'') W x 58mm (2.3'') H Weight:5.56kg (12.3lbs) Special Notes:Product type: On-road and off-roadSKU: VX1000-CB SMLED supplier: OSRAMLumens: 600012/24VColor temperature: 5700 KLifespan Tc: 5000 hGuarantee: 5 yearsDouble ECE-Certification: 2x R112Reference Number: (37,5 + 37,5)

Consists of:1 x 4'' 27W Square LED Work Light1 x Mounting Bracket Set Materials used:Aluminum housingPMMA polycarbonateStainless steel mounting brackets Product Dimensions:128mm (5'') L x 110mm (4.3'') W x 55mm (2.2'') H Weight:0.9kg (2lbs) Special Note:Operating Temperature: -40°C - +60°CIP Rating: IP67Protections: Reverse PolarityInput Voltage: 9-32V DCPower Consumption: 3W*9PCSLuminous Flux: 1620lmCurrent Draw: 2.1A@12V, 1.1A@24VColor Temperature: 6000KBeam Pattern: Flood BeamBeam Angle: 60deg

Consists of:1 x Drawer unitFitting InstructionsMaterials used:Black powder coated mild steel - FrameNylon Carpet Laminated Plywood -Top DrawerBaseProduct Dimensions:969mm (38.1) L x 940mm (37) W x 350mm (13.8) HInterior Drawer Dimensions:Full Size:944mm (37.2) L x 890mm (35) W x 45mm (1.8) H(NOTE: This unit has a 20mm (0.8) H rib down the middle)2 Equally Sized Bottom Drawer Sections:944mm (37.2) L x 440mm (17.3) W x 45mm (1.8) HTop Drawer:948mm (37.3) L x 893mm (35.2) W x 71mm (2.8) HWeight:68.04kg (150lbs)Load Rating:113kg (250lbs) Interior Drawers113kg (250lbs) Top DrawerSpecial Notes:The drawer unit has rotating latches to secure both the top and bottom drawers in place.

Consists of:1 x Drawer unit with 1 Opening Drawer1 x Push to close latch with 2 keys3 x Accessory Channels6 x Tie Down Rings6 x Cub PacksInstallation HardwareFitting InstructionMaterials used:Black powder coated steel - FrameCarpet Laminated Plywood - Top DeckProduct Dimensions:Overall Dimensions:1000mm (39.4) L x 950mm (37.4) W x 285mm (11.2) HOpen Drawer Dimensions:1915mm (75.4) L x 950mm (37.4) W x 285mm (11.2) HInner Drawer Dimensions:946mm (37.2) L x 890mm (35) W x 222mm (8.7) HWeight:64.3kg (141.8lbs)Load Rating:113kg (250lbs)Special Notes:Items can be secured to the top deck using the 6 supplied tie down rings and fitting them accordingly to the 3 accessory channels on the top deck.Drawer has a hold open feature.

Consists of:1 x Drawer unit with 1 Opening Drawer1 x Push to close latch with 2 keys3 x Accessory Channels6 x Tie Down Rings6 x Low Lid Wolf PacksInstallation HardwareFitting InstructionMaterials used:Aluminum - Accessory Channels Sub FrameBlack powder coated steel - FrameCarpet Laminated plywood - Top DeckProduct Dimensions:Overall Dimensions:1252mm (49.3) L x 1083mm (42.6) W x 310mm (12.2) HDrawer Inner Dimensions:1197mm (47.1) L x 1031mm (40.6) W x 230mm (9.1) HDrawer Unit Open Dimensions:2163mm (85.2) L x 1083mm (42.6) W x 310mm (12.2) HWeight:67Kg (147.7lbs)Load Rating:113Kg (250lbs)Special Notes:Items can be secured to the top deck using the 6 supplied tie rings and fitting them accordingly to the 3 accessory channels on the top deck.Drawer has a hold open feature.

Consists of:1 x Drawer unit with 1 Opening Drawer1 x Push to close latch with 2 keys3 x Accessory Channels6 x Tie Down Rings6 x Low Lid Wolf Pack ProsInstallation HardwareFitting Instruction Materials used:Aluminum - Accessory Channels Sub FrameBlack powder coated steel - FrameCarpet Laminated plywood - Top Deck Product Dimensions:Overall Dimensions:1252mm (49.3'') L x 1083mm (42.6'') W x 310mm (12.2'') H Drawer Inner Dimensions:1197mm (47.1'') L x 1031mm (40.6'') W x 230mm (9.1'') H Drawer Unit Open Dimensions:2163mm (85.2'') L x 1083mm (42.6'') W x 310mm (12.2'') H Weight:67Kg (147.7lbs) Load Rating:113Kg (250lbs) Special Notes:Items can be secured to the top deck using the 6 supplied tie rings and fitting them accordingly to the 3 accessory channels on the top deck.Drawer has a hold open feature.

Consists of: 2x M8x25 Button Heads

KRAA001T - Audi A4 Allroad (2009-2016) Slimline II Roof Rail Rack Kit - by Front Runner Consisting of: 2x GOFR001 - Grab on Flush Rail Feet2x GOFR014 - Flush Rail Outer Grips / No. 62x GOFR035 - Flush Rail Inner Grips / F1x RRSTA07 - SLII Tray - 1165mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 23.02kg (50.75lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Weight: 445mm (18'')Length: 1730mm (68'')Height: 150mm (6'')Shipping Weight:Weight: 24kg (53lbs)

KRAQ001T - Audi Q3 (2011-Current) Slimline II Roof Rail Rack Kit - by Front Runner Consisting of: 2x GOFR001 - Rail Foot Base (Pair)2x GOFR014 - Flush Rail Outer Grips / No. 62x GOFR031 - Flush Rail Inner Grips / B1x RRSTD06 - SLII Tray - 1255mm(W)X1156mm(L)1x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair /1165mm Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 44.25kg (97.55lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18'') Length: 1615mm (64'') Height: 140mm (6'') Shipping Weight: Weight: 20.57kg (45lbs)

KRAQ002T - Audi Q5 (2009-Current) Slimline II Roof Rail Rack Kit - by Front Runner Consisting of: 2x GOFR001 - Rail Foot Base (Pair)2x GOFR014 - Flush Rail Outer Grips / No. 62x GOFR031 - Flush Rail Inner Grips / B1x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair)1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)1x WDST010 - Wind Deflector 20mm Lip Narrow Pair /1255mm(W) Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 25.35kg (55.89lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18'') Length: 1730mm (68'') Height: 140mm (6'') Shipping Weight: Weight: 26.46kg (58lbs)

KRAQ004T - Audi Q7 (2010-2015) Slimline II Roof Rack Kit - by Front Runner Consisting of: 2 x GOFR001 - Rail Foot Base (Pair) - by Front Runner 2 x GOFR014 - Flush Rail Outer Grips / No. 6 - by Front Runner 2 x GOFR031 - Flush Rail Inner Grips / B - by Front Runner 1 x RRSTD07 - Slimline II Tray - 1255mm(W) X 1358mm(L) - by Front Runner 1 x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair / 1165mm(W) - by Front Runner   Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight 22kg (49lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.   Shipping Dimensions: Width 450mm (18'')Length 1615mm (64'')Height 140mm (6'')   Shipping Weight: Weight 25.7kg (56.5lbs)

KRAQ003T - Audi Q7 (4L) (2005-2010) Slimline II Roof Rail Rack Kit - by Front RunnerConsisting of: 3x GOFR001 - Rail Foot Base (Pair)3x GOFR014 - Flush Rail Outer Grips / No. 63x GOFR031 - Flush Rail Inner Grips / B1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)1x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair /1165mmMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 55kg (121.25lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 450mm (18'')Length: 1615mm (64'')Height: 140mm (6'')Shipping Weight:Weight: 27.69kg (61lbs)