ACCESSORY

Preeminent 50% Carnauba Wax  is the flagship of our product line. It is the best car wax on the market today. It will enhance, protect, and seal the lustre in the paint for up to 12 months*. Known as the “queen of waxes”, Carnauba Wax occurs naturally in Brazil.  It is a by-product from the leaf of the carnauba palm. An exceptionally hard and durable wax. Making it the best natural, long term paint protection against UV rays for cars, boats, bikes, and planes.

Tar Rubber & Bug Remover  only removes what you don’t want. That said it removes everything you don’t

pH Neutral Alloy & Wire Wheel Cleaner  is the unparalleled alloy and wire wheel cleaner available on the market today. It is 100% water based, 100% biodegradable and 100% silicone, solvent and VOC(Volatile Organic Compounds) free. A sensible balance of mild surfactants rather than a mix of aggressive high-level alkali and acid chemicals.

Consists of:RRAC066 - Expedition Tubing D (525.5mm and 365.5mm) RRAC071 - Expedition Rail Corner SetRRAC072 - Expedition Rail LH RH Drop SetRRAC073 - Expedition Rail Joiner   Materials used:Powder coated Aluminium die cast jointsPowder coated 304 Stainless Steel tubing Product Dimensions:485mm (19.1'') L x 1255mm (49.4'') W x 112mm (4.4'') H   Weight:2.42kg (5.3lbs)

Consists of:RRAC067 - Expedition Tubing G (570.5mm)RRAC071 - Expedition Rail Corner SetRRAC072 - Expedition Rail LH RH Drop SetRRAC073 - Expedition Rail Joiner Materials used:Powder coated Aluminium die cast jointsPowder coated 304Stainless Steeltubing Product Dimensions:690mm (27.2) L x 1345mm (53) W x 112mm (4.4) H Weight:2.74kg (6lbs)

Consists of:RRAC068 - Expedition Tubing J (610.5mm and 570.5mm)RRAC071 - Expedition Rail Corner SetRRAC072 - Expedition Rail LH RH Drop SetRRAC073 - Expedition Rail Joiner Materials used:Powder coated Aluminium die cast jointsPowder coated 304 Stainless Steel tubing Product Dimensions:690mm (27.2) L x 1425mm (56.1) W x 112mm (4.4) H Weight:2.84kg (6.3lbs)

Consisting of:1x RRAC072 - Expedition Rail LH + RH Drop Set1x RRAC073 - Expedition Rail Joiner1x RRAC085 - Expedition Rail Tubing 07 (480mm) Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Product Dimensions:1231mm (48.5'') L x 21mm (0.8'') W x 63mm (2.5'') H Weight:1.1 kg (2.4 lbs)

Consists of:2x RRAC066 - Expedition Tubing D (525.5mm and 365.5mm) 2x RRAC071 - Expedition Rail Corner Set2x RRAC072 - Expedition Rail LH RH Drop Set3x RRAC073 - Expedition Rail Joiner 1x KRXX001 - Expedition Rail Middle Kit Materials used:Powder coated Aluminium die cast jointsPowder coated 304 Stainless Steeltubing Product Dimensions:Min: 752mm (29.6) - Max: 2772mm (109.1) L x 1255mm (49.4) W x 112mm (4.4) H Weight:7.62kg (16.8lbs)

Consists of:2x RRAC068 - Expedition Tubing J (610.5mm and 570.5mm)2x RRAC071 - Expedition Rail Corner Set2x RRAC072 - Expedition Rail LH RH Drop Set3x RRAC073 - Expedition Rail Joiner 1x KRXX001 - Expedition Rail Middle Kit Materials used:Powder coated Aluminium die cast jointsPowder coated 304Stainless Steeltubing Product Dimensions:Min: 752mm (29.6) - Max: 2772mm (109.1) L x 1425mm (56.1) W x 112mm (4.4) H Weight:8.46kg (18.6lbs)

Consists of:6x Tubular rails2x Cast LH drop downs2x Cast RH drop downs4x Mid-joints with C-clipsInstallation hardware Materials used:Black powder-coated stainless steelBlack powder-coated die cast aluminium Product Dimensions:1844mm (72.6) L x 20mm (0.8) W x 62mm (2.4) H This is one side only (LH RH same dimensions) Weight:3.1kg (6.8lbs)

Consists of:6x Tubular rails2x Cast LH drop downs2x Cast RH drop downs4x Mid-joints with C-clipsInstallation hardware Materials used:Black powder-coated stainless steelBlack powder-coated die cast aluminium Product Dimensions:2046mm (80.6) L x 20mm (0.8) W x 62mm (2.4) H This is one side only (LH RH same dimensions) Weight:3.6kg (7.9lbs)

Consists of:8x Tubular rails2x Cast LH drop downs2x Cast RH drop downs6x Mid-joints with C-clipsInstallation hardware Materials used:Black powder-coated stainless steelBlack powder-coated die cast aluminium Product Dimensions:2248mm (88.5) L x 20mm (0.8) W x 62mm (2.4) H This is one side only (LH RH same dimensions) Weight:3.87kg (8.5lbs)

Consists of:1x Tow neck1x Tow ball1x Pin1x R-clipNuts and bolts kit Materials used:Black powder-coated mild steel Weight:5.2kg (11.5lbs)

Material used: Tank: BPA-free polyethylene Fittings: Plastic   Capacity: 40l (10.6gal)   Product Dimensions: W 1200mm (47.2'') x H 180mm (7.1'') x L 250mm (9.8'')   Cut-out: W 210mm (8.3'') - W 300mm (11.8'') x H 110mm (4.3'')   Weight: 4.98kg (11lbs)Special NotesSKU CR1297-GY-COMP

KRFM005T - Ford DC (2012-2022) Slimline II Roof Rack Kit - by Front RunnerConsisting of: 1x FASS012 - Foot Set / 40mm - 50mm1x FASS014 - Foot Set - Angled / 65mm1x RRSTD06 - SLII Tray - 1255mm(W)X1156mm(L)1x TRFR001 - Ford Ranger (2012-Current) Tracks / 1200mm(L)1x WDST010 - Wind Deflector 20mm Lip Narrow Pair /1255mm(W)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 25.11kg (55.36lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 450mm (18'')Length: 1730mm (68'')Height: 140mm (6'')Shipping Weight:Weight: 28.43kg (63lbs)

Consists of:1 x Slimsport Rack 40'' Light Bar Wind Fairing1 x Protection StripInstallation HardwareFitting Instructions Materials used:Black powder coated steel Product Dimensions:1405mm (55.3'') L x 210mm (8.3'') W x 119mm (4.7'') H Weight:4.55kg (10lbs)

Consists of:1 x Ford F-150 Super Crew Slimsport Rack Wind FairingInstallation HardwareFitting Instructions Materials used:Black powder coated steel Product Dimensions:1405mm (55.3'') L x 219mm (8.6'') W x 223mm (8.8'') H Weight:4.02kg (8.9lbs)

Consists of:1 x Slimsport Rack 40'' Light Bar Wind Fairing1 x Protection StripInstallation HardwareFitting Instructions Materials used:Black powder coated steel Product Dimensions:1405mm (55.3'') L x 210mm (8.3'') W x 119mm (4.7'') H Weight:4.55kg (10lbs)

Consists of:1 x Ford F-150 Super Crew Slimsport Rack Wind Fairing1 x Protection StripInstallation HardwareFitting Instructions Materials used:Black powder coated steel Product Dimensions:1405mm (55.3'') L x 219mm (8.6'') W x 223mm (8.8'') H Weight:4.02kg (8.9lbs)

KRFF033T - Ford F-250-F-350 ReTrax XR 8'' (2019-Current) Slimline II Load Bed Rack Kit - by Front Runner Consisting of:4x LASS027 - Leg Spacer 6mm (Pair)4x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTP12 - SLII Tray - 1575mm(W)X2368mm(L) Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 44.65kg (98.44lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 440mm (17'')Length: 1730mm (68'')Height: 260mm (10'') Shipping Weight:Weight: 46kg (101lbs)

Coming Soon!