RACKS

Consists of:1 x Assembled ladder1 x Z-bracketBolt kitMaterials used:304 Stainless steelElectroplated and black powder coatedWeight:4kg (8.8lbs)

KRCC009T - Chevrolet Colorado/GMC Canyon 5'' Bed (2015-Current) ReTrax XR Slimline II Load Bed Rack Kit - by Front Runner Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L) Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 29.53kg (65.1lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 440mm (17'')Length: 1730mm (68'')Height: 240mm (9'') Shipping Weight:Weight: 30kg (66lbs)

Material used: Tank: BPA-free polyethylene Fittings: Plastic   Capacity: 50l (13.2gal)   Product Dimensions: W 1000mm (39.4'') x H 350mm (13.8'') x L tapered 200mm (7.9'') to 150mm (5.9'')   Weight: 5.08kg (11.2lbs)Special NotesSKU HT029FR-GY-COMP

Consists of:1.5m (5') Length of beadingMaterials used: Ethylene propylene diene monomer (M-class) all weather rubberWeight:0.1kg (0.3lbs)

KVCJ001T - Citroen Jumper (L1H1/118” WB/Low Roof) (2014-Current) Slimpro Van Rack Kit - by Front Runner Consisting of:3x FAVF002 - FPCR Foot Set - by Front Runner1x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps4x RRNS1475 - Narrow Slat / 1475mm (Pair)1x SPVT001 - Van Rack Side Profile / 1156mm1x SPVT002 - Van Rack Side Profile / 1358mm1x WDST013 - Wind Deflector Van Rack 30mm Lip Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Assembled Rack Kit Dimensions:2570mm (101.2'') L x 1565mm (61.6'') W x 127mm (5'') H Approximate Installed Weight: 30.99kg (68.32lbs) Citroen Jumper Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat. The slat T slots and side profiles take standard M8 hex bolts top and bottom. Shipping Dimensions:Width: 300mm (12'')Length: 1805mm (71'')Height: 195mm (8'')Shipping Weight:Weight: 35.35kg (78lbs)

Wash’n Seal with Carnauba Wax  is not just any car wash. It is a complete car cleaning and waxing process in one. Our E-Valence Technology ensures it’s simply the best wash and wax to bring out the natural lustre in the paint. Additionally, it contains a UV inhibitor which will help to protect the paint from the suns harmful UV rays.

KRCS006 - Chevrolet Silverado Crew Cab / Short Load Bed (2007 - Current) Triple Load Bar Kit - by Front Runner Consisting of: 3 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x LBSK019 - Roof Load Bar Set 1575mm(W) - by Front Runner1 x TRBU002 - Bakkie Load Bed Tracks / 1200mm(L) - by Front Runner Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 15.9kg (35.0lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot, Grab-on Foot or Strap-On Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 1685mm (66.0'')Length: 125mm (5.0'')Height: 385mm (15.0'') Shipping Weight:14.4kg (32.0lbs)

Consists of:1 x Cargo Slide1 x Cargo Slide MountInstallation HardwareFitting Instruction Materials used:Black powder coated steel Product Dimensions:851mm (33.5'') L x 1087mm (42.8'') W x 170mm (6.7'') H Internal Drawer Dimensions:778mm (30.6'') L x 780mm (30.7'') W x 60mm (2.4'') H Weight:39.19kg (86.4lbs) Load Rating:113kg (250lbs)

Consists of:1 x Slimsport Rack 40'' Light Bar Wind Fairing1 x Protection StripInstallation HardwareFitting Instructions Materials used:Black Powder Coated Steel Product Dimensions:1150mm (45.3'') L x 160mm (6.3'') W x 121mm (4.8'') H Weight:2.36kg (5.2lbs)

Consists of:1 x Fridge SlideInstallation HardwareFitting Instructions Materials used:Black powder-coated steel Product Dimensions:Overall Dimensions:1002mm (39.4'') L x 591mm (23.3'') W x 88mm (3.5'') H Closed Dimensions:1002mm (39.4'') L x 591mm (23.3'') W x 88mm (3.5'') H Opened Dimensions:1902mm (74.9'') L x 591mm (23.3'') W x 88mm (3.5'') H Weight:24.96kg (55lbs) Load Rating:113kg (249lbs)

Instant Detailer with Carnauba Wax  is a spray on wax which will provide a finish to satisfy even the most dedicated motoring enthusiast.

RRSAJ1425 - 1425mm Slat Add-On Kit Consisting of: 1 x RRAC045 - Additional Tray Slat Bolts 1 x RRSS1425 - Standard Slat- 1425mm Wide Rack Approximate Installed Weight 2kg (4lbs)   Shipping Dimensions: Width 110mm (4'')Length 1430mm (56'')Height 70mm (3'')   Shipping Weight: Weight 2.4kg (5.2lbs)

Glass Cleaner with Anti-Fog & Antimicrobial  is the premier glass and window cleaner for dedicated motoring enthusiasts and professional detailers. Specially formulated to clean glass, repel fog and kill and inhibit microbial growth.

Consists of:1 x Cargo Slide/Fridge Slide Installation HardwareFitting Instructions Materials used:Black powder coated steel Product Dimensions:Overall Dimensions732mm (28.8'') L x 468mm (18.4'') W x 88mm (3.5'') H Closed Dimensions:732mm (28.8'') L x 468mm (18.4'') W x 88mm (3.5'') H Opened Dimensions:1332mm (52.4'') L x 468mm (18.4'') W x 88mm (3.5'') H Weight:14.23kg (31.4lbs) Load Rating:90kg (198lbs)

Consists of:4 x Plastic lid sliding latchesMaterials used:PlasticProduct Dimensions:Packaged:140mm (5.5) L x 100mm (3.9) W x 10mm (0.4) HSingle Sliding-Latch:40mm (1.6) L x 10mm (0.4) W x 20mm (0.8) H

KVFR004T - Fiat Ducato (L4H2/159'' WB/High Roof) (2014-Current) Slimpro Van Rack Kit - by Front Runner Consisting of:4x FAVF002 - FPCR Foot Set - by Front Runner1x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps5x RRNS1475 - Narrow Slat / 1475mm (Pair)2x SPVT004 - Van Rack Side Profile / 1762mm1x WDST013 - Wind Deflector Van Rack 30mm Lip Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Assembled Rack Kit Dimensions:3580mm (141'') L x 1565mm (61.6'') W x 127mm (5'') H Approximate Installed Weight: 40.94kg (90.26lbs) Fiat Ducato Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat. The slat T slots and side profiles take standard M8 hex bolts top and bottom. Shipping Dimensions:Width: 300mm (12'')Length: 1805mm (71'')Height: 195mm (8'')Shipping Weight:Weight: 44.35kg (98lbs)

Consists of:RRAC066 - Expedition Tubing D (525.5mm and 365.5mm) RRAC071 - Expedition Rail Corner SetRRAC072 - Expedition Rail LH RH Drop SetRRAC073 - Expedition Rail Joiner   Materials used:Powder coated Aluminium die cast jointsPowder coated 304 Stainless Steel tubing Product Dimensions:485mm (19.1'') L x 1255mm (49.4'') W x 112mm (4.4'') H   Weight:2.42kg (5.3lbs)

Consists of:1 x Ford Ranger Slimsport Rack Wind Fairing1 x Protection StripInstallation HardwareFitting Instructions Materials used:Black powder coated steel Product Dimensions:1150mm (45.3'') L x 161mm (6.3'') W x 131mm (5.2'') H Weight:2.92kg (6.4lbs)

KRSF005T - Subaru Forester Wilderness (2022-Current) Slimline Consisting of: 2x GOFR001 - Rail Foot Base (Pair)2x GORR052 - Raised Rail Outer Grips / No. 32x GORR072 - Raised Rail Inner Grips / C1x RRSTA07 - SLII Tray - 1165mm(W)X1358mm(L) Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 22.94kg (50.57lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17'') Length: 1730mm (68'') Height: 160mm (6'') Shipping Weight: Weight: 25kg (55lbs)

KRMS014T - Mahindra Scorpio (2022-Current) Slimline II Roof Rack Kit - by Front Runner Consisting of: 2x LASS106 - No 6 Leg 195mm (Pair)1x LASS107 - No 7 Leg 225mm (Pair)1x RRSTJ09 - SLII Tray - 1425mm(W)X1762mm(L) Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 35.87kg (79.08lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18'') Length: 1730mm (68'') Height: 300mm (12'') Shipping Weight: Weight: 37kg (81lbs)

KRAE001T - Audi E-TRON (2020-Current) Slimline II Roof Rail Rack Kit - by Front Runner Consisting of: 2x GOFR001 - Rail Foot Base (Pair)2x GOFR014 - Flush Rail Outer Grips / No. 62x GOFR036 - Flush Rail Inner Grips / G1x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair)1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)1x WDST010 - Wind Deflector 20mm Lip Narrow Pair /1255mm(W) Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 25.26kg (55.69lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17'') Length: 1730mm (68'') Height: 170mm (7'') Shipping Weight: Weight: 29kg (64lbs)