LANDROVER

FUEL FILTER FOR RANGE ROVER SPORT DIESEL 3.0L V6 24V 2013-2016

FUEL FILTER FOR TDV8 4.4 DIESEL RANGE ROVER L405 AND RANGE ROVER SPORT L494

Fuel Filter TDV6, Discovery 3, 4 & Range Rover Sports

The Fuel Filter attaches to the fuel line to remove particles from the fuel before it reaches the engine.

Fuel Filter, Defender 2.2LT / 2.4LT

The Fuel Filter attaches to the fuel line to remove particles from the fuel before it reaches the engine.

The Fuel Filter attaches to the fuel line to remove particles from the fuel before it reaches the engine.

FUEL TANK - DISCOVERY 3 - WHK500220 Genuine Landrover Fuel Tank. This part is brand new and is a complete unit including pump and sender.

Grease Nipple Multi Use 1/8″ BSP Straight, short.

GTB450 Td5 VNT Turbo Kit - Defender Td5 The result of six years development and testing in the harshest of environments, the GTB450 is the direct fit VNT turbo for the Td5 that works as a VNT turbo should!

GTB450 VNT Turbo Kit - Discovery Td5 The result of six years development and testing in the harshest of environments, the GTB450 is the direct fit VNT turbo for the Discovery Td5 that works as a VNT turbo should!

GTB550 Td5 VNT Turbo Kit - Defender Td5 Like our smaller GTB450, the result of six years development and testing in the harshest of environments, the GTB550 is the direct fit VNT turbo for the Td5 that not only works as a VNT turbo should, but has the capability to unleash massive power and torque!

GTB550 VNT Turbo Kit - Discovery Td5 Like our smaller GTB450, the result of six years development and testing in the harshest of environments, the GTB550 is the direct fit VNT turbo for the Td5 that not only works as a VNT turbo should, but has the capability to unleash massive power and torque!

Headlamp Bucket (Bowl) Suit 7″ Lamps  This plastic bucket kit includes the inner rim to hold the light unit in place. The headlamp outer rim is not included in the kit. Qty 2 required per car Land Rover Defender 1983 – 2006, Series 2, Series 2A, Series 3

Headlamp Sealed Beam, 7” Halogen - Land Rover Series 1, Series 2, Series 3, Defender

Headlamp, 7″ Sealed Beam - Land Rover Series 1, Series 2, Series 3, Defender

Defender Heater Vents Sold as a pair. For models after 1989 chassis number FA453192

Heavy Duty Rear Axle Kit - Defender (1999 - 2015) Kit includes two brand new aftermarket axles| new heavy duty drive flanges| flange gaskets| hub seals| lock washers and lock nuts to convert the rear bearings to an adjustable setup.

Uprated rear anti roll bar conversion kit, for the Land Rover Defender 110. Designed & tested to deliver the precise torsional stiffness required to keep a Defender upright, and yet still deliver a forgiving ride. Our German made anti roll bar is supplied complete with SuperPro bushes, to help give your Land Rover a much sharper turn in, and give you much more confidence on the road. Also available for the Defender 90.

Housing for the top hose to engine block sits in the middle of the valley on a Tdv6 engine on Range Rover Sport & Land Rover Discovery 3 & 4 2.7 & 3.0L Tdv6 Pt no. LR073372 (GENUINE) This is a brand new  Genuine Thermostat Housing Water Outlet Kit - Range Rover Sport, fitted with the 2.7 litre TDV6 and 3.0 litre TDV6 engines, built from 2005 onwards. - Land Rover Discovery 3 and Discovery 4 fitted with the 2.7 litre TDV6 and 3.0 litre TDV6 engines, built from 2005 to 2016 runout.

Ignition Condenser (LUCAS) - Defender , Range Rover Classic , Land Rover Series 2, 2A, 3

Key / Remote Pad Cover Discovery 3 and 4 Replaces worn pad on key

Key / Remote Pad Cover Range Rover Replaces worn pad on key

Consists of:1 x Front Runner Drawer unit (SSDR002)1 x Land Rover All-New Discovery Deck Completion Set2 x Push to Close latch with 2 keys per lock3 x Accessory Channels6 x Eye Nuts for Accessory Channel1 x T Wrench with 1 custom sockets for wheel winderInstallation Hardware including 4 turnbuckles to secure unit to vehicleFitting InstructionMaterials used:Aluminum - Accessory Channels Sub FrameBlack powder coated steel - Drawer Bins FrameCarpet Laminated plywood - Top Deck Deck SetProduct Dimensions:Overall Dimensions:974mm (38.3'') L x 1324mm (52.1'') W x 330mm (13'') HInterior Drawer Dimensions:Left Hand Drawer:914mm (36'') L x 461mm (18.2'') W x 208mm (8.2'') HRight Hand Drawer:914mm (36'') L x 373mm (14.7'') W x 208mm (8.2'') HWeight:82.4kg (181.7lbs)Load Rating:113Kg (250lbs) per DrawerSpecial Notes:Supplied with a T-wrench and custom socket for operating the wheel winder through the drawer system.

Land Rover Clip-snap-sack (EYC101460) part for Discovery 1 1989 - 1998 (from Fa393361 To Wa799999) Classic, Discovery 2 1998 - 2004 Classic, Freelander 1996 - 2006 Classic, Range Rover 1994 - 2001 Classic, Range Rover Classic 1992 - 1994 (from Ja610294) Classic.

Consists of:2x Large light protectors4x Small light protectors12x Self tapping screwsMaterials used:Black plastic-coated high strength steel

Consists of:1xAluminium gullwing door assembly1x Outer frame1x Fastening kit2x Gas struts1x Right side inner bracket1x Left side inner bracket1x Top inner bracket1x Bottom inner bracketMaterials used:Black powder-coated 3mm aluminiumBlack powder-coated 2mm mild steel reinforcement plateBlack powder-coated high strength steelProduct Dimensions:Overall: L 1120mm (44.1) x W 50mm (2) x H 490mm (19.3)Door Panel: L 1044mm (41.1) x H 414mm (16.3)Weight:15.5kg (34.2lbs)

Consists of:1x Glass gullwing door assembly1x Outer frame1x Fastening kit2x Gas struts1x Right side inner bracket1x Left sideinner bracket1x Top inner bracket1x Bottom inner bracketMaterials used:6mm Toughened glass with tinted laminateBlack powder-coated high strength steelProduct Dimensions:Overall: L 1120mm (44.1) x W 50mm (2) x H 490mm (19.3)Door Panel: L 1044mm (41.1) x H 414mm (16.3)Weight:15kg (33.1lbs) Glass specifications: Visible Light:Transmission: 44Reflection Outside: 5 Solar Energy:Total Elimination: 38Reflection Outside: 5Absorption 1: 47Direct Transmission: 47SHGC: 0.62 Shading Coefficient:Ratio: 0.71 U Value:(W/m2).K (Center of Glass): 5.8

N/D

KRLD024 - Land Rover Defender (1983-2016) Load Bar Kit / Gutter Mount - by Front Runner Consisting of: 2 x LASS107 - No 7 Leg 225mm (Pair) - by Front Runner 1 x LBSK016 - Roof Load Bar Pair 1425mm(W) - by Front Runner 1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner   Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight 8kg (18lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8'') to the height of the Foot or Grab-On Foot Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8'') to the height of the Legs listed above to determine the height of the rack from your vehicle’s rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8'') to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.   Shipping Dimensions: Width 130mm (5'')Length 1540mm (61'')Height 195mm (8'')   Shipping Weight: Weight 9.5kg (21.0lbs)

Coming Soon!

Consists of:1 x Side Mount Jerry Can HolderInstallation HardwareFitting Instruction Materials used:Black powder coated high strength steel Product Dimensions:230mm (9.1'') L x 385mm (15.2'') W x 711mm (28'') H Weight:5.5kg (12.1lbs)

KRLDT01L - Land Rover Defender (1983-2016) Slimline II 1/2 Roof Rack Kit / Tall - by Front Runner Consisting of: 3x LASS108 - No 8 Leg 250mm (Pair)1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 31.48kg (69.4lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 450mm (18'')Length: 1730mm (68'')Height: 140mm (6'')Shipping Weight:Weight: 31.48kg (69lbs)

Consists of:1x Under console safe2x Keys supplied Materials used:Black powder-coated mild steelCarpeted base Product Dimensions:433mm (17.1'') L x 275mm (10.8'') W x H 100mm (3.9'') Internal Dimensions:375mm (14.8'') L x 265mm W (10.4'') (Raised section)/205mm (8.1'') W (Lower Section) x 107mm (4.2'') H Weight:3.2kg (7.1lbs)

KRLD009L - Land Rover Defender Single Cab (1983-2016) Pick-Up Truck Slimline II Roof Rack Kit Consisting of: 2 x LASS104 - No 4 Leg 170mm (Pair) - by Front Runner 1 x RRSTJ04 - Slimline II Tray - 1425mm(W) X 752mm(L) - by Front Runner   Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight 19kg (41lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.   Shipping Dimensions: Width 450mm (18'')Length 1615mm (64'')Height 140mm (6'')   Shipping Weight: Weight 21.9kg (48.2lbs)

Consists of: 2x Large light protectors4x Small light protectors12x Self tapping screwsMaterials used:Black plastic-coated high strength steelWeight:1.1kg (2.4lbs)

Consists of: 2x Large light protectors4x Small light protectors12x Self tapping screwsMaterials used:Black plastic-coated high strength steelWeight:1.1kg (2.4lbs)

Coming Soon!

KRLD035T - Land Rover Defender 110 (1983-2016) Slimline II 3/4 Roof Rack Kit - by Front RunnerConsisting of: 4x LASS107 - No 7 Leg 225mm (Pair)1x RRSTJ11 - SLII Tray - 1425mm(W)X2166mm(L)1x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 42.74kg (94.23lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17'')Length: 1720mm (68'')Height: 280mm (11'')Shipping Weight:Weight: 43.4kg (95lbs)

KRLD030L - Land Rover Defender 110 (1983-2016) Slimline II 3/4 Roof Rack Kit / Tall - by Front Runner Consisting of: 4x LASS108 - No 8 Leg 250mm (Pair)1x RRSTJ11 - SLII Tray - 1425mm(W)X2166mm(L) Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 34.1kg (75.18lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18'') Length: 1730mm (68'') Height: 140mm (6'') Shipping Weight: Weight: 40.48kg (89lbs)

KRLD003L - Land Rover Defender 110 (1983-2016) Slimline II Roof Rack Kit - by Front Runner Consisting of: 4 x LASS107 - No 7 Leg 225mm (Pair) - by Front Runner 1 x RRSTJ14 - Slimline II Tray - 1425mm(W) X 2772mm(L) - by Front Runner   Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight 42kg (92lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.   Shipping Dimensions: Width 450mm (18'')Length 1615mm (64'')Height 140mm (6'')   Shipping Weight: Weight 48.8kg (107.3lbs)

KRLDT03L - Land Rover Defender 110 (1983-2016) Slimline II Roof Rack Kit / Tall - by Front Runner Consisting of: 4 x LASS108 - No 8 Leg 250mm (Pair) - by Front Runner 1 x RRSTJ14 - Slimline II Tray - 1425mm(W) X 2772mm(L) - by Front Runner   Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight 42kg (93lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.   Shipping Dimensions: Width 450mm (18'')Length 1615mm (64'')Height 140mm (6'')   Shipping Weight: Weight 49.0kg (107.8lbs)

KRLD042T - Land Rover Defender 110 L663 (2020-Current) Slimline II Roof Rack Contour Kit Consisting of:1x FALD012 - Land Rover Defender L663 (2020-Cur) Contour Rail1x RRSTD09 - SLII Tray - 1255mm(W)X1762mm(L) Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 27.7kg (61.07lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 450mm (18'')Length: 1720mm (68'')Height: 275mm (11'') Shipping Weight:Weight: 32kg (70lbs)

Materials used: BPA-free polyethyleneDimensions (mm): Slanted from 560W to 380W x 270H x 310L

Materials used: BPA-free polyethyleneDimensions (mm): Slanted from 560W to 370W x 320H x 315L

KRLD005L - Land Rover Defender 110/130 (1983-2016) Slimline II 1/2 Roof Rack Kit - by Front Runner Consisting of: 3 x LASS107 - No 7 Leg 225mm (Pair) - by Front Runner 1 x RRSTJ08 - Slimline II Tray - 1425mm(W) X 1560mm(L) - by Front Runner   Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight 31kg (68lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.   Shipping Dimensions: Width 450mm (18'')Length 1615mm (64'')Height 140mm (6'')   Shipping Weight: Weight 35.8kg (78.8lbs)

KRLDT05L - Land Rover Defender 110/130 (1983-2016) Slimline II 1/2 Roof Rack Kit / Tall - by Front Runner Consisting of: 3 x LASS108 - No 8 Leg 250mm (Pair) - by Front Runner 1 x RRSTJ08 - Slimline II Tray - 1425mm(W) X 1560mm(L) - by Front Runner   Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight 29kg (64lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.   Shipping Dimensions: Width 450mm (18'')Length 1615mm (64'')Height 140mm (6'')   Shipping Weight: Weight 33.8kg (74.3lbs)

Create the cargo room you need with the Land Rover Defender 130 (1983-2016) Slimline II Load Bed Rack Kit - by Front Runner. This load bed rack kit allows you to load up gear and Front Runner's compatible accessories above your truck bed, maintaining valuable space in the bed. And engineered off-road tough, the kit will stay with you for countless challenging adventures.

N/D

KRLD007L - Land Rover Defender 90 (1983-2016) Slimline II Roof Rack Kit - by Front Runner Consisting of: 4x LASS107 - No 7 Leg 225mm (Pair)1x RRSTJ10 - SLII Tray - 1425mm(W)X1964mm(L) Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 39.8kg (87.74lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18'') Length: 1615mm (64'') Height: 140mm (6'') Shipping Weight: Weight: 38.28kg (84lbs)

KRLDT07L - Land Rover Defender 90 (1983-2016) Slimline II Roof Rack Kit / Tall - by Front Runner Consisting of: 4 x LASS108 - No 8 Leg 250mm (Pair) - by Front Runner1 x RRSTJ10 - Slimline II Tray - 1425mm(W) X 1964mm(L) - by Front Runner   Material used: Black epoxy powder-coated T6 aluminiumHigh strength steel Approximate Installed Weight 35kg (78lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 450mm (18'')Length 1615mm (64'')Height 140mm (6'') Shipping Weight: Weight 41.0kg (90.2lbs)

Equip your Land Rover Defender 90 for any adventure with the Slimline II Roof Rack Contour Kit. Engineered to get your Defender through the world’s roughest terrain while complimenting the sleek design, the Contour Rails feature an opening which allows access to a Front Runner under-rack mounted Pro Stainless Steel Prep Table.

BPLD017 - Land Rover Defender 90/110 (1983-2016) Fender Protector / Black - by Front Runner Consisting of: Material Used: Black epoxy powder - coated T6 aluminium Approximate Installed Weight: 2.2kg (4.85lbs) Shipping Dimensions: Width: 380mm (15'') Length: 1130mm (44'') Height: 35mm (1'') Shipping Weight: Weight: 2.2kg (5lbs)

Consists of:1 x Main Ladder1 x Bottom StepInstallation HardwareFitting Instructions Materials used:Black powder coated high strength steel Product Dimensions:130mm (5.1'') L x 235mm (9.3'') W x 716mm (28.2'') H Weight:5.4kg (11.9lbs)

Consists of:1 x Land Rover Defender 90 110 (1983-2016) LadderInstallation HardwareFitting Instructions Materials used:Black Powder coated steel aluminium Product Dimensions:155mm (6.1'') L x 230mm (9.1'') W x 721mm (28.4'') H Weight:4.51kg (9.9lbs)

Consists of:1 x Base Drawer unit with 1 Drawer1 x Deck Completion Set1 x Push to close latch with 2 keys2 x Drawer specific Drawer DividersInstallation HardwareFitting Instruction Materials used:Aluminum - Sub FrameBlack powder coated steel - Drawer Bins, Drawer Dividers FrameCarpet Laminated plywood - Top Deck Product Dimensions:1095mm (43.1'') L x 1136mm (44.7'') W x 219mm (8.6'') H Internal Drawer Dimensions:1000mm (39.4'') L x 650mm (25.6'') W x 164mm (6.5'') H Weight:72kg (158.7lbs) Load Rating:150Kg (330lbs) Special Notes:Items can be secured to the top deck with screws or drilled and bolted through.

Consists of:1 x Gas Bottle Frame 1 x Gas Bottle Base Plate1 x Adjustable Gas Bottle ClampInstallation HardwareFitting Instruction Materials used:Black powder coated high strength steel Assembled Product Dimensions: 341mm (13.4'') L x 294mm (11.5'') W x 621mm (24.4'') H Weight: 5.4kg (11.9lbs)Suitability: Holds gas bottles ranging from 210mm (8.3'') to 290mm('') in diameter

Consists of:1 x Base Drawer unit with 1 Drawer1 x Push to close latch with 2 keys2 x Drawer specific Drawer DividersInstallation hardwareFitting InstructionMaterials used:Aluminum - Sub FrameBlack powder coated steel - Drawer Bins, Drawer Dividers FrameCarpet Laminated plywood - Top DeckProduct Dimensions:1110mm (43.7'') L x 910mm (35.8'') W x 215mm (8.5'') HInternal Drawer Dimensions:1000mm (39.4'') L x 650mm (25.6'') W x 164mm (6.5'') HWeight:60.4Kg (133.2lbs)Load Rating: 150Kg (330lbs)Special Notes:Items can be secured to the top deck with screws or drilled and bolted through.

Consists of:1x Fastening Kit2x Pinch Welds2x Side Panels - 1 Left, 1 Right2x Mounting Brackets1x Top Panel2x Wooden Back Board1x Bottom PanelMaterials used:Black powder coated steelBack Board: Stained PlywoodProduct dimensions:860mm (33.9'') W x 310mm (12.2'') L x 654mm (25.8'') H (Box)860mm (33.9'') W x 310mm (12.2'') L x 746mm (29.4'') H (Overall incl. Brackets)Weight:13.1kg (28.9lbs)

Consists of:1x Mild steel wood Shelf1x Installation Kit Material used:Shelf: Stained PlywoodShelf Support: Black powder-coated mild steel Product dimensions:264mm (10.4'') L x 856mm (33.7'') W x 36mm (1.4'') H Weight:3.8kg (8.4lbs)

The edge of the Defender seat box is prone to damage, protect that edge and smarten up your interior with these protectors. Made from 2mm stainless steel and CNC cut for accuracy. Less than 5 minutes to fit and all you need is a drill for the fixings. Kit includes a pair of corner protectors and steel self drill fixings.

The edge of the Defender seat box is prone to damage, protect that edge and smarten up your interior with these protectors. Made from 2mm stainless steel and CNC cut for accuracy. Less than 5 minutes to fit and all you need is a drill for the fixings. Kit includes a pair of corner protectors and steel self drill fixings. These will also fit a Series 2 & 3 but will require matching drilling to accommodate seat rail fixing.

Consists of:1 x Spare StrapMaterials used:Black powder coated high strength steelProduct Dimensions:385mm (15.2'') L x 38mm (1.5'') W x 112mm (4.4'') HWeight:318g (11.2oz)

Consists of:1 x Aluminum Guard Plate1 x Pair of BracketsInstallation HardwareFitting InstructionsMaterials used:6mm Aluminum plate Black powder coated 8mm mild steelProduct Dimensions:373.5mm (14.7) L x 750mm (29.5) W x 252mm (9.9) H (Including brackets)Weight:18.5kg (40.8lbs)Special Notes:Fits the Land Rover Defender 90 110 series

Consists of: 1x Fastening Kit 2x Pinch Welds2x Side Panels - 1 Left, 1 Right2x Mounting Brackets1x Top Panel2x Wooden Back Panels1x Bottom Panel Materials used: Black powder-coated mild steel Product Dimensions: L 255mm (10)x W 1000mm (39.4)x H 654mm (25.8) Weight: 13.1kg (28.9lbs)

Consists of:1x Wooden shelf1x Mild steel frame1x Fastening Kit   Material used:Shelf: Stained PlywoodFrame: Black powder-coated mild steel   Product dimensions:209mm (8.2'') L x 997mm (39.3'') W x 36mm (1.4'') H   Weight:3.8kg (8.4lbs)

N/D

Land Rover Defender / Discovery 1 HD Maxi-Drive Flange Set Land Rover HD MaxiDrive Probally one of the best HD Drive Flangers On The Market Today. Price is Per Pair Suits All Defender Front And Rear on Standard Axles.  To suit: Land Rover Defenders 1994 Onwards With Disk Brakes All Round Land Rover Discovery 1

Land Rover Defender/Discovery TD5 Air Filter Mahle LR027408

Fits ALL DEFENDERS, DISCOVERY 1 1989 - 1998 and RANGE ROVER CLASSIC. Increase the body clearance to allow the fitment of really big tyres as well as provide an additional 50mm of lift to your suspension. These simple spacers bolt between the coil spring and the axle and can be the perfect way to lift the vehicle to the desired ride height when the load or equipment carried exceeds even the heaviest rated coil springs.

Consists of:1 x Assembled ladder1 x Z-bracketBolt kitMaterials used:304 Stainless steelElectroplated and black powder coatedWeight:4kg (8.8lbs)

For Discovery 2’s with rear air suspension this simple kit will increase ground clearance and tyre to body clearance. If the rear air springs are to be retained to maintain the self-levelling facility these spacer kits are the perfect solution for achieving a 50mm lift. The front kit compliments the rear perfectly.

LAND ROVER DISCOVERY 3 & 4 AND RANGE ROVER SPORT CASTOR BUSHES The castor bush is made from a metal outer case and rubber insert. This bush will stop suspension rattle and will allow a one time only replacement. Sold as a pair.

Consists of:1 x Front Runner Drawer unit (SSDR002)1 x Land Rover Discovery LR3 LR4 Drawer Deck Completion Set2 x Push to Close latch with 2 keys per lock3 x Accessory Channels6 x Eye Nuts for Accessory Channel1 x T Wrench with 2 custom sockets for wheel winderInstallation Hardware including 4 turnbuckles to secure unit to vehicleFitting InstructionMaterials used:Aluminum - Accessory Channels Sub FrameBlack powder coated steel - Drawer Bins FrameCarpet Laminated plywood - Top Deck Deck SetProduct Dimensions:Closed:972mm (38.3) L x 1230mm (48.4) W x 328mm (12.9) HOpen:1896mm (74.7) L x 1230mm (48.4) W x 328mm (12.9) HInterior Drawer Dimensions:Left Hand Drawer:914mm (36) L x 461mm (18.2) W x 208mm (8.2) HRight Hand Drawer:914mm (36) L x 373mm (14.7) W x 208mm (8.2) HWeight:80.3Kg (177lbs)Load Rating:113Kg (250lbs) per DrawerSpecial Notes:Supplied with a T-wrench and 2 custom sockets for operating the wheel winder through the drawer system.

Consists of:1 x Sump Guard4 x Rubber Spacer2 x Aluminium Spacers2 x Mounting BracketsMaterials used:Plate: 6mm AluminiumBracket: Black powder coated 8mm high strength steelProduct Dimensions:735mm (29'') L x 750mm (29.5'') WWeight:8kg (17.6lbs)

Consists of:1 x Drawer base unit (SSDR003)1 x Land Rover Discovery Sport Deck Completion Set2 x Push to close latch with 2 keys per lock 3 x Accessory channels6 x Eye Nuts for accessory channelsInstallation HardwareFitting InstructionMaterials used:Aluminum - Accessory Channels Sub FrameBlack powder coated steel - Drawer Bins FrameUV resistant nylon Carpet Laminated Plywood - Top Deck Side DeckProduct Dimensions:857mm (33.7) L x 1215mm (47.8) W x 331mm (13) HInterior Drawer Dimensions:Left Hand Drawer:717mm (28.2) L x 348mm (13.7) W x 210mm (8.3) HRight Hand Drawer:717mm (28.2) L x 448mm (17.6) W x 210mm (8.3) HWeight:72.42kg (159.7lbs)Load Rating:113Kg (250lbs) per DrawerSpecial Notes:3 Drawer Dividers (SSCA048) can fit each Drawer