RACKS

KRGM007T - GWM M4 (2014-Current) Slimline II Roof Rack Kit - by Front Runner Consisting of:2 x GOFR001 - Rail Foot Base (Pair) - by Front Runner 2 x GORR052 - Raised Rail Outer Grab-On / No. 3 - by Front Runner 2 x GORR070 - Raised Rail Inner Grab-On / A - by Front Runner 1 x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair) 1 x RRSTA06 - Slimline II Tray - 1165mm(W) X 1156mm(L) - by Front Runner 1 x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair / 1165mm(W) - by Front Runner Material used:Black epoxy powder-coated T6 aluminium High strength steelApproximate Installed Weight 20kg (43lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2) to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width455mm (18)Length1610mm (63)Height 285mm (11)Shipping Weight:Weight22.8kg (50.1lbs)

KRGP002T - GWM P Series (2020-Current) Slimline II Load Bed Rack Kit - by Front Runner Consisting of: 3x LASS026 - Universal Load Bed Leg / Tall (Pair)1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L)1x TRBU002 - Pick-Up Load Bed Tracks / 1200mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 66.2kg (145.95lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17'')Length: 1730mm (68'')Height: 280mm (11'')Shipping Weight:Weight: 33.2kg (73lbs)

KRGP001T - GWM P Series (2020-Current) Slimline II Roof Rack Kit Consisting of: 1x FAGP001 - GWM P Series (2019 - Current) Foot Rail1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L) Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 25.06kg (55.25lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 445mm (18'') Length: 1730mm (68'') Height: 245mm (10'') Shipping Weight: Weight: 30.2kg (66lbs)

KRGS001T - GWM Steed 6 (2018-Current) Slimline II Roof Rack Kit - by Front Runner Consisting of:2 x GOFR001 - Rail Foot Base (Pair) - by Front Runner 2 x GORR053 - Raised Rail Outer Grab-On / No. 4 - by Front Runner 2 x GORR072 - Raised Rail Inner Grab-On / C - by Front Runner 1 x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair) 1 x RRSTA06 - Slimline II Tray - 1165mm(W) X 1156mm(L) - by Front Runner 1 x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair / 1165mm(W) - by Front Runner Material used:Black epoxy powder-coated T6 aluminium High strength steelApproximate Installed Weight 20kg (43lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2) to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width455mm (18)Length1610mm (63)Height 285mm (11)Shipping Weight:Weight22.8kg (50.2lbs)

KRGT001T - GWM Tank 300 (2023- Current) Slimline II Roof Rail Rack KitConsisting of: 3x GOFR001 - Rail Foot Base (Pair)3x GORR053 - Raised Rail Outer Grips / No. 43x GORR072 - Raised Rail Inner Grips / C1x RRSTG08 - SLII Tray - 1345mm(W)X1560mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 25.72kg (56.7lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18'')Length: 1720mm (68'')Height: 170mm (7'')Shipping Weight:Weight: 30kg (66lbs)

Consists of:4 x Tent Brackets4 x James Baroud Channel Plates4 x Auto Home Channel PlatesInstallation HardwareFitting Instructions Materials used:Black powder coated steel Product Dimensions: (Per Bracket)140mm (5.5'') L x 23.5mm (0.9'') W x 81mm (3.2'') H Weight: (Per Pair of Brackets)1.6kg (3.5lbs)

KRHH002T - Haval H1 (2014-Current) Slimline II Roof Rack Kit - by Front Runner Consisting of:2 x GOFR001 - Rail Foot Base (Pair) - by Front Runner 2 x GORR052 - Raised Rail Outer Grab-On / No. 3 - by Front Runner 2 x GORR070 - Raised Rail Inner Grab-On / A - by Front Runner 1 x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair) 1 x RRSTA05 - Slimline II Tray - 1165mm(W) X 954mm(L) - by Front Runner 1 x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair / 1165mm(W) - by Front Runner Material used:Black epoxy powder-coated T6 aluminium High strength steelApproximate Installed Weight 18kg (40lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2) to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width455mm (18)Length1610mm (63)Height 285mm (11)Shipping Weight:Weight20.9kg (46.0lbs)

KRHH003T - Haval H2 (2016-Current) Slimline II Roof Rack Kit Consisting of:2 x GOFR001 - Rail Foot Base (Pair) - by Front Runner 2 x GOFR014 - Flush Rail Outer Grips / No. 6 - by Front Runner 2 x GOFR035 - Flush Rail Inner Grips / F - by Front Runner 1 x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair) 1 x RRSTA07 - Slimline II Tray - 1165mm(W) X 1358mm(L) - by Front Runner 1 x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair / 1165mm(W) - by Front Runner Material used:Black epoxy powder-coated T6 aluminium High strength steelApproximate Installed Weight 21kg (46lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2) to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width455mm (18)Length1610mm (63)Height 285mm (11)Shipping Weight:Weight24.4kg (53.7lbs)

KRHH004T - Haval H6C (2018-Current) Slimline II Roof Rack Kit - by Front Runner Consisting of:2 x GOFR001 - Rail Foot Base (Pair) - by Front Runner 2 x GOFR014 - Flush Rail Outer Grips / No. 6 - by Front Runner 2 x GOFR035 - Flush Rail Inner Grips / F - by Front Runner 1 x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair) 1 x RRSTA07 - Slimline II Tray - 1165mm(W) X 1358mm(L) - by Front Runner 1 x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair / 1165mm(W) - by Front Runner Material used:Black epoxy powder-coated T6 aluminium High strength steelApproximate Installed Weight 21kg (46lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2) to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width455mm (18)Length1610mm (63)Height 285mm (11)Shipping Weight:Weight24.4kg (53.7lbs)

KRHH005T - Haval H9 (2015-Current) Slimline II Roof Rail Rack Kit - by Front Runner Consisting of: 2x GOFR001 - Rail Foot Base (Pair)2x GORR053 - Raised Rail Outer Grips / No. 42x GORR072 - Raised Rail Inner Grips / C1x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair)1x RRSTA07 - SLII Tray - 1165mm(W)X1358mm(L)1x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair /1165mm Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 23.93kg (52.76lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 455mm (18'') Length: 1730mm (68'') Height: 285mm (11'') Shipping Weight: Weight: 24.73kg (54lbs)

KRHJ001T - Haval Jolion (2020-Current) Slimline II Roof Rail Rack Kit - by Front Runner Consisting of: 2x GOFR001 - Rail Foot Base (Pair)2x GOFR015 - Flush Rail Outer Grips / No. 72x GOFR034 - Flush Rail Inner Grips / E2x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair)1x RRSTA07 - SLII Tray - 1165mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 23.68kg (52.21lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17'')Length: 1730mm (68'')Height: 165mm (6'')Shipping Weight:Weight: 25kg (55lbs)

Consists of: 1x Handle bracket 1x Base bracket Bolt kit   Materials used: Black powder-coated steel   Weight: 2.1kg (4.63lbs)

Consists of:1 x Handle bracket1 x Base bracketInstallation HardwareFitment Instructions Material used:Black powder coated high strength steel Product Dimensions:Handle Bracket:155mm (6.1'') L x 85mm (3.4'') W x 110mm (4.3'') H Base Bracket:69mm (2.1'') L x 207mm (8.2'') W x 115mm (4.5'') H Weight:2.34kg (5.2lbs)

KRHC001T - Holden Colorado/GMC Canyon DC (2012-Current) Slimline II Roof Rack Kit - by Front Runner Consisting of:1 x FAIK001 - Isuzu D-Max Foot Rails - by Front Runner 1 x RRSTA07 - Slimline II Tray - 1165mm(W) X 1358mm(L) - by Front Runner Material used:Black epoxy powder-coated T6 aluminium High strength steelApproximate Installed Weight 24kg (52lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2) to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width630mm (25)Length1640mm (65)Height 160mm (6)Shipping Weight:Weight27.5kg (60.4lbs)

KRRT017T - HSP Electric Roll R Cover Slimline II Load Bed Rack Kit / 1425(W) X 1358(L) - by Front Runner Consisting of: 2x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L)1x TRCA009 - Canopy Tracks / 1400mm (L) Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 30.38kg (66.98lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18'') Length: 1730mm (68'') Height: 260mm (10'') Shipping Weight: Weight: 30.52kg (67lbs)

KRHL001T - HSP Silverback HardLid SLII LB Rack Kit/1255x1156 Consisting of: 2 x FASS013 - Foot Set / 60mm-70mm - by Front Runner1 x RRSTD06 - Slimline II Tray - 1255mm(W) X 1156mm(L) - by Front Runner1 x TRCA003 - Canopy Tracks / 1150mm(L) - by Front Runner   Material used: Black epoxy powder-coated T6 aluminiumHigh strength steel Approximate Installed Weight 21kg (47lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.   Shipping Dimensions: Width 450mm (18'')Length 1610mm (63'')Height 260mm (10'')   Shipping Weight: Weight 24.6kg (54.2lbs)

KRHU001T - Hummer H3 Slimline II Roof Rack Kit - by Front Runner Consisting of: 1 x FASS011 - Stud Plate Kit / Large Set of 12 - by Front Runner3 x FASS012 - Foot Set / 40mm-50mm - by Front Runner1 x RRSTG08 - Slimline II Tray - 1345mm(W) X 1560mm(L) - by Front Runner Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 27.5kg (60.7lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot, Grab-on Foot or Strap-On Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 450mm (18.0'')Length: 1615mm (64.0'')Height: 140mm (6.0'') Shipping Weight:31.9kg (70.0lbs)

KRHUT01T - Hummer H3 Slimline II Roof Rack Kit / Tall - by Front Runner Consisting of: 1 x FASS011 - Stud Plate Kit / Large Set of 12 - by Front Runner3 x FASS013 - Foot Set / 60mm-70mm - by Front Runner1 x RRSTG08 - Slimline II Tray - 1345mm(W) X 1560mm(L) - by Front Runner Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 28.0kg (61.7lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot, Grab-on Foot or Strap-On Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 450mm (18.0'')Length: 1615mm (64.0'')Height: 140mm (6.0'') Shipping Weight:32.3kg (71.0lbs)

KRHC002T - Hyundai Creta 1st Gen (2014-2019) Slimline II Roof Rail Rack Kit - by Front Runner Consisting of: 2x GOFR001 - Rail Foot Base (Pair)2x GORR051 - Raised Rail Outer Grips / No. 22x GORR071 - Raised Rail Inner Grips / B1x RRSTA06 - SLII Tray - 1165mm(W)X1156mm(L)1x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair /1165mm Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 21.76kg (47.97lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 455mm (18'') Length: 1730mm (68'') Height: 285mm (11'') Shipping Weight: Weight: 22.83kg (50lbs)

KRHI001T - Hyundai I20 Active (2015-Current) Slimline II Roof Rack Kit - by Front Runner Consisting of:2 x GOFR001 - Rail Foot Base (Pair) - by Front Runner 2 x GORR052 - Raised Rail Outer Grab-On / No. 3 - by Front Runner 2 x GORR072 - Raised Rail Inner Grab-On / C - by Front Runner 1 x RRSTA06 - Slimline II Tray - 1165mm(W) X 1156mm(L) - by Front Runner 1 x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair / 1165mm(W) - by Front Runner Material used:Black epoxy powder-coated T6 aluminium High strength steelApproximate Installed Weight 20kg (43lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2) to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width455mm (18)Length1610mm (63)Height 285mm (11)Shipping Weight:Weight22.8kg (50.2lbs)

KRHI002T - Hyundai IX35 (2009-2015) Slimline II Roof Rack Kit - by Front Runner Consisting of:2 x GOFR001 - Rail Foot Base (Pair) - by Front Runner 2 x GORR052 - Raised Rail Outer Grab-On / No. 3 - by Front Runner 2 x GORR072 - Raised Rail Inner Grab-On / C - by Front Runner 1 x RRSTA06 - Slimline II Tray - 1165mm(W) X 1156mm(L) - by Front Runner 1 x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair / 1165mm(W) - by Front Runner Material used:Black epoxy powder-coated T6 aluminium High strength steelApproximate Installed Weight 20kg (43lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2) to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width455mm (18)Length1610mm (63)Height 285mm (11)Shipping Weight:Weight22.8kg (50.2lbs)

KRHK001T - Hyundai Kona(2018-Current)SLII Roof Rail Rack Kit Consisting of: 2x GOFR001 - Rail Foot Base (Pair)2x GOFR012 - Flush Rail Outer Grips / No. 32x GOFR032 - Flush Rail Inner Grips / C1x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair)1x RRSTA06 - SLII Tray - 1165mm(W)X1156mm(L)1x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair /1165mmMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 22.64kg (49.91lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17'')Length: 1720mm (68'')Height: 150mm (6'')Shipping Weight:Weight: 22.4kg (49lbs)

KRHS001T - Hyundai Santa Fe (2017-Current) Slimline II Roof Rack Kit - by Front Runner Consisting of: 2 x GOFR001 - Rail Foot Base (Pair) - by Front Runner 2 x GOFR014 - Flush Rail Grab-On Outer Grips / No. 6 - by Front Runner 2 x GOFR032 - Flush Rail Grab-On Inner Grips / C - by Front Runner 1 x RRSTD05 - Slimline II Tray - 1255mm(W) X 954mm(L) - by Front Runner Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight 18kg (40lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicles rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width450mm (18'')Length1615mm (64'')Height 270mm (11'') Shipping Weight: Weight21.0kg (46.2lbs)

KRHT005T - Hyundai Tucson (2004-2009) Slimline II Roof Rack Kit - by Front Runner Consisting of:2 x GOFR001 - Rail Foot Base (Pair) - by Front Runner 2 x GORR051 - Raised Rail Outer Grab-On / No. 2 - by Front Runner 2 x GORR070 - Raised Rail Inner Grab-On / A - by Front Runner 1 x RRSTA06 - Slimline II Tray - 1165mm(W) X 1156mm(L) - by Front Runner 1 x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair / 1165mm(W) - by Front Runner Material used:Black epoxy powder-coated T6 aluminium High strength steelApproximate Installed Weight 20kg (43lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2) to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width455mm (18)Length1610mm (63)Height 285mm (11)Shipping Weight:Weight22.8kg (50.1lbs)

KRHT004T - Hyundai Tucson (2016-2020) Slimline II Roof Rack Kit - by Front Runner Consisting of: 2 x GOFR001 - Rail Foot Base (Pair) - by Front Runner 2 x GOFR014 - Flush Rail Grab-On Outer Grips / No. 6 - by Front Runner 2 x GOFR030 - Flush Rail Grab-On Inner Grips / A - by Front Runner 1 x RRSTD06 - Slimline II Tray - 1255mm(W) X 1156mm(L) - by Front Runner   Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight 20kg (45lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.   Shipping Dimensions: Width 450mm (18'')Length 1615mm (64'')Height 270mm (11'')   Shipping Weight: Weight 23.7kg (52.1lbs)

KRIG002T - Ineos Grenadier (2022-Current) Slimline II 3/4 Roof Rack Kit Consisting of:4x LASS040 - Leg Spacer 10mm (Pair)4x LASS047 - Ineos Grenadier Mounting Leg / 225mm (Pair)1x RRSTP10 - SLII Tray - 1575mm(W)X1964mm(L) Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 40.18kg (88.58lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 450mm (18'')Length: 1730mm (68'')Height: 295mm (12'') Shipping Weight:Weight: 44kg (97lbs)

KRIG001T - Ineos Grenadier (2022-Current) SLII Roof Rack Kit Consisting of:5x LASS040 - Leg Spacer 10mm (Pair)5x LASS047 - Ineos Grenadier Mounting Leg / 225mm (Pair)1x RRSTP13 - SLII Tray - 1575mm(W)X2570mm(L) Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 50.33kg (110.96lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 450mm (18'')Length: 1730mm (68'')Height: 295mm (12'') Shipping Weight:Weight: 52kg (114lbs)

KRIG004T - Ineos Grenadier Quartermaster (2023-Current) Slimline II 1/2 Roof Rack Kit Consisting of:3x LASS040 - Leg Spacer 10mm (Pair)3x LASS047 - Ineos Grenadier Mounting Leg / 225mm (Pair)1x RRSTP05 - SLII Tray - 1575mm(W)X954mm(L) Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 24.82kg (54.72lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 445mm (18'')Length: 1720mm (68'')Height: 295mm (12'') Shipping Weight:Weight: 30kg (66lbs)

KRIG003T - Ineos Grenadier Quartermaster (2023-Current) Slimline II Roof Rack Kit Consisting of:4x LASS040 - Leg Spacer 10mm (Pair)4x LASS047 - Ineos Grenadier Mounting Leg / 225mm (Pair)1x RRSTP08 - SLII Tray - 1575mm(W)X1560mm(L) Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 34.98kg (77.12lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 445mm (18'')Length: 1720mm (68'')Height: 295mm (12'') Shipping Weight:Weight: 40kg (88lbs)

Consists of:2 x Inter-Slat Brackets2 x Slat End CapsInstallation HardwareFitting InstructionsMaterials used:Black powder coated high strength steelProduct Dimensions:227mm (8.9'') L x 120mm (4.7'') W x 25mm (1'') HWeight:1.2kg (2.7lbs)

KRRT038T - Isuzu D-Max (2012-Current) EGR RollTrac Slimline IIConsisting of: 3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 30.46kg (67.15lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17'')Length: 1720mm (68'')Height: 240mm (9'')Shipping Weight:Weight: 31kg (68lbs)

KRID013T - Isuzu D-Max (2020-Current) Slimline II Roof Rail Rack Kit / Low Profile - by Front RunnerConsisting of: 1x FAIK003 - Isuzu D-Max (2020-Curr) Foot Rails / Low Profile1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)1x WDST010 - Wind Deflector 20mm Lip Narrow Pair /1255mm(W)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 28.42kg (62.66lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17'')Length: 1730mm (68'')Height: 260mm (10'')Shipping Weight:Weight: 30kg (66lbs)

Consists of:1 x Isuzu D-Max (2020-Current) Slimsport Rack 40'' Light Bar Wind Fairing1 x Fitting InstructionsInstallation Hardware Materials used:Black power coated steel Product Dimensions:1135mm (44.7'') L x 143mm (5.6'') W x 115mm (4.5'') H Weight:2kg (4.4lbs)

KSID003T - Isuzu D-Max (2020-Current) Slimsport Roof Rack Kit Consisting of:1x KSID001 - Isuzu Dmax (2020-Current) Slimsport Tray1x RRAC310 - Isuzu Dmax (2020-Current) Slimsport Rack Wind Fair Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Assembled Rack Kit Dimensions:1415mm (55.7'') L x 1141mm (45'') W x 121mm (4.8'') H  Approximate Installed Weight: 19.68kg (43.39lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4''-2.8'') to the highest point of your roof. Shipping Dimensions:Width: 325mm (13'')Length: 1700mm (67'')Height: 220mm (9'') Shipping Weight:Weight: 27kg (59lbs)

KSID002T - Isuzu D-Max (2020-Current) Slimsport Roof Rack Kit / Lightbar Ready Consisting of:1x KSID001 - Isuzu Dmax (2020-Current) Slimsport Tray1x RRAC309 - Isuzu D-Max (20-current) Lightbar Windfairing Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 18.75kg (41.34lbs) Assembled Rack Kit Dimensions:1410mm (55.5'') L x 1140mm (44.9'') W x 125mm (4.9'') H The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4''-2.8'') to the highest point of your roof. Shipping Dimensions:Width: 325mm (13'')Length: 1700mm (67'')Height: 220mm (9'') Shipping Weight:Weight: 24kg (53lbs)

Consists of:1 X Wind Fairing1 X Wind Fairing Mid Support2 X Wind Fairing Side Support Brackets (Left Right Hand side)2 X Light Bar Bracket High Profile (Left Right Hand side)2 X Light Bar Bracket Low Profile (Left Right Hand side)Installation HardwareFitment Guide Materials used: Black powder-coating high strength steel Product Dimensions:166mm (6.5'') L x 1148mm (45.2'') W x 160mm (6.3'') H Weight:2.77Kg (6.1lbs)

KRID014T - Isuzu D-MAX RG 3rd Gen Extended Cab (2020-Current) Slimline II Roof Rack Kit / Low Profile - by Front RunnerConsisting of: 1x FAIK004 - Isuzu D-MAX RG 3rd Gen Ex Cab (2020-Current) Foot Rails1x RRSTA05 - SLII Tray - 1165mm(W)X954mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 19.36kg (42.68lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17'')Length: 1730mm (68'')Height: 260mm (10'')Shipping Weight:Weight: 19.36kg (43lbs)

KRID011T - Isuzu D-MAX RG/3rd Gen (2020-Current) Slimline II Roof Rack Kit - by Front Runner Consisting of: 1x FAIK002 - Isuzu D-Max/Mazda BT 50 (2020-Current) Foot Rails1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 28.67kg (63.21lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17'')Length: 1730mm (68'')Height: 260mm (10'')Shipping Weight:Weight: 27.57kg (61lbs)

KRID008T - Isuzu D-Max RT50/85/2nd Gen DC (2011-Current) Slimline II Roof Rack Kit - by Front RunnerConsisting of: 1x FAIK001 - Isuzu D-Max RT50/85 2nd Gen (2011-Current) Foot Rails1x RRSTA07 - SLII Tray - 1165mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 28.16kg (62.08lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 450mm (18'')Length: 1730mm (68'')Height: 140mm (6'')Shipping Weight:Weight: 28.45kg (63lbs)

KRID010T - Isuzu D-Max X-Terrain (2020-Current) Roll Top Slimline II Load Bed Rack Kit - by Front Runner Consisting of: 2x FASS016 - Flat Feet (pair) / 65mm2x RRAC962 - Track Mount Stud Plate1x RRSTG06 - SLII Tray - 1345mm(W)X1156mm(L) Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 23.43kg (51.65lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17'') Length: 1730mm (68'') Height: 240mm (9'') Shipping Weight: Weight: 24kg (53lbs)

KRID015T - Isuzu DMax X-Terrain (2020-Current) Slimline II Load Bed Rack Kit - by Front Runner Consisting of: 3x LASS028 - Pick-Up Roll Top Leg Mount3x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair)1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L) Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 25.28kg (55.73lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17'') Length: 1730mm (68'') Height: 255mm (10'') Shipping Weight: Weight: 29kg (64lbs)

Consists of:1 x Base Drawer unit (SSDR010)1 x Drawer System Wing set1 x Isuzu Deck Set2 x Push to close latch with 2 keys per lock3 x Accessory channels6 x Eye Nuts for accessory channelsInstallation Hardware includes 4 turnbuckles to secure the unitFitting InstructionMaterials used:Aluminum - Accessory Channels Sub FrameBlack powder coated steel - Drawer Bins FrameCarpet Laminated plywood - Top Deck Deck SetProduct Dimensions:Overall Dimensions:1455mm (57.3) L x 1590mm (62.6) W x 292mm (11.5) HInterior Drawer Dimensions:Left Hand Drawer:1156mm (45.5) L x 445mm (17.5) W x 208mm (8.2) HRight Hand Drawer:1156mm (45.5) L x 445mm (17.5) W x 208mm (8.2) HWeight:93.6kg (206.4lbs)Load Rating:113Kg (250lbs) per Drawer

Consists of:1 x Base Drawer unit (SSWO008)1 x Push to close latch with 2 keys3 x Accessory Channels6 x Tie Down Rings6 x Low Lid Wolf Packs1 x Isuzu Deck set1 x Drawer System Wing setInstallation hardwareFitting InstructionMaterials used:Aluminum - Accessory Channels Sub FrameBlack powder coated steel - FrameCarpet Laminated plywood - Top Deck Deck SetProduct Dimensions:Overall Dimensions:1455mm (57.3) L x 1590mm (62.6) W x 310mm (12.2) HOuter Drawer Dimensions:1083mm (42.6) W x 1252mm (49.3) D x 310mm (12.2) HInner Drawer Dimensions:1197mm (47.1) L x 1031mm (40.6) W x 230mm (9.1) HOpen Drawer Dimensions:2163mm (85.2) L x 1083mm (42.6) W x 310mm (12.2) HWeight:81.2KG (179.0lbs)Load Rating:113Kg (250lbs)Special Notes:Items can be secured to the top deck using the 6 supplied Tie Down Rings and fitting them accordingly to the 3 accessory channels on the top deck.Drawer has a hold open feature.

KRIM001T - Isuzu MU-X (2017-2020) Slimline II Roof Rack Kit - by Front Runner Consisting of: 1 x FAIM001 - Isuzu MU-X Foot Rails - by Front Runner 1 x RRSTD10 - Slimline II Tray - 1255mm(W) X 1964mm(L) - by Front Runner   Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight 34kg (74lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.   Shipping Dimensions: Width 455mm (18'')Length 1610mm (63'')Height 240mm (9'')   Shipping Weight: Weight 39.3kg (86.5lbs)

Consists of:1 x Drawer base unit (SSDR003)1 x Isuzu MUX Deck Completion Set2 x Push to close latch with 2 keys per lock 3 x Accessory channels6 x Eye Nuts for accessory channelsInstallation HardwareFitting InstructionMaterials used:Aluminum - Accessory Channels Sub FrameBlack powder coated steel - Drawer Bins FrameUV resistant nylon Carpet Laminated Plywood - Top Deck Side DeckProduct Dimensions:728mm (28.7'') L x 1386mm (54.6'') W x 298mm (11.7'') HInterior Drawer Dimensions:Left Hand Drawer:717mm (28.2'') L x 348mm (13.7'') W x 210mm (8.3'') HRight Hand Drawer:717mm (28.2'') L x 448mm (17.6'') W x 210mm (8.3'') HWeight:59.3kg (130.7lbs)Load Rating:113Kg (250lbs) per Drawer

KRIM002T - Isuzu MU-X (2021-Current) Slimline II Roof Rack Kit - by Front Runner Consisting of: 1x FAIM002 - Isuzu MU-X (2021 - Current) Foot Rails1x RRSTD10 - SLII Tray - 1255mm(W)X1964mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 37.73kg (83.18lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17'')Length: 1730mm (68'')Height: 260mm (10'')Shipping Weight:Weight: 39kg (86lbs)

Consists of:1 x Rubber SleeveMaterials used:Cold cure elastomer polymer plasticProduct Dimensions:190mm (7.5) L x 155mm (6.1) W x 45mm (1.8) HWeight:0.13kg (0.3lbs)

Consists of:1 x Set of Nut PlatesFitting Instructions Materials used:Black powder coated steel Product Dimensions:85mm (3.3'') L x 23.5mm (0.9'') W x 5mm (0.2'') H (Single Nut Plate) Weight:0.35kg (0.77lbs)

KRJC009T - Jeep Cherokee KL (2014-Current) Slimline II Roof Rack Kit - by Front Runner Consisting of:2 x GOFR001 - Rail Foot Base (Pair) - by Front Runner 2 x GORR053 - Raised Rail Outer Grab-On / No. 4 - by Front Runner 2 x GORR072 - Raised Rail Inner Grab-On / C - by Front Runner 1 x RRSTA07 - Slimline II Tray - 1165mm(W) X 1358mm(L) - by Front Runner 1 x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair / 1165mm(W) - by Front Runner Material used:Black epoxy powder-coated T6 aluminium High strength steelApproximate Installed Weight 21kg (46lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2) to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width455mm (18)Length1610mm (63)Height 285mm (11)Shipping Weight:Weight24.3kg (53.5lbs)

KRJC002L - Jeep Cherokee Sport XJ Slimline II Roof Rack Kit - by Front Runner Consisting of: 2 x LASS101 - No 1 Leg 120mm (Pair - by Front Runner1 x LASS102 - No 2 Leg 130mm (Pair) - by Front Runner1 x RRSTG10 - Slimline II Tray - 1345mm(W) X 1964mm(L) - by Front Runner   Material used: Black epoxy powder-coated T6 aluminiumHigh strength steel Approximate Installed Weight 30kg (67lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.   Shipping Dimensions: Width 450mm (18'')Length 1615mm (64'')Height 140mm (6'')   Shipping Weight: Weight 35.2kg (77.5lbs)

KRJCT02L - Jeep Cherokee Sport XJ Slimline II Roof Rack Kit / Tall Consisting of: 1x LASS040 - Leg Spacer 10mm (Pair)3x LASS102 - No 2 Leg 130mm (Pair)1x RRSTG10 - SLII Tray - 1345mm(W)X1964mm(L) Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 30.65kg (67.57lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18'') Length: 1730mm (68'') Height: 140mm (6'') Shipping Weight: Weight: 35.26kg (78lbs)

KRJG013T - Jeep Gladiator (2019-Current) Fold-Top Slimline II Bed Rack Kit - by Front Runner Consisting of: 3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L)1x TRAC002 - Universal Track / 1400mm(L) Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 32.95kg (72.64lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17'') Length: 1730mm (68'') Height: 280mm (11'') Shipping Weight: Weight: 34kg (75lbs)

PBJG001T - Jeep Gladiator (2019-Current) Pro Bed Rack Kit Consisting of: 3x FASS025 - Foot Set / 60mm - 70mm1x PBJG001S - Jeep Gladiator (2019-Current) Pro Bed System3x RRAC921 - Canopy Rack Kit Installation Set1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 101.86kg (224.56lbs) Shipping Dimensions:Width: 645mm (25'')Length: 1720mm (68'')Height: 510mm (20'')Shipping Weight:Weight: 112kg (246lbs)

PBJG001S - Jeep Gladiator (2019-Current) Pro Bed System Consisting of:1x PBAL1250 - Pro Bed Rack Aluminium Extrusions / Medium1x PBJG001 - Pro Bed Rack Jeep Gladiator mount bracket2x PBRA001 - Pro Bed Rack Universal Structural Components Material Used:Black epoxy powder - coated T6 aluminium Approximate Installed Weight: 81.09kg (178.77lbs) Shipping Dimensions:Width: 670mm (26'')Length: 1275mm (50'')Height: 345mm (14'') Shipping Weight:Weight: 83kg (183lbs)

KRRT044T - Jeep Gladiator (2020-Current) EGR RollTrac Slimline II Load Bed Rack Kit - by Front RunnerConsisting of: 3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTG07 - SLII Tray - 1345mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 28.55kg (62.94lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17'')Length: 1730mm (68'')Height: 240mm (9'')Shipping Weight:Weight: 28.8kg (63lbs)

KRJG010T - Jeep Gladiator JT (2019-Current) Cab Over Camper Slimline II Roof Rack KitConsisting of:1x FAJL004 - Jeep Wrangler JL (2018-Curr) Front Bar RR Mount1x FAJL010 - Clamp on Pillar Support for Jeep JL1x FAJT003 - Jeep Gladiator JT (2019-Current) Foot Rail/Mini1x RRSTJ05 - SLII Tray - 1425mm(W)X954mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 20.64kg (45.5lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 530mm (21'')Length: 1730mm (68'')Height: 380mm (15'')Shipping Weight:Weight: 31kg (68lbs)

KRJG016T - Jeep Gladiator JT (2019-Current) Cab Over Camper Slimline II Roof Rack KitConsisting of:1x FAJL009 - Jeep Wrangler JL (18-Curr)Front Bar RRack Mount1x FAJT003 - Jeep Gladiator JT (2019-Current) Foot Rail/Mini1x RRSTJ05 - SLII Tray - 1425mm(W)X954mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 22.24kg (49.03lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18'')Length: 1720mm (68'')Height: 325mm (13'')Shipping Weight:Weight: 31kg (68lbs)

KRJG005T - Jeep Gladiator JT (2019-Current) Extreme Slimline II Roof Rack Kit Consisting of:1x FAJL004 - Jeep Wrangler JL (2018-Curr) Front Bar RR Mount1x FAJL010 - Clamp on Pillar Support for Jeep JL1x FAJT001 - Jeep Gladiatorr JT (2019-Curr) Foot Rails1x FAJT002 - Jeep Gladiator (2019-Curr) Inner Brackets1x RRSTJ08 - SLII Tray - 1425mm(W)X1560mm(L) Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 30.62kg (67.51lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 520mm (20'')Length: 1730mm (68'')Height: 450mm (18'') Shipping Weight:Weight: 40.97kg (90lbs)

KRJG014T - Jeep Gladiator JT (2019-Current) Extreme Slimline II Roof Rack Kit Consisting of:1x FAJL009 - Jeep Wrangler JL (18-Curr)Front Bar RRack Mount1x FAJT001 - Jeep Gladiatorr JT (2019-Curr) Foot Rails1x FAJT002 - Jeep Gladiator (2019-Curr) Inner Brackets1x RRSTJ08 - SLII Tray - 1425mm(W)X1560mm(L) Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 32.22kg (71.03lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 445mm (18'')Length: 1720mm (68'')Height: 315mm (12'') Shipping Weight:Weight: 41kg (90lbs)

KRJG003 - Jeep Gladiator JT (2019-Current) Load Bed Load Bar Kit Consisting of: 2x LASS026 - Universal Load Bed Leg / Tall (Pair)1x LBSK016 - Roof Load Bar Pair 1425mm(W)1x RRAC901 - Load Bed Nut Kit- Toyota Tacoma 2004+/Tundra 2007+ Material Used: Black epoxy powder - coated T6 aluminium Approximate Installed Weight: 7.57kg (16.69lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8'') to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8'') to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8'') to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 200mm (8'') Length: 1530mm (60'') Height: 130mm (5'') Shipping Weight: Weight: 8kg (18lbs)

KRCA092T - Jeep Gladiator JT (2019-Current) RSI Smart Canopy Slimline II Rack Kit - by Front Runner Consisting of: 3x FASS012 - Foot Set / 40mm - 50mm3x RRAC921 - Canopy Rack Kit Installation Set1x RRSTG07 - SLII Tray - 1345mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 24.65kg (54.34lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18'')Length: 1720mm (68'')Height: 155mm (6'')Shipping Weight:Weight: 25kg (55lbs)

KRJG002T - Jeep Gladiator JT (2019-Current) Slimline II Load Bed Rack Kit - by Front Runner Consisting of: 2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x RRAC901 - Load Bed Nut Kit / Toyota Tacoma 2004+/Tundra 2007+ - by Front Runner1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner   Material used: Black epoxy powder-coated T6 aluminiumHigh strength steel Approximate Installed Weight 24kg (52lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.   Shipping Dimensions: Width 455mm (18'')Length 1610mm (63'')Height 280mm (11'')   Shipping Weight: Weight 27.6kg (60.7lbs)

KRJG009T - Jeep Gladiator JT (2019-Current) Slimline II Roof Rack Kit Consisting of: 1x LASS027 - Leg Spacer 6mm (Pair)3x LASS035 - Jeep JL/JT Mounting Leg / 130mm (Pair)2x LASS040 - Leg Spacer 10mm (Pair)1x RRSTM05 - SLII Tray - 1475mm(W)X954mm(L)1x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 23.26kg (51.28lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18'')Length: 1730mm (68'')Height: 280mm (11'')Shipping Weight:Weight: 25.4kg (56lbs)

KRJG007T - Jeep Grand Cherokee (1999-2010) Grab-On Slimline II Roof Rack Kit - by Front Runner Consisting of:2 x GOFR001 - Rail Foot Base (Pair) - by Front Runner 2 x GORR051 - Raised Rail Outer Grab-On / No. 2 - by Front Runner 2 x GORR071 - Raised Rail Inner Grab-On / B - by Front Runner 1 x RRSTA07 - Slimline II Tray - 1165mm(W) X 1358mm(L) - by Front Runner 1 x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair / 1165mm(W) - by Front Runner Material used:Black epoxy powder-coated T6 aluminium High strength steelApproximate Installed Weight 21kg (46lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2) to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width455mm (18)Length1610mm (63)Height 285mm (11)Shipping Weight:Weight24.3kg (53.5lbs)

A roof rack is an invaluable storage carrying tool for anyone serious about adventure. This lightweight, modular roof rack is designed specifically for the Jeep Grand Cherokee WKII. The Slimline II Roof Rack is compatible with over 55 accessories tailored to a wide range of sports and adventure gear. Get kitted today.

Upgrade your Jeep Grand Cherokee WK2’s storage carrying capacity so that you can gear up for any adventure, with the Slimline II Roof Rack. The Slimline II’s lightweight, modular construction allows you to customize it with a variety of accessories that suit your lifestyle, adventure sport, and travels.

KRJG004T - Jeep Grand Cherokee WK2 (2011-Current) Slimline II Roof Rack Kit - by Front Runner Consisting of:1 x FAJG001 - Jeep Grand Cherokee Foot Rails - by Front Runner 1 x RRSTD08 - Slimline II Tray - 1255mm(W) X 1560mm(L) - by Front Runner Material used:Black epoxy powder-coated T6 aluminium High strength steelApproximate Installed Weight 27kg (60lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2) to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width450mm (18)Length1615mm (64)Height 140mm (6)Shipping Weight:Weight31.5kg (69.3lbs)

KRJL003T - Jeep Liberty KK (2008-2012) Slimline II Roof Rack Kit - by Front Runner Consisting of: 1 x FAJL001 - Jeep Liberty KK (2008-2012) Foot Rails - by Front Runner 1 x RRSTG08 - Slimline II Tray - 1345mm(W) X 1560mm(L) - by Front Runner Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight 28kg (62lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicles rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width450mm (18'')Length720mm (28'')Height 300mm (12'') Shipping Weight: Weight32.9kg (72.4lbs)

KRJP001T - Jeep Patriot (2006-2016) Slimline II Roof Rack Kit - by Front Runner Consisting of:2 x GOFR001 - Rail Foot Base (Pair) - by Front Runner 2 x GORR052 - Raised Rail Outer Grab-On / No. 3 - by Front Runner 2 x GORR070 - Raised Rail Inner Grab-On / A - by Front Runner 1 x RRSTA07 - Slimline II Tray - 1165mm(W) X 1358mm(L) - by Front Runner 1 x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair / 1165mm(W) - by Front Runner Material used:Black epoxy powder-coated T6 aluminium High strength steelApproximate Installed Weight 21kg (46lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2) to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width455mm (18)Length1610mm (63)Height 285mm (11)Shipping Weight:Weight24.3kg (53.4lbs)

KRJR002T - Jeep Renegade (2014-Current) Slimline II Roof Rail Rack Kit - by Front Runner Consisting of: 3x GOFR001 - Rail Foot Base (Pair)3x GORR052 - Raised Rail Outer Grips / No. 33x GORR071 - Raised Rail Inner Grips / B2x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair)1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)1x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair /1165mmMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 26.88kg (59.26lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 455mm (18'')Length: 1730mm (68'')Height: 285mm (11'')Shipping Weight:Weight: 32.43kg (71lbs)

KRJW031T - Jeep Wrangler 4xe (2021-Current) Slimline II 1/2 Roof Rack Kit Consisting of: 2x LASS027 - Leg Spacer 6mm (Pair)4x LASS035 - Jeep JL/JT Mounting Leg / 130mm (Pair)1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L)1x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 30kg (66.14lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17'') Length: 1730mm (68'') Height: 265mm (10'') Shipping Weight: Weight: 31.6kg (70lbs)

KRJW030T - Jeep Wrangler 4xe (2021-Current) Slimline II 1/2 Roof Rack Kit / Tall - by Front Runner Consisting of: 1x LASS027 - Leg Spacer 6mm (Pair)4x LASS036 - Jeep JL/JT Mounting Leg / 170mm (Pair)1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L) Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 32.7kg (72.09lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17'') Length: 1730mm (68'') Height: 260mm (10'') Shipping Weight: Weight: 32kg (70lbs)

KRJW002T - Jeep Wrangler JK 2 Door (2007-2018) Extreme Slimline II 1/2 Roof Rack Kit - by Front Runner Consisting of: 1 x FAJK010 - Jeep Wrangler JK 2 Door New Foot Rails - by Front Runner 1 x FAJK011 - Jeep Wrangler JK 2 Door New Inner Brackets - by Front Runner 1 x RRSTJ05 - Slimline II Tray - 1425mm(W) X 954mm(L) - by Front Runner 1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner   Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight 24kg (54lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.   Shipping Dimensions: Width 455mm (18'')Length 1610mm (63'')Height 250mm (10'')   Shipping Weight: Weight 28.4kg (62.6lbs)

KRJW001T - Jeep Wrangler JK 2 Door (2007-2018) Extreme Slimline II Roof Rack Kit - by Front Runner Consisting of: 1 x FAJK009 - Jeep Wrangler JK 2 Door 4 Door Front Pillar Brackets - by Front Runner 1 x FAJK010 - Jeep Wrangler JK 2 Door New Foot Rails - by Front Runner 1 x FAJK011 - Jeep Wrangler JK 2 Door New Inner Brackets - by Front Runner 1 x RRSTJ09 - Slimline II Tray - 1425mm(W) X 1762mm(L) - by Front Runner 1 x WDST006 - Wind Deflector 45mm Lip Wide Pair / 1345mm(W) - by Front Runner   Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight 37kg (82lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.   Shipping Dimensions: Width 455mm (18'')Length 1725mm (68'')Height 400mm (16'')   Shipping Weight: Weight 43.1kg (94.8lbs)

KRJW004T - Jeep Wrangler JK 4 Door (2007-2018) Extreme Slimline II 1/2 Roof Rack Kit - by Front Runner Consisting of: 1 x FAJK007 - Jeep Wrangler JK 4 Door Inner Brackets - by Front Runner 1 x FAJK008 - Jeep Wrangler JK 4 Door Foot Rails - by Front Runner 1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner 1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner   Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight 31kg (69lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.   Shipping Dimensions: Width 455mm (18'')Length 1610mm (63'')Height 315mm (12'')   Shipping Weight: Weight 36.5kg (80.3lbs)

KRJW003T - Jeep Wrangler JK 4 Door (2007-2018) Extreme Slimline II Roof Rack Kit - by Front Runner Consisting of: 1 x FAJK007 - Jeep Wrangler JK 4 Door Inner Brackets - by Front Runner 1 x FAJK008 - Jeep Wrangler JK 4 Door Foot Rails - by Front Runner 1 x FAJK009 - Jeep Wrangler JK 2 Door 4 Door Front Pillar Brackets - by Front Runner 1 x RRSTJ12 - Slimline II Tray - 1425mm(W) X 2368mm(L) - by Front Runner   Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight 46kg (101lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.   Shipping Dimensions: Width 450mm (18'')Length 1725mm (68'')Height 340mm (13'')   Shipping Weight: Weight 53.6kg (117.9lbs)

Consists of:16 x Seal Bolt Assemblies Fitting InstructionsMaterials used:Plated boltPU gasketNitrile O-RingPowder coated WasherProduct Dimensions:43mm (1.7'') L x 30mm (1.2'')Weight:320g (11.3oz)

KRJW034T - Jeep Wrangler JKU 4 Door (2007-2018) Extreme Pro Slimline II Roof Rack Kit - by Front Runner Consisting of:1x FAJK012 - Jeep Wrangler JK Inner Brackets1x RRSTJ08 - SLII Tray - 1425mm(W)X1560mm(L)1x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 39.01kg (86lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 455mm (18'')Length: 1720mm (68'')Height: 260mm (10'') Shipping Weight:Weight: 48kg (106lbs)

Consists of:1 x Drawer Base Unit with 1 drawer (SSDR011)1 x Jeep Wrangler JK Drawer Deck Completion Set (SSDS112)1 x Jeep Wrangler JKU Drawer Brace (SSST002)2 x Accessory channels4 x Eye Nuts for accessory channelInstallation HardwareFitting InstructionsMaterials used:Aluminum - Accessory Channels Sub FrameBlack powder coated steel - Drawer Bins FrameCarpet Laminated plywood - Top Deck, Side Rear DeckProduct Dimensions:720mm (28.4'') L x 1088mm (42.8'') W x 270mm (10.6'') HInterior Drawer Dimensions:497mm (19.6'') L x 716mm (28.2'') W x 180mm (7.1'') HWeight:38.1kg (84bs)

Material used: Brackets: high strength steel and black powder coated Slats: Black powder coated aluminium Product Dimensions: W 1475mm (58.1) x D 550mm (21.7) x H 50mm (1.96) Weight: 25.54kg (56.31lbs)

Consists of:1 x Flat Roller Drawer1 x Front Mounting StrapInstallation HardwareMaterials used:Black powder-coated mild steelProduct Dimensions:852mm (33.5) L x 898mm (35.4) W x 128mm (5) HInternal Tray Dimensions:778mm (30.6) L x 780mm (30.7) W x 60mm (2.4) DWeight:29kg (63.9lbs)Load Rating:113 kg (250lbs)

KRJW006T - Jeep Wrangler JL 2 Door (2018-Current) Extreme Slimline II 1/2 Roof Rack Kit - by Front Runner Consisting of: 1 x FAJL005 - Jeep Wrangler JL 2- Door (2018-Curr) Foot Rails1 x FAJL006 - Jeep Wrangler JL 2 Door (2018-Current) Inner Brackets - by Front Runner1 x RRSTJ05 - Slimline II Tray - 1425mm(W) X 954mm(L) - by Front Runner1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 28.1kg (62.0lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot, Grab-on Foot or Strap-On Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 445mm (18.0'')Length: 1725mm (68.0'')Height: 265mm (10.0'') Shipping Weight:29.2kg (64.0lbs)

KRJW005T - Jeep Wrangler JL 2 Door (2018-Current) Extreme Slimline II Roof Rack KitConsisting of:1x FAJL004 - Jeep Wrangler JL (2018-Curr) Front Bar RR Mount1x FAJL005 - Jeep Wrangler JL 2- Door (2018-Curr) Foot Rails1x FAJL006 - Jeep Wrangler JL 2-Door (2018-Curr) Inner Brackets1x FAJL010 - Clamp on Pillar Support for Jeep JL1x RRSTJ09 - SLII Tray - 1425mm(W)X1762mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 37.7kg (83.11lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 515mm (20'')Length: 1730mm (68'')Height: 470mm (19'')Shipping Weight:Weight: 45.2kg (99lbs)

KRJW035T - Jeep Wrangler JL 2 Door (2018-Current) Extreme Slimline II Roof Rack Kit Consisting of: 1x FAJL005 - Jeep Wrangler JL 2- Door (2018-Curr) Foot Rails1x FAJL006 - Jeep Wrangler JL 2-Door (2018-Curr) Inner Brackets1x FAJL009 - Jeep Wrangler JL (18-Curr)Front Bar RRack Mount1x RRSTJ09 - SLII Tray - 1425mm(W)X1762mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 38.11kg (84.02lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17'')Length: 1720mm (68'')Height: 320mm (13'')Shipping Weight:Weight: 47kg (103lbs)

KRJW026T - Jeep Wrangler JL 2 Door (2018-Current) Slimline II 1/2 Roof Rack Kit - by Front Runner Consisting of: 1x LASS027 - Leg Spacer 6mm (Pair)3x LASS035 - Jeep JL/JT Mounting Leg / 130mm (Pair)1x RRSTM05 - SLII Tray - 1475mm(W)X954mm(L)1x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 26.41kg (58.22lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 455mm (18'') Length: 1730mm (68'') Height: 175mm (7'') Shipping Weight: Weight: 26kg (57lbs)

KRJW033T - Jeep Wrangler JL 2 Door (2018-Current) Slimline II 1/2 Roof Rack Kit / Tall - by Front Runner Consisting of: 1x LASS027 - Leg Spacer 6mm (Pair)3x LASS036 - Jeep JL/JT Mounting Leg / 170mm (Pair)1x RRSTM05 - SLII Tray - 1475mm(W)X954mm(L) Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 26.03kg (57.39lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17'') Length: 1730mm (68'') Height: 260mm (10'') Shipping Weight: Weight: 26.6kg (59lbs)

KRJW023T - Jeep Wrangler JL (2017-Curr) 1/2 Extreme RR Kit Consisting of:1 x FAJL002 - Jeep Wrangler JL (2018-Current) Foot Rails - by Front Runner 1 x FAJL003 - Jeep Wrangler JL 4 Door (2018-Current) Inner Brackets - by Front Runner 1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner Material used:Black epoxy powder-coated T6 aluminium High strength steelApproximate Installed Weight 29kg (64lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2) to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width455mm (18)Length1610mm (63)Height 255mm (10)Shipping Weight:Weight33.8kg (74.4lbs)

KRJW022T - Jeep Wrangler JL 4 Door (2018-Current) Extreme Slimline II Roof Rack KitConsisting of:1x FAJL002 - Jeep Wrangler JL (2018-Curr) Foot Rails1x FAJL003 - Jeep Wrangler JL (2018-Curr) Inner Brackets1x FAJL004 - Jeep Wrangler JL (2018-Curr) Front Bar RR Mount1x FAJL010 - Clamp on Pillar Support for Jeep JL1x RRSTJ12 - SLII Tray - 1425mm(W)X2368mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 44.54kg (98.19lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 455mm (18'')Length: 1730mm (68'')Height: 255mm (10'')Shipping Weight:Weight: 53.96kg (119lbs)