Discovery 4 3.0LT SDV6 Updated Software

DPL remap tuning for the 3.0 TDV6 and SDV6 is revered the world over for its outstanding results. Not only will you get a massive increase in power and torque, but also greatly improved throttle response and a smoother, more refined driving experiance overall.

Typical power gains do vary from one vehicle to the next, but on average we usually see results as follows:

• 6 Speed Models (Euro 5): Stock 245hp > Alive Tuned 290hp
• 8 Speed Models (Euro 5): Stock 255hp > Alive Tunied 300hp
• 2016 Models (Euro 6 with AdBlue): Stock 255hp > Alive Tuned 330hp

By extracting the vehicles standard factory map, we are then able to adjust different settings, i.e. when different gears engage at different times, fuel consumption & other key components, once this has been achieved we then put the modified map back into your ecu.

After this has been done, you will notice a signifigant difference in your acceleration with the benifit of more power & torque through the lower gears and over all a reduction in your fuel consumption also.

The Land Rover Discovery 2 V8 with updated Engine Control Unit (ECU) software can offer several benefits:

1. Improved Performance: Updated ECU software can optimize engine performance by adjusting various parameters such as fuel delivery, ignition timing, and air-to-fuel ratio. This can result in increased horsepower and torque, providing a more powerful and responsive driving experience.

2. Enhanced Fuel Efficiency: The updated software can optimize fuel delivery and engine management, leading to improved fuel efficiency. By achieving better combustion and optimizing power output, you may experience reduced fuel consumption, resulting in cost savings over time.

3. Smoother Gear Shifts: The ECU software can also optimize the transmission system, leading to smoother gear shifts. This can enhance the overall driving experience, especially during acceleration and when towing heavy loads.

4. Enhanced Driveability: With updated ECU software, the engine's response to throttle inputs can be improved, making the vehicle more drivable in different conditions. The software can adjust parameters to optimize performance based on factors such as engine load, altitude, and temperature.

See the below link for the results of the remap from our run on the dyno

https://davisperformance.com.au/images/V1%20UPGRADE%20VS%20STANDARD.pdf

***Note: ECU not included in price, Image for reference only.